• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.306-314
• /
• 2012

This paper proposes a new system to maximize efficiency of Air Base Protection Operations through the development of location identification software. The Wibro-based location identification system for Air Base Protection Force offers Blue Ground Force digitalized character message which is not exposed to enemy. Also, it is possible to automatically provide the location of Blue Ground Force to Air Base Ground Operations Center. The test result proves that this system is very helpful when Air Base Protection Force executes Air Base Protection Operations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.499-505
• /
• 2003

In the design of mobile wireless communication system, base station location is one of the most important parameters. Designing base station location, the cost must be minimized by combining various, complex parameters. We can solve this problem by combining optimization algorithm, such as Simulated Annealing, Tabu Search, Genetic Algorithm, Random Walk Algorithm that have been used extensively fur global optimization. This paper shows the 4 kinds of algorithm to be applied to the optimization of base station location for communication system and then compares, analyzes the results and shows optimization process of algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.61-66
• /
• 2005

Location Positioning is a major technology for ubiquitous computing. Recently the research on Location Positioning using UWB is on going. In order to construct an in-door location network, synchronization of base stations is very important. NTP is Popularly used as clock synchronization protocol ranging from LAN to WAN. Also Master-Slave scheme is the simplest method to synchronize in-door network. We compare and analyze NTP and Master-Slave schemes according to the statistical channel model for indoor multipath propagation environment. In this paper, error ranges are calculated at various circumstances that in-door network expands from one primary base station into several base stations. We compared the correctness of NTP and Master-Slave synchronization methods. NTP is more reasonable synchronization protocol in in-door environment.

• The KIPS Transactions:PartC
• /
• v.14C no.2
• /
• pp.179-184
• /
• 2007

The problem of selecting base station location in the design of mobile communication system has been basically regarded as a problem of assigning maximum users in the cell to the minimum base stations while maintaining minimum SIR. and it is NP hard. The objective function of warehouse location problem, which has been used by many researchers, is not proper function in the base station location problem in CDMA mobile communication, The optimal and approximate solutions have been presented by using proposed object function and algorithms of exact solution, and the simulation results have been assessed and analyzed. The optimal and approximate solutions are found by using mixed integer programming instead of meta-heuristic search methods.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.1
• /
• pp.87-93
• /
• 2004

In the design of mobile wireless communication network, BSC(Base Station Location), BSC(Base Station Controller) and MSC(Mobile Switching Center) are the most important parameters. Designing base station location, the cost must be minimized by combining various, complex parameters. We can solve this Problem by combining optimization algorithm, such as Simulated Annealing, Tabu Search, Genetic Algorithm, Random Walk Algorithm that have been used extensively for global optimization. This paper shows the 4 kinds of algorithm to be applied to the optimization of base station location for communication system and then compares, analyzes the results and shows optimization process of algorithm.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.183-192
• /
• 2019

In fingerprint-based wireless positioning, it is necessary to establish a DB of the unmeasured area. To this end, a method of estimating the position of a base station based on a signal propagation model, and a method of estimating the information of the received signal in the unmeasured area based on the estimated position of the base station have been investigating. The purpose of this paper is to estimate the position of the base station using the measured information and to analyze the performance of the positioning. Vehicles equipped with a GPS receiver and signal measuring equipment travel the service area and acquire location-based Reference Signal Received Power (RSRP) measurements. We propose a method of estimating the position of the base station using the measured information. And the performance of the proposed method is analyzed on a simulation basis. The simulation results confirm that the accuracy of the positioning is affected by the measured area and the Dilution of Precision (DOP), the accuracy of the position information obtained by the GPS receiver, and the errors of the signal included in the RSRP. Based on the results of this paper, we can expect that the position of the base station can be estimated and the DB of the unmeasured area can be constructed based on the estimated position of the base stations and the signal propagation model.

• Journal of the military operations research society of Korea
• /
• v.22 no.1
• /
• pp.30-42
• /
• 1996

This study deals with an optimal firecar location and allocation models under uncertain enemy attack at the airforce base. It allocates just one firecar on the runaway and the other firecars on the headquarter of firecar company in usual situation. It is possible for several facilities at the airforce base to be attacked simultaneously by missiles enemy air attacker, other things under uncertain enemy attack. We formulate two stochastic LP location-allocation models to deal with uncertainty. One model is to locate all firecars on one site like present situation. We generate a new firecar location with a weighted average method. We call this model "centralized allocation model". The other model is to distribute firecars on several possible sites. We call this model "distributed allcoation model". Finally, we compare two models with computer experimentations on 8 airforce bases.on 8 airforce bases.

• Journal of Industrial Technology
• /
• v.9
• /
• pp.67-77
• /
• 1989

This study is concerned with the accuracy, the pattern of error with which subjects can interpolate the location of a pointer or a target between two graduation markers with various size on CRT display. Stimuli were graphic images on CRT with a linear, end-marked, ungraduated scales having a target for t base-line sizes. The location of a target is estimated in units over the range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less 2 units, modal error was 1, and most error(;99.6%) was within 10. Subjects had a more tendency to overestimate than to underestimate at the left-part of base-line in all siges, and an opposite tendency at the right-part. A proper size to minimize the interpolation error exists such that size 500. It is suggested that interpolation of fifths and even tenths will give a reguired accuracy for certain situations, and relative location and base-line size has a relevant attribute to interpolate.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.3
• /
• pp.207-214
• /
• 2021

A new positioning technique for positioning of LTE base stations is proposed. The positioning information of the base station is absolutely necessary for model-based wireless positioning, and is required in some of the various merhodologies for estimating signals in an uncorrected area when construnting a database for fingerprinting-based positioning. Using the acquired location-based Reference Signal Received Power (RSRP) information to estimate the location of the base station, it is impossible with the existing trilateration methods. Therefore, in this paper, a method using reference particles is proposed. Particles are randomly generated in the application area, and signal propagation modeling is performed assuming that a base station is located in each particle. Based on this, the errors of measurements are calculated. The particle group with the minimum measurement errors is selected, the position of the base station is estimated through weighted summation, and the signal propagation model of the corresponding base station is built at the same time. The performance of the proposed technology is verified using data acquired in Seocho-dong, Seoul.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.250-254
• /
• 2013

Faster and cheaper transportation of the war supplies to the frontlines is essential for winning a war. This paper proposes a method to select the optimal location of the strategic military base, e.g., the Quartermaster Corps, that minimally connects three frontlines using the optimization technique. The results are also compared to the Steiner Tree theoty.