• Korean Institute of Interior Design Journal
• /
• v.22 no.3
• /
• pp.22-32
• /
• 2013

The quality of apartment houses has been gradually upgraded. However the changes in demographic composition of residents such as seniors, disabled persons, and etc. have not been considered in the process of planning. If apartment houses are designed on the base of the concept of universal design, their residents could live as long as they want to live in. This study evaluates the Korean standard-sized apartment housing units and the common spaces of those apartment buildings, and it's outdoor environments from the perspective of universal design. The observation and measuring was conducted with the questionnaire survey with 100 residents living in those housing units. 60 items were designed for evaluating them in relation to the principles of universal design. The results are as follows : 1) In general, the principles of universal design were relatively applied to the apartment houses. However their application needs to be broadened. 2) The number of parking lots needs to be increased and the width of individual parking lot to be increased. Also, the location of gazebo and senior center needs to be placed in easily accessible areas. 3) The shape, color, finishes of the ramp and the entrance area of the apartment building and housing unit should be made more homelike. Also, the entrance area of apartment building and housing unit needs to be made large enough for residents themselves and meeting with neighbors. 4) Among all of the rooms in a housing unit, bathroom should be improved immediately. Also, the width of doors should be at least 80cm wide and the floor should be made even.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.520-527
• /
• 1988

Liquid ejectors are widely used as marine pumps, inducer stage for the boiler feed water pump, boiler recirculating pump, cooling water recirculating pump in boiling water type nuclear reactor and a deep well pump, because of their high working confidence and simplicity. Furthermore, it requires only a modest net positive suction head for cavitation-free operation and it can be installed in remote location from mechanical power source. It is not easy to presume the friction losses, because it is complicately affected by area ratio, flowrate ratio, nozzle spacing, throat length, shape of liquid ejector and so on. Therefore, the optimization of liquid ejector design is still dependent, to a large extent, on the experimental results and empirical procedures. On the design of the liquid ejector, the area ratio and the nondimensional throat length are the most important design factors among the mentioned above. In this experiment, the effects of the area ratio and the nondimensional throat length to ejector efficiency are carried out systematically by the combination of 4 kinds of motive nozzle and 2 kinds of throat length. In this paper, the present experimental results are compared with the calculated ones by the previous computer aided design program based on one dimensional flow equation. And also, an empirical equation for the working limit of liquid ejector is reported.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.1
• /
• pp.80-91
• /
• 2004

This landscape design proposal was presented to a design competition for the master plan of Ttukseom Sup, which was held by the City of Seoul in March, 2003. The site is located at 1-685, Sungsu-dong, Sung-dong-gu and has an area of 1,156,498$m^2$. The judging criteria for landscape design set by the City of Seoul could be articulated as follows: first, the proposal should be nature-oriented with groves that can be accessed easily by citizens; second, the proposal should not be facilities-oriented but plants-oriented groves that utilize existing plants; third, the proposal should present its own identity reflecting its historical aspects and geographical location. This proposal has been approached first by redefining the meanings of the old Korean village groves and second, by proposing new cultural infrastructures with the groves corresponding to recent cultural trends.

• Korean Institute of Interior Design Journal
• /
• no.3
• /
• pp.64-70
• /
• 1994

The objective of this study is to provide recommendations for the interir design of motor showroom as a sales policy. ten cases of motor showrooms were selected from already observed 50 showrooms in Seoul area. findings revealed that the car industries of Korea should meet the strong needs of differentiated sales policy, and the showroom design was an important factor which influenced client's pruchasing power. From these findings and analyses, this study suggests that each brand has to represent the typical total image to appeal to the consumer strongly . Additionally each showroom should be flexible in modification to meet the diverse conditions such as the location, required function and the trend of consumers. In conclusion , researchers provided 6 types of recommendations in terms of floor plan and interior elements such as circulation path, moduled furniture and objects color and lighting variation . Hopely, this research provides more functional and comfortable environment of automobile showrooms for consumers and companies.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.121-138
• /
• 2004

The design of soccer studs is important for providing friction on a variety of surfaces. We hypothesized that a certain type of soccer studs could improve performance due to high rotational friction. Thus, this study was conducted to determine the relationship between the frictional characteristics and different soccer stud design. Twelve recreational soccer players were recruited. Rotational friction data from the force plate was collected for all subjects during normal walking with 180 degree rotation. Walking speed was controlled at 1.2m/s (${\pm}\;0.1\;m/s$) with timing lights on infilled artificial turf. Three different types of soccer studs and one running shoe were tested. Repeated measures ANOVA was used to determine significance. Significant differences were found in rotational friction with four different shoes. Trx and World studs tended to have greater maximum rotational friction than the running shoe (Nova) and traditional soccer shoe(Copa Mondial). The results were as follow : world(25.95Nm) > trx(25.74Nm) > copa(22.50Nm) > nova(16.36Nm). The difference may be due to the number, location, size, and shape of studs. We concluded that stud design influences rotational friction between the shoe and surface during movement. Based on studs design and contact area, Trx with blade type studs are recommended since it showed high rotational friction for performance as well as enough contact area for stability. However, differences due to the mechanical properties of soccer studs are still being investigated.

• Journal of the Korean Institute of Rural Architecture
• /
• v.10 no.3
• /
• pp.9-18
• /
• 2008

The study was intended to suggest the design alternatives of rural village community center based on the design directions which were derived from the previous research, and to evaluate the alternatives by rural residents. The previous research was carried out to grasp the conditions and user's needs of rural village community center. The subjects were 100 residents who lived in rural area in Chonlabukdo. The interview was carried out using a questionnaire with model and isometrics of two alternatives, which showed floor plan and building shape. The subjects evaluated positively both of two alternatives, but slightly more preferred alternative | because of a spacious diningroom and an indoor toilet. The size of a livingroom and entrance, indoor toilet space/location, storage space and deck were significant elements in two alternatives according to t-test. They responded that both of indoor and outdoor toilet should be planned in rural village center. Also, each toilet and room for man and woman should be separated. Entrance space should be enough to take on/off their shoes in a sitting position and deck space was planned to intermediate between indoor and outdoor space.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.4
• /
• pp.671-683
• /
• 2011

The technical development of transportation and communication increases freedom of location choice. This higher freedom allows to company can pursues bigger profit than before. Company's separated spatial configurations tend to go to most optimal location, so some places showed unexpected agglomeration. This study conducted to prove "dispersed concentration" for specific example, pharmaceutical enterprises, in real business world. As a result, separation of spatial configuration clearly observed as product output goes bigger and R&D's depth goes deeper. And spatial concentration of each function was found. Most headquarters are located in Seoul, R&D centers make agglomeration at some spaces. Plants' location concentrated until 1990s, but, in 2000s, plants expand out of metropolitan area.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.123-128
• /
• 2007

SPWPM traditional software development is surveyed and essential problems are investigated on the basis of system wireless link considerations. This paper presents the current state software planning tools for wireless LAN link optimization. The software directory is based on combination of MatLab and MapInfo software and measurement which gives the best grouping parameters to build up the software development. Among the requirements assumed, the WLAN site selections must be Line-of-sight (LOS) or near line of sight (NLOS) field strength prediction for either point to point or point to multi points. The results obtainable the out put of the program include two-dimensional (2D) and three dimensional (3D) plots for creating the link; design parameters through GUI representing the height and location for each antenna is depending on K-factor of the area and transmit antenna location.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.158-163
• /
• 2012

This study is concerned with the estimation of wind speeds for return period in cellularized district of Busan by the recent meteorological data. Recently standard of the wind load in Busan area is determined by using meteorological wind speed data which is observed on Automated Synoptic Observing System(ASOS) only. Applying the existing basic wind speed that is 40m/s to the construction design of Busan area is inefficient. Because the wind speeds of Busan area show different amounts depend on the location of cellularized district. This research analyze the observed data of wind speeds of cellularized district in Busan based on Automate Weather System(AWA). In addition that we compute regional wind speeds for return period by using Gumbel distribution and study and compare with the existing basic wind speeds after evaluating appropriateness by Hazen's plot method.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.4
• /
• pp.1-9
• /
• 2017

We propose an efficient method to determine the position of blueprint by using a vector field with optimized MLS(Moving Least Squares). Typically, a professional architectural design office takes a long time to work as well as a high processing cost because the designer manually determines the location to place the buildings in a specific area. In order to solve this inefficient problem, we propose a method to automatically determine the location of the blueprint based on the optimized MLS method. In the proposed framework, the designer selects the desired region in the actual city data and calculates the flow of the vector based on the region. Use the optimized MLS method to extract the vector field and determine the amount of rotation of the drawing based on this field. The location of the blueprint determined by the proposed method is very similar to the flow seen when the actual building is located. As a result, the efficiency of the overall architectural design process is further improved by reducing the designer's inefficient workforce.