• Journal of the Korean Geosynthetics Society
• /
• v.17 no.3
• /
• pp.47-55
• /
• 2018

Recently, increasing number of urban ground subsidence occurrences has been identified. This situation is mainly due to the increased number of underground cavities. This study is intended to develop the method that prevents ground settlement caused by deteriorated or damaged sewers, which are the main cause of land subsidence. To that end, GPR exploration was conducted using CCTV monitoring of deteriorated sewer at the location with high settlement potential. Through such CCTV monitoring and GPR investigation, abnormal ground behavior was monitored at the site where sewer was damaged, joint was cracked and soil was deposited. According to site investigation in this study, evaluation method using correlation analysis of CCTV monitoring and GPR investigation results is expected to prevent ground settlement attributable to damaged sewer.

• The Journal of Engineering Geology
• /
• v.34 no.2
• /
• pp.249-262
• /
• 2024

Retaining walls are widely used in the construction of underground structures. This study reviews the stability of the high-strength joint buried pile method at a site in Korea. [Consider giving details of the location.] The method is assessed by considering the amount of ground settlement, as calculated by finite element analysis and measured at the site. Comparison of the measured and numerical results confirmed the method's stability and field applicability. Settlement of 13.42~13.65 mm was calculated for seven cross-sections [The Abstract should be comprehensible without reference to the main text. The labels A-A' to G-G' should not be introduced here without explanation.] using numerical analysis, and the measured settlement reached a maximum of 2.00 mm. The observed differences and variations [Please state what differed/varied.] did not exceed the design expectations in any section. Instruments installed at the back of the excavation area were used to assess the conditions. An underground gradient meter recorded a cumulative horizontal displacement of between -0.40 and 0.60 mm, and an underground water meter recorded slight displacements of between -0.21 and 0.28 m compared with the initial measurements. A surface settlement meter observed very little movement, with a maximum of -2.00 mm compared with the initial measurement, thereby confirming the establishment of a stable state within the management criteria.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.3
• /
• pp.5-19
• /
• 2006

The secondary consolidation settlement of soft clay is generally very little compared to the total settlement and occurs very slowly during long-term period. However the secondary consolidation settlement is comparatively large amount in organic and heavily compressed clay and is a very important engineering factor. In order to reduce residual settlements in reclaimed soft ground, the preloading method is often used. In this study, in order to determine reasonable long-term settlements of large reclaimed site, laboratory incremental loading consolidation tests and surcharging consolidation tests are performed. Sampling was done at Incheon area of west coast and Gwangyang area of south coast in Korea. The characteristics of secondary consolidation have obtained through laboratory tests and analyzed systematically to predict long-term settlements. Additionally, the location data and laboratory test results are correlated by using GIS(geographic information system). The secondary consolidation settlement of the site was predicted based on D/B and the operation technique and estimation technique of space of GIS.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.146-159
• /
• 2019

This study focuses on the understanding of human subsistence and pottery use during ancient times on the Korean peninsula through lipid analysis of potsherds from several major prehistoric settlement sites. Ancient human subsistence has been one of the long-standing topics in Korean archaeology. However, since the high acidity of sediments does not allow long-term preservation of organic remains, we still lack some critical information related to the prehistoric diet. Pottery contains relatively well-preserved organic remains created during past cooking events. Though pottery is one of the most studied material cultures in Korean archaeology, almost no attention has been given to analyzing the pottery itself. This is a surprising omission and represents a serious gap in our understanding of prehistoric technology and subsistence. The analysis of ancient lipids extracted from the pottery matrix using GC-MS and isotope analysis can contribute to our understanding of the true nature of past subsistence strategies. Potsherd samples for the analyses in this study were collected from six prehistoric and early historic settlement sites located in the central part of the Korean peninsula. The results showed that subsistence strategies differed by both location and time period. For example, at Jungdo, an inland open-air Bronze Age settlement site in Chuncheon City, we were able to see the presence of terrestrial mammals. At Gahak-dong, Gwangmyeong City, marine resources were utilized, as the location of the site is not far from the coastline. At the early historic site of Guwol-dong, Incheon City, we were able to detect dairy products. The results of this study suggest that there was utilization of a wider range of resources among ancient dwellers in the central part of the Korean peninsula.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1721-1730
• /
• 2023

As awareness of the problem of global warming emerges around the world, the role of carbon sinks in settlement is increasingly emphasized to achieve carbon neutrality in urban areas. In order to manage carbon sinks in settlement, it is necessary to identify the current status of carbon sinks. Identifying the status of carbon sinks requires a lot of manpower and time and a corresponding budget. Therefore, in this study, a map predicting the location of trees was created using already established tree location information and Sentinel-2 satellite images targeting Seoul. To this end, after constructing a tree presence/absence dataset, structured data was generated using 16 types of vegetation indices information constructed from satellite images. After learning this by applying the Extreme Gradient Boosting (XGBoost) model, a tree prediction map was created. Afterward, the correlation between independent and dependent variables was investigated in model learning using the Shapely value of Shapley Additive exPlanations(SHAP). A comparative analysis was performed between maps produced for local parts of Seoul and sub-categorized land cover maps. In the case of the tree prediction model produced in this study, it was confirmed that even hard-to-detect street trees around the main street were predicted as trees.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.3
• /
• pp.83-91
• /
• 2020

The purpose of this study is to examine the process of formation of modern gardens. Based on the analysis of the process of formation and transformation of the Jemulpo in Incheon and the details of the modern garden construction. The results are as follows; First, the formation of the Incheon Residence Site began in 1876 with the signing of the Joseon-Japan Treaty. Jemulpo used to be a desolate fishing village in the past, but after its opening in 1881, the Japanese settlement, Chinese settlement, and the general foreign settlement were formed. After that, Japan reclaimed the southern mudflats and expanded the theire settlement area, and advanced to the Joseon area(currently Sinheung-dong). In Japanese colonial era, modern Japanese urban landscapes were transplanted into the settlement area, centering on the Japanese modern gardens were distributed in the area around the center of the settlement area. Second, after examining the process of creating the garden for the Rikidake villa, Japanese Rikidake purchased a site for an orchard in Uri-tang, who was a major landowner in Incheon, to create the garden. At the time of Rikidake's residence, the garden was very large, measuring about 3,000 pyeong, and after liberation, it was acquired by Incheon City and used as Yulmok Children's Library. It was known as a rich village at the time of the opening of the port, and a garden was located at the highest point in Yulmok-dong, making it easy to see the Incheon Port area. Also, a spot located about 300 meters away from Rikidake's rice mill may have affected the location selection. Third, today's Rikidake villa has a Japanese-style house on a trapezoidal site, with a garden of about 990 square meters on the south side. Currently, it is possible to enter from the south and from Yulmok Children's Park in the north, but in the past, the main direction of the house was to view the Incheon Port, settlement area, and the Rikidake Rice Mill, so the house was located in front of the garden. The garden is a multi-faceted style with stone lanterns, tombstones, garden stones, and trees placed on each side, and is surrounded by arboreal plants such as attention, strobe pine, and maple trees, as well as royal azaleas. The view from the inside of the house was secured through shrub-oriented vegetation around the house.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.4 s.21
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.135-145
• /
• 1999

This thesis is to investigate the sliding behavior of cantilever retaining wall by using the commercially available program of FLAC to simulate its behavior numerically. Cantilever retaining walls with flat base, sloped base and base with shear key, uniform surcharges being applied on the surface of backfill, were investigated to figure out appropriate location of shear key beneath the base of wall and, thus, its applicability to field condition was assessed by comparing the analyzed results to each other. On the other hand, previously performed centrifuge model test results (Eum, 1996) were analyzed numerically with FLAC to compare test results with respect to characteristics of load-settlement of surcharges and load-lateral movement of wall. Based on the failure mechanism observed during centrifuge tests, limit equilibrium method of finding the ultimate load inducing the sliding failure of wall was used to compare with values of the ultimate load obtained from conventional method of limit equilibrium method. Therefore, appropriate location of shear key was determined to mobilize the maximum resistance against sliding failure of wall.

• Korean Institute of Interior Design Journal
• /
• v.14 no.4 s.51
• /
• pp.79-86
• /
• 2005

According to the new multi-media appeared as a result of rapid growth of the information and science technique, the school library must be changed to the integration of the teach-study media resource from the existing print media. It means that the school library has to play a role of the study center with a different media from the existing teaching material, teaching instrument, facility and opportunity. The Information education must be conducted in the way of an integrated education course and able to do both information transaction and problem settlement. The education facility to solve this problem is the school library. Therefore, the school library becomes important more and more. It means that the school library is the center of entire study and education material for the teacher and student is focused on it. It is urgent to make the standard of the school library In order to cope with the new education and information environments. And especially it is very important to make a plan about the location and scale of the school library to improve the quality of the children's studying activity. The location of the school library is decided under consideration of the relationship with other room of school house and the proper scale of it is between 2.5units and 7.0units of classroom based on the number of class.

• Smart Structures and Systems
• /
• v.32 no.4
• /
• pp.207-218
• /
• 2023

Real-time monitoring of the behavior of reinforced soil retaining wall (RSW) is required for safety checks. In this study, a targetless displacement measurement technology (TDMT) consisting of an image registration module and a displacement calculation module was proposed to monitor the behavior of RSW, in which facing displacement and settlement typically occur. Laboratory and field experiments were conducted to compare the measuring performance of natural target (NT) with the performance of artificial target (AT). Feature count- and location-based performance metrics and displacement calculation performance were analyzed to determine their correlations. The results of laboratory and field experiments showed that the feature location-based performance metric was more relevant to the displacement calculation performance than the feature count-based performance metric. The mean relative errors of the TDMT were less than 1.69 % and 5.50 % for the laboratory and field experiments, respectively. The proposed TDMT can accurately monitor the behavior of RSW for real-time safety checks.