• Tribology and Lubricants
• /
• 제20권4호
• /
• pp.183-189
• /
• 2004

The floating ring seal is used in an oxidizer and a fuel pump of the turbo pump unit in the liquid rocket engine to optimize a leakage without rubbing phenomenon. The damper floating ring seal, one of the floating ring seals, is with round hole pattern surfaces. It can reduce the leakage by increased friction factor that obtained from experimental data. In this paper, the leakage test about floating ring seal and damper floating ring seal was conducted. The test result showed the leakage performance of damper floating ring seal was better than the leakage performance of floating ring seal. With the leakage test the lock-up and rotation test about seal was conducted and that position is measured. The relatively large lock-up eccentric ratio was obtained from the test result of damping floating ring seal. The attitude angle of seal increases with increasing of shaft rotation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.820-825
• /
• 2004

The floating ring seal is used in an oxidizer and a fuel pump of the turbo pump unit in the liquid rocket engine to optimize a leakage without rubbing phenomenon. The damper floating ring seal, one of the floating ring seals, is with round hole pattern surfaces. It can reduce the leakage by increased friction factor that obtained from experimental data. In this paper, the leakage test about floating ring seal and damper floating ring seal was conducted. The test result showed the leakage performance of damper floating ring seal was better than the leakage performance of floating ring seal. With the leakage test the lock-up and rotation test about seal was conducted and that position is measured. The relatively large lock-up eccentric ratio was obtained from the test result of damping floating ring seal. The attitude angle of seal increases with increasing of shaft rotation

• Tribology and Lubricants
• /
• 제21권3호
• /
• pp.122-129
• /
• 2005

The floating ring seal has the ability of minimizing clearance without rubbing phenomenon. However, the seal ring can be unstable due to extremely high lock-up eccentricity ratio arisen from the poor design of height and surface finish of the ring. The exact prediction of the lock-up position of the floating ring is necessary to design the floating ring properly. The governing equations are developed and solved numerically. The test facility for the measurement of the boundary-lubrication-friction coefficient of the ring‘s surface has been established. Based on the results of analysis, the geometric conditions of the floating ring seal are suggested for operating at a low lock-up eccentricity ratio.

• 대한방사선치료학회지
• /
• 제26권1호
• /
• pp.37-42
• /
• 2014

목 적 : Belly board를 사용한 골반부 치료 시 엎드린 자세로 인해 set-up의 재현성이 다른 치료부위에 비해 떨어진다. 이에 본 연구에서는 기존의 belly board만 사용 시 발생했던 단점들을 보완하기 위해 VLT belly board(Vac-lock type belly board)를 자체 제작하여 그 유용성을 검증하고 set-up의 재현성을 높이고자 한다. 대상 및 방법 : 기존의 belly board를 사용하여 치료한 환자의 OBI 영상과 자체 제작한 VLT belly board를 사용하여 치료한 환자의 OBI 영상을 비교하였다. OBI는 전체 치료과정 중 3번을 시행하였는데, AP 방향, LAT 방향에서 각각 실시하였다. 2차원정합을 이용하여 X축 좌 우방향, Y축 상 하방향, Z축 전 후방향에서 발생하는 set-up에 대한 오차를 측정하여 비교 분석하였다. 결 과 : 영상 2차원 정합을 이용한 set-up의 평균 오차는 X축 방향으로는 0.32 cm에서 0.12 cm으로, Y축 방향으로는 0.41 cm에서 0.19 cm으로, Z축 방향으로는 0.29 cm에서 0.17 cm으로 VLT belly board 사용한 결과의 평균 오차가 감소하였다. 또한 VLT belly board 사용 시 0~0.29 cm의 오차가 48%에서 83%로 증가되고 0.5 cm 이상의 오차가 21%에서 2%로 감소를 보였다. 결 론 : VLT belly board 사용은 기존의 belly board 사용에 대한 효과를 유지하면서 환자 개인의 특성에 맞는 Vac-lock 제작을 통하여 set-up의 오차를 줄여줄 수 있음을 확인했다. 따라서 엎드린 자세로 골반부 치료 시 VLT belly board는 매우 유용할 것이라고 사료된다.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.349-356
• /
• 2003

A damper floating ring seal with round hole pattern surfaces is suggested for better leakage control. The flat plate test of the round hole pattern surfaces has been performed to yield an empirical friction factor model. The exact predictions of the lock­up position of the damper floating ring, the leakage performance, and the rotordynamic coefficients of the seal are necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations including the empirical friction factor model for round hole pattern surfaces are solved by the Fast Fourier Transform method. The lock­up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the damper floating ring seal. Theoretical results show that the damper floating ring seals yield less leakage and better rotordynamic stability than the floating ring seal with a smooth surface.

• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.29-38
• /
• 2001

The floating ring seal has the ability of minimizing clearance without the rubbing phenomenon. It is often used in the turbo pump units of liquid rocket engines due to its superior leakage performance. The exact prediction of the lock-up position of the floating ring, the leakage performance, and the rotordynamic coefficients of the seal is necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations(which are based on the Bulk-flow Model) we solved by the Fast Fourier Transform method. The lock-up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the floating ring seal.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.471-477
• /
• 2003

The floating ring seal is often used in the turbopump (TP) unit of liquid rocket engine (LRE) owing to its inherent ability of minimizing the leakage flow and superior dynamic characteristics as well. This paper describes the test results concerned with the lock-up and dynamic characteristics of the floating ring seals in the turbopump. The characteristics of the floating ring seals were extracted from the frequency response function (FRF) by instrumental variable method. The experiment was tested at 7.0MPa and 0-24,800 rpm. And the test results were introduced about the dynamic characteristics of floating ring seal related with the eccentricity and attitude angle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.186-187
• /
• 2006

The development of SFCL (Superconducting Fault Current Limiter) is getting more important as the power demand is increased rapidly. Up to now, several kinds of SFCL have been proposed and it is expected that they will be applied to appropriate position considering their own properties. Amongst those proposed SFCL, flux-lock type SFCL using the magnetic cancelation for current limiting has the advantages of overcoming the technical difficulties that other types of SFCLs have. In this paper, the integrated three-phase flux-lock type SFCL was fabricated and its operational modes were investigated through the short circuit tests. The operational mode were to divided into four mode according to the variation of the currents flowing into the secondary winding connected the superconducting elements and the speed of the quench generation. It was expected that the improvement of current limiting characteristics of the SFCL could be possible through control of the operational mode.

• Journal of Oral Medicine and Pain
• /
• 제19권1호
• /
• pp.93-103
• /
• 1994

In order to evaluate thelong-term results of conservative treatment on TMJ closed lock, a follow-up study of thirst-two patients was performed 2 to 7 year after treatment. Evaluating method included the questionnaire, clinical examination, transcranial radiograph and mandibular kinesiography. The results were as follows : Seventy-eight percents of patients reported that symptoms were reduced completely or considerably. Recurrent headache was improved after treatment (72 percents of success rate). There was a significant decrease in VAS after treatment and at follow-up comparing with that of before treatment(p<0.01). Most common variable of Helkimo's clinical dysfunction index at follow-up was impared TMJ function. There was a significant decrease in Fricton's craniomandibular index and dysfunction index(p<0.01) Mean interincisal distance was increased by 14.07mm after treatment and was also increased at follow-up by 2.80mm comparing with that of after treatment(p<0.01). Before treatment, condylar translation measurements of affected and non-affected sides on the transcranial radiograph were 4.89±3.20mm and 9.09±3.73mm respectively and at follow- up examination, those were 14.98±4.77 and 17.05±4.35mm respectively. At follow-up, condylar translation were increased significantly comparing with those of before treatment(p<0.01). In 93.1% of patients, the condylar position of affected side at maximum mouth opening was behind the articular eminence before treatment but the percentage was decreased to 13.8% at follow-up(p<0.01). The pattern and range of mandibular movements at follow-up examination were similar to the typical normal movements. And in 16 cases showing lateral deviation of opening path, the deviation was directed to the affected and non-affected sides with the same frequency.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.635-641
• /
• 2006

RFID 시스템의 전자 태그, 리더 간의 무선 통신에서, 기존의 해쉬-락 관련 알고리즘은 스푸핑, 재전송, 트래픽 분석 및 위치 추적 등 보안상의 취약점이 존재한다. 본 논문에서는 개인정보 보호를 위한 기존의 해쉬-락 관련 알고리즘을 비교, 분석하였으며 이를 보완하기 위하여 실시간과 매 세션마다 리더로부터 수신한 난수를 이용하여 해쉬 함수를 생성하고 인증 프로토콜을 가지는 새로운 해쉬기반 보안 인증 알고리즘을 제안하였다. 제안한 알고리즘은 RFID 무선 인증 시스템에서 다양한 유용성을 제공할 수 있으며, 기존의 알고리즘에 비해 계산량을 절감할 수 있는 장점이 있다. 또한 추후 예상되는 주변의 수많은 태그중 필요한 태그만 선별하여 사용하며, 시간 기반으로 불필요 태그의 동작을 종료시켜 서버부담을 줄이는 방법이 될 것으로 기대된다.