• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.41-51
• /
• 1991

This study was conducted to determine the effect of 20 years long term fertilizations on the physical and chemical properties of paddy soil and the growth, yield, yield components and grain development of rice. Non-fertilized, PK, NK, NP, NPK, NPK + compost, NPK+straw and NPK+lime have been applied since 1968 after surface paddy soil was removed. NPK+compost and NPK+straw applications increased the content of organic matter, available P and CEC, and lime increased soil acidity and SiO$_2$ content. While chemical contents in non-fertilized treatment were low as compared with other treatments. Soil porosity was higher in NPK+straw (51.4%) and NPK+lime(53.1%) than in NPK application (49.8%). Soil hardness was highest in the NPK application and was lowest in the NPK + lime. Continuous application of straw with NPK markedly increased the content of aggregate with over 1mm(19.6%) as compared with NPK application (7.1%). Plant height, tiller number, root number, leaf area index and total dry weight were higher in the applications of compost, straw and lime with NPK than in any other treatments. Brown rice yield in non-fertilized, PK and NP applications was decreased 45, 55, 15 and 5% of that in NPK application, respectively, while application of compost, straw and lime with NPK increased the yield by 11, 14 and 4%, respectively, during 20 years. The number of differentiated rachis branchs in the application of compost, straw and lime was 17 to 21 and that in the other application was 13 to 15, whereas the degenerated rachis branchs was low in the application of compost, straw and lime with NPK. The applications having higher level of perfect rice grain such as non-fertilized, NPK+compost, NPK+straw and NPK+lime had high grain weight and had low level of white core rice, white belly rice. The white core and belly rice was highest in the NP application and notched belly rice kernel was markedly increased in NK and NP applications. The period of grain filling was 30 DAH at NP and NPK applications, 35 DAH at NK and NPK+lime, 40DAH at NPK+compost and NPK+ straw, and 45DAH at non-fertilized, respectively.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.218-238
• /
• 2022

The loss of Korean sovereignty by Japan in 1910 was an unforgettable national humiliation of Korea who maintained the sovereignty for 5000 years. The process of Korea annexation into Japan was reviewed and its consequences to the food and nutritional status of Koreans were analyzed by using the records in Korea as well as in overseas. The records of the colonial Government-General of Joseon shows superficial figures distorting the actual life of Koreans at that time. Japan extorted 45% of rice and 44% of soybeans produced in Korea in 1933, and imported poor quality long-grain rice (Indica type) to replace partly the extorted rice. The food and nutritional situation of Koreans was miserable, and hunger and malnutrition were prevalent in the country for the 36 years. The height of Koreans became smaller than Japanese, who was called as 'little people (Oein)' in Korea historically.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.spc
• /
• pp.15-18
• /
• 2008

This study was conducted to analyze the rice yield and grain quality of viviparous germinated seeds caused by long period rainy days. In the yield characteristics, the milled/brown rice rates in two cultivars, Unkwangbyeo and Gopumbyeo were 86.0 and 80.9%, respectively, in viviparous germinated seeds, showing the decreased rates by 3.2 and 6.2%, respectively, as compared to 89.2 and 87.1% in normal seeds. Rice yield in Unkwangbyeo and Gopumbyeo also decreased by 5 and 7%, respectively, in viviparous germinated seeds as compared to normal seeds. Peak viscosity and set back of viviparous germinated seeds were decreased, and the hardness of them was increased compared to normal seeds. Color value (a) of viviparous germinated seeds was 0.90, showing lower value than that (1.65) of normal seeds of Gopumbyeo. The results demonstrated that as the viviparous germinating rate was increased, the grain quality was deteriorated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.2
• /
• pp.99-106
• /
• 2011

Here we reported an analyzing result for the relationship between climatic variables and rice(c.v. Odaebyeo and Ilpumbyeo) yield characteristics (including some growth characteristics) based on a long-term observed data at GARES and at KMA for rice and weather, respectively. Most of crop parameters investigated, such as heading date, culm height, panicle number $m^{-2}$, grain number $panicle^{-1}$ ripening rate, 1,000 grain weight and yield were strongly affected by wind velocity and relative humidity, as well as by daily mean air temperature, precipitation, sunshine hours and daily variations in air temperature depending on variety and crop developmental stages. Air velocity and relative humidity had not been studied as climatic variables affecting on the characteristics of rice growth and yield, however, they turned out to affect all the characteristics of rice investigated, especially ripening rate and yield, as much as any other climatic variables in this study. Air velocity appeared to affect highly the culm height and yield of Odaebyeo and ilpumbyeo. Relative humidity appeared to affect highly grain number and ripening rate of Odaebyeo and yield of Ilpumbyeo. Consequently Rice yield revealed to increase in the climatic conditions of high air velocity and low relative humidity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.819-825
• /
• 2016

Monitoring of soil fertility and crop productivity in long-term application of silicate fertilizers is necessary to use fertilizers efficiently. This study was conducted to investigate effects of continuous application of silicate fertilizer for rice cultivation from 1969 to 2014. The treatments were no silicate fertilizer treatments (N, NC, NPK, and NPKC) and silicate fertilizer treatments (N+S, NC+S, NPK+S, and NPKC+S). The 46-yr input of $2\;ton\;ha^{-1}yr^{-1}$ of silicate fertilizer increased pH 0.6 ~ 1.1 and exchangeable Ca $2.0{\sim}2.4cmol_c\;kg^{-1}$ in silicate fertilizer treatments (N+S, NC+S, NPK+S, and NPKC+S) compared with no silicate fertilizer treatments (N, NC, NPK, and NPKC) because silicate fertilizer included Ca component. Also, available silicate concentrations of silicate fertilizer treatments (N+S, NC+S, NPK+S, and NPKC+S) increased $169mg\;kg^{-1}$ compared to no silicate fertilizer treatments. In Period II ('90~'14), the mean annual Si field balance varied from 62 to $175kg\;ha^{-1}yr^{-1}$ in silicate fertilizer treatments, indicating continuous accumulation of soil Si. Silicon uptake and grain yield of rice had greater differences between N treatment and N+S treatment than other treatments. This showed that the application of silicate fertilizer had greater effect in nutrient-poor soils than in proper nutrient soils. Thus the application of silicate fertilizer led to improvement the fertility of soil and increasement of rice production for the lack of soil nutrients.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.4
• /
• pp.233-239
• /
• 2015

Monitoring of soil fertility and crop productivity in long-term application of fertilizers is necessary to use fertilizers efficiently. This study was conducted to investigate effects of continuous application of lime for rice cultivation from 1969 to 2014. The treatments were no lime treatments (N, NPK, NPKC, and NPKS) and lime treatments (N+L, NPK+L, NPKC+L, and NPKS+L). The application of lime in addition to N, NPK, and NPKC tended to increase pH, exchangeable Ca, and available $SiO_2$. The input of mean annual $1,170Mg\;ha^{-1}yr^{-1}$ of lime increased pH $0.0042yr^{-1}$, $0.0062yr^{-1}$, $0.0127yr^{-1}$, and $0.0041yr^{-1}$ in lime treatments (N+L, NPK+L, NPKS+L, and NPKC+L) compared with no treatments (N, NPK, NPKS, and NPKC), respectively. The mean annual Ca field balance varied from 169 to $561kg\;ha^{-1}yr^{-1}$in no treatments, from 871 to $1,263kg\;ha^{-1}yr^{-1}$ in lime treatments, indicating that Ca was accumulated in the soils. The mean annual Ca field balance in silicate fertilizer treatments (NPKS, NPKS+L) were higher than that of other treatments because silicate fertilizer included Ca component. Grain yield of rice had no significant differences between no lime treatments and lime treatments. Thus the application of lime led to changes in soil chemical properties but had no impact on the production of rice.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.95-95
• /
• 2017

Lodging is a serious issue in rice production, because it drastically decreases the biomass production and grain yield. Since the Green Revolution, the lodging resistance has been increased by lowering the moment of above-ground parts due to the short culm by the semi-dwarf gene sd1. However, it has been pointed out that sd1 alone has suppressive effects for biomass production and yield. To increase rice yield, the long-culm and large panicle type varieties with a superior lodging resistance need to be developed. To improve the lodging resistance and yield of these type varieties, it would be effective to identify novel alleles for these traits underlying natural variations in rice and to pyramid these alleles to a single rice variety. In order to perform this strategy, we have developed new rice lines derived from crosses among varieties with superior alleles. At first, TULT-gh-5-5 was selected from a cross between strong culm and high biomass variety Leaf Star and high-yielding variety Takanari, and TUAT-32HB was selected from a cross between high-yielding variety Akenohoshi and Takanari. Then, we developed the super thick-culm and super grain-bearing line, LTAT-29 derived from a cross between TULT-gh-5-5 and TUAT-32HB. In the current study, to identify the QTLs and genes relating to the strong culm and the high yield of LTAT-29, we performed QTL analysis using SNPs markers with $F_2$ population derived from a cross between LTAT-29 and Takanari. LTAT-29 has never lodged throughout the growth period despite it had long culms and heavy panicles. LTAT-29 had a larger outer diameter of the culm and twice the size of the section modulus than Takanari. As a result, the bending moment at breaking of LTAT-29 was significantly larger than that of Takanari. Brown rice yield of LTAT-29 was $9.2t\;ha^{-1}$ about 10% higher than that of Takanari due to the larger number of spikelets per panicle. LTAT-29 had a greater number of secondary branches per panicle. In the $F_2$ population between LTAT-29 and Takanari, we found continuous frequency distributions in the section modulus and the spikelet number per panicle. Two QTLs increased the section modulus by the alleles of LTAT-29 were detected on Chr.1L and Chr.2L. One QTL increased the spikelet number per panicle of Takanari by the allele of LTAT-29 was detected on Chr.1L, and two QTLs increased the number of secondary branches per panicle by the alleles of LTAT-29 were detected on Chr.1L and Chr.4L. It was found that the alleles of these QTLs were the japonica type originated from Leaf Star or Akenohoshi. The novel QTLs for the traits related to super thick-culm and super grain-bearing and their combinations could be utilized for improving the lodging resistance and yield in rice varieties.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.04a
• /
• pp.28-29
• /
• 2005

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.262-275
• /
• 2023

This study aimed to assess the preferences of African, American, and Asian panels, in comparison to a Korean panel, for various Korean rice varieties, including three japonica, two indica, and one Tongil-type, all developed by the Rural Development Administration in Korea. Regarding rice appearance, most panelists, except for the Koreans, favored long and slender rice varieties like 'Hanyeol', 'Hyangyeol', and 'Amissal'. In contrast, the Koreans preferred wider varieties like 'Sindongjin' and 'Deuraehyang'. Notably, the overseas panelists consistently favored rice varieties with high appearance quality in sensory evaluations of cooked rice. Both overseas and Korean panelists strongly preferred the indica rice variety 'Hanyeol' in terms of appearance quality and sensory evaluations. However, Korean rice varieties like 'Amissal' and 'Sindongjin' scored high in appearance quality with overseas panelists but received low ratings in sensory aspects, including shape, stickiness, and taste, compared to those for 'Hanyeol'. This suggests that considering sensory characteristics is important when exporting Korean rice varieties. Regarding taste characteristics preferred by the panelists derived from the correlation analysis between taste traits, Africans preferred rice with a smooth texture and no stickiness, especially favoring long-grain rice. Americans leaned towards rice with a slightly firm texture, some stickiness, and late aging characteristics. Asians preferred rice with a smooth texture, low stickiness, and long-grain varieties. In contrast, Koreans favored round rice with a glossy appearance, a slightly firm texture, late aging traits, and some stickiness. These research findings can serve as valuable data for the development of rice varieties for overseas markets and are expected to contribute to securing competitiveness in international markets.