• 설비공학논문집
• /
• 제21권9호
• /
• pp.483-495
• /
• 2009

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damange, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction stream line-inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes operation of experience and numerical analysis composed similar condition with real high pressure feedwater heater. This study applied squared, curved and new type impingement baffle plates to feedwater heater same as previous study. In addition, it shows difference of pressure distribution and value between single phase and two phase based on experience and numerical analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.972-974
• /
• 2005

The present work deals with the theoretical study of the effects of copper vapours resulting from the erosion of the electrodes on the properties of a SF6 arc in a Laval nozzle. Computations have been done for a DC arc of 1000A with upstream gas pressure of 3.75MPa. The arc plasma is assumed to be in local thermodynamic equilibrium(LTE). The sheath and non-equilibrium region around the electrodes are not considered in this model. However, its effects on the energy flux into the electrodes are estimated from some experimental and theoretical data. The turbulence effects are calculated using the Prandtl mixing length model. A conservation equation for the copper vapour concentration is solved together with the governing equations for mass, momentum and energy of the gas mixture. Comparisons were made between the results with and without electrodes erosion. It has been found that the presence of copper vapours cools down the arc temperature due to the combined effects of increased radiation and increased electrical conductivity. The copper vapour distribution is very sensitive to the turbulent parameter. The erosion of upstream electrode(cathode) has larger effects on the arc compared to the downstream electrode(anode) as the copper vapour eroded from the anode cannot diffuse against the high-speed axial flow.

• 대한조선학회논문집
• /
• 제53권2호
• /
• pp.162-169
• /
• 2016

A new concept of membrane type LNG CCS was proposed. Also, its static behavior was numerically analyzed considering the interaction between primary and secondary barrier together with securing device. Hull deflection was taken into account as an external load, together with temperature distribution across the barriers. The suggested numerical model considers both sliding and contact between the two mating surfaces of both the primary and secondary barrier, and anisotropic material behavior of plywood, R-PUF was also taken into account. Furthermore, detailed local strength was evaluated for the securing device, which is arranged between two barriers to hold the primary barrier. It was confirmed through the numerical analysis that the new concept of membrane type CCS was structurally safe under static loading condition and securing concept was structurally reliable.

• Journal of Animal Science and Technology
• /
• 제61권1호
• /
• pp.47-53
• /
• 2019

This study was performed to evaluate the microbial and temperature changes of boxed beef during transport and distribution under vacuum and modified atmosphere packaging (MAP), and to compare between excision and swab sampling for 15 days. The top round and striploin (quality grade 1) from Hanwoo steers at 2 days post-slaughter were obtained from a local meat processing plants and chilled at $4{\pm}2^{\circ}C$ in a cold room. The boxes were transported under refrigeration ($4{\pm}2^{\circ}C$) to the laboratory within half an hour. Vacuum and MAP packs were subsequently taken out from cool boxes, and microbiological examinations were carried out at 0, 6, 12, and 24 h of storage time. MAP was more effective than vacuum packaging for the inhibition of total aerobic, lactic acid bacteria and Pseudomonas (p < 0.05). Microbial loads of swab methods were slightly lower than those of excision ones (p < 0.05). The results of this study could be utilized by meat consumers in future studies as well as by manufacturers to determine the ideal storage conditions for cool boxed meat, thus ensuring reduced economic losses due to spoilage.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.441-447
• /
• 2022

Silicon-based materials are one of the most promising anode active materials in lithium-ion battery. A carbon layer decorated on the surface of silicon particles efficiently suppresses the large volume expansion of silicon and improves electrical conductivity. Carbon coating through chemical vapor deposition (CVD) is one of the most effective strategies to synthesize carbon- coated silicon materials suitable for mass production. Herein, we synthesized carbon coated SiOx via pilot scale CVD reactor (P-SiO_x@C) and carbon coated SiO_x via industrial scale CVD reactor (I-SiO_x@C) to identify physical characteristic changes according to the CVD capacity. Reduced size silicon domains and local non-uniform carbon coating layer were detected in I-SiO_x@C due to non-uniform temperature distribution in the industrial scale CVD reactor with large capacity, resulting in increased surface area due to severe electrolyte consumption.

• 한국해양학회지:바다
• /
• 제18권3호
• /
• pp.111-121
• /
• 2013

지역규모의 정확한 일기예보와 해양생태계 변화 이해에 있어서 수온 예측은 매우 중요하다. 황해는 조류가 매우 빠르고 탁도가 높다. 이러한 해역에서는 수치 모델의 수직 혼합 기법 및 해수의 탁도에 따른 수형(water type)이 수온 구조 결정에 많은 영향을 미친다. 수직 혼합 기법 변화와 탁도의 변화에 따른 황해 수온 모사의 민감도를 알아보기 위해 3차원 해양 순환 모델인 Regional Ocean Modeling System (ROMS)을 사용하여 수치 실험을 수행하였다. 수직 혼합 기법은 해양 순환 모델에서 많이 사용되는 Mellor-Yamada level 2.5 closure(M-Y)와 K-Profile parameterization (KPP)을 사용하고, 탁도는 Jerlov의 분류에 따른 수형 1, 3, 5를 사용하여 수치 실험을 수행하고 그 결과를 국립수산과학원에서 제공하는 정선 해양 관측 자료와 비교, 분석하였다. M-Y 기법은 수직적 혼합을 상대적으로 강하게 모의하였으며 그 결과로 저층수온이 높게 형성되었다. 높은 저층 수온은 탁도를 높게 설정하면 완화되지만 표층 수온이 높아지는 단점이 있다. KPP 기법은 M-Y 기법보다는 수직 혼합을 약하게 모의하고 이 약한 수직 혼합 때문에 황해 연안을 따라 형성되는 조석전선을 잘 재현하지 못하였으나, 저층 수온은 관측 수온에 더 가깝게 재현하였다. 결과적으로 황해 3차원 해양순환 모델실험에서 M-Y 기법은 수직 혼합이 잘 되어 표층과 저층의 수온 차이가 작게 나타나고, KPP 기법은 이와 반대로 모의하였다. 탁도의 영향을 표현하는 Jerlov 수형은 높을수록 일사량이 낮은 수심까지만 투과되어 성층을 잘 표현하였고, 낮을수록 깊은 수심까지 일사량이 투과되어 표층과 저층의 수온차를 작게 모의하였다.

• 한국토양비료학회지
• /
• 제17권2호
• /
• pp.108-113
• /
• 1984

수도(水稻)의 생육기간중(生育期間中) 군락내(群落內) 미세기상특성(微細氣象特性)의 변화(變化)를 보기 위하여 1982년도(年度)에는 서광벼를 $3.3m^2$당(當) 50, 80, 110주(株)로 재식밀도(栽植密度)를 달리하였고, 1983년도(年度)에는 서광벼와 추청벼를 $3.3m^2$당(當) 80주(株)로 재배(栽培)하였다. 본(本) 시험(試驗)에서는 군락내(群落內)의 기온(氣溫), 수온(水溫) 및 지온(地溫)의 수직분포(垂直分布)와 일사량(日射量) 및 엽면적지수(葉面積指數)와의 관계(關係)를 중심(中心)으로 검토분석(檢討分析)하였으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 생육초기(生育初期)의 수도(水稻)의 군락내기온(群落內氣溫)은 이앙후(移秧後) 30일(日)에는 밀식구(密植區)(110주(株)/$3.3cm^2$)가 소식구(疎植區)(50주(株)/$3.3m^2$)보다 $1{\sim}1.5^{\circ}C$정도 높았고, 이앙후(移秧後) 60일(日)에는 역전되는 경향을 보였으며 이앙후(移秧後) 90일(日)에는 밀식구군락(密植區群落) 기온(氣溫)이 소식구(疎植區)보다 $3{\sim}4^{\circ}C$ 높았다. 한편 생육초기(生育初期)에는 수면(水面)에 가까운 10cm층위(層位)의 기온(氣溫)이 30cm층위(層位)보다 높았으나 이앙후(移秧後) 60일이후(日以後)는 10cm층위(層位)가 30cm층위(層位)보다 낮아졌다. 2. 군락내(群落內) 최고온도(最高溫度) 출현시각(出現時刻)은 생육초기(生育初期)에는 대기기온(大氣氣溫)과 비슷한 시각(時刻)인 연후(年後) 2~3시경(時)이었으나 군락(群落)이 번무(繁茂)함에 따라 일사강도(日射强度)가 가장 높은 정오(正午)에 접근(接近)하였다. 3. 군락내(群落內) 수온(水溫)이 군락내기온(群落內氣溫)보나 높은 시기(時期)는 집면적지수(集面積指數)가 4.6(추청벼)내지 5.2(서광벼)이하(以下)이고, 투광율(透光率)이 40% 이상(以上)인 때이었다. 4. 군락내광감소계수(群落內光減小係數)는 군락상부(群落上部)가 0.3~0.5, 하부(部)가 0.1내외(內外)이었다. 5. 시각별(時刻別) Albedo는 아침과 저녁에는 0.4 이상(以上)이었으나, 정오(正午)에는 0.25내외(內外)이었으며 태양고도(太陽高度)가 낮을 때는 잎이 만곡형(彎曲型)인 추청벼구(區)에서, 높을 때는 직립형(直立型)인 서광벼구(區)에서 낮았다.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3217-3228
• /
• 2021

Flow blockage of the fuel assembly in the lead-based fast reactor (LFR) may produce critical local spots, which will result in cladding failure and threaten reactor safety. In this study, the flow blockage characteristics were analyzed with the sub-channel analysis method, and the circumferentially-varied method was employed for considering the non-uniform distribution of circumferential temperature. The developed sub-channel analysis code SACOS-PB was validated by a heat transfer experiment in a blocked 19-rod bundle cooled by lead-bismuth eutectic. The deviations between the predicted coolant temperature and experimental values are within ±5%, including small and large flow blockage scenarios. And the temperature distributions of the fuel rod could be better simulated by the circumferentially-varied method for the small blockage scenario. Based on the validated code, the analysis of blockage characteristics was conducted. It could be seen from the temperature and flow distributions that a large blockage accident is more destructive compared with a small one. The sensitivity analysis shows that the closer the blockage location is to the exit, the more dangerous the accident is. Similarly, a larger blockage length will lead to a more serious case. And a higher exit temperature will be generated resulting from a higher peak coolant temperature of the blocked region. This work could provide a reference for the future design and development of the LFR.

• 대기
• /
• 제26권4호
• /
• pp.495-508
• /
• 2016

In order to determine the prediction possibility of heavy rainfall, a variety of analyses was conducted by using three-dimensional data obtained from Korea Local Analysis and Prediction System (KLAPS) re-analysis data. Strong moisture convergence occurring around the time of the heavy rainfall is consistent with the results of previous studies on such continuous production. Heavy rainfall occurred in the cloud system with a thick convective clouds. The moisture convergence, temperature and potential temperature advection showed increase into the heavy rainfall occurrence area. The distribution of integrated liquid water content tended to decrease as rainfall increased and was characterized by accelerated convective instability along with increased buoyant energy. In addition, changes were noted in the various characteristics of instability indices such as K-index (KI), Showalter Stability Index (SSI), and lifted index (LI). The meteorological variables used in the analysis showed clear increases or decreases according to the changes in rainfall amount. These rapid changes as well as the meteorological variables changes are attributed to the surrounding and meteorological conditions. Thus, we verified that heavy rainfall can be predicted according to such increase, decrease, or changes. This study focused on quantitative values and change characteristics of diagnostic variables calculated by using numerical models rather than by focusing on synoptic analysis at the time of the heavy rainfall occurrence, thereby utilizing them as prognostic variables in the study of the predictability of heavy rainfall. These results can contribute to the identification of production and development mechanisms of heavy rainfall and can be used in applied research for prediction of such precipitation. In the analysis of various case studies of heavy rainfall in the future, our study result can be utilized to show the development of the prediction of severe weather.

• Ocean and Polar Research
• /
• 제33권4호
• /
• pp.447-455
• /
• 2011

Using results from an earth system model, the distribution of partial pressure of $CO_2$ ($pCO_2$) in surface seawater over the East China Sea is investigated. In this area $pCO_2$ shows minimum along the edge of the continental break along the path of the Taiwan-Tsushima Current System. Apparently modelled chlorophyll is also great along the current but the maximum of the chlorophyll and the minimum of $pCO_2$ do not coincide suggesting that the primary production is not the main cause of the $pCO_2$ minimum. As we move toward the Yellow Sea from the Kuroshio area the temperature decreases so that the $pCO_2$ becomes smaller. If we move further toward the Yellow Sea beyond the Taiwan-Tsushima Current System, alkalinity starts to drop substantially to intensify $pCO_2$ while overcoming the effect of decreasing temperature and salinity. Thus $pCO_2$ minimum occurs along the Taiwan-Tsushima Current System. Of course, the primary production lower $pCO_2$ during spring when it is high but the effect is local. Near the Yangtze river mouth and northeastern corner of the Yellow Sea the fresh water input is large enough and dissolved inorganic carbon (DIC) becomes low enough so that $pCO_2$ becomes lower again.