• International Journal of Fluid Machinery and Systems
• /
• 제8권4호
• /
• pp.240-253
• /
• 2015

The objective of this paper is to evaluate the applicability of mass transfer cavitation models and determine appropriate numerical parameters for cavitating flow simulations. CFD simulations were performed for a NACA66 hydrofoil at cavitation numbers of 1.49 and 1.00, corresponding to steady sheet and unsteady sheet/cloud cavitating regimes using the Kubota and Merkle cavitation models. The Merkle model was implemented into CFX by User Fortran code. The Merkle cavitation model is found to give some improvements for cavitating flow simulation results for these cases. Turbulence modeling is also found to have an important contribution to the prediction quality of the simulations. The relationship between the turbulence viscosity modification, in order to take into account the local compressibility at the vapor/liquid interfaces, and the predicted numerical results is clarified. The limitations of current cavitating flow simulation techniques are discussed throughout the paper.

• 의정연구
• /
• 제27권2호
• /
• pp.111-143
• /
• 2021

지방자치법 전부개정안이 통과되면서 지방행정 환경의 변화가 예고되고 있다. 특히 지방의회의 역량을 강화하고 책임성 확보를 위한 전문성 강화에 주목하여 현 지방의회의 예산심의과정에 있어서 권한 분석이 필요하다. 의회의 예산권한은 지갑의 힘(power of the purse), 예산통제권한 등 다양한 용어로 표현되며 의회의 예산심의과정에서의 통제와 견제 역할에 주목하고 있다. 본 연구는 재정지출 결정요인인 정치행정적, 사회경제적 변수가 지방의회의 예산권한에 영향을 미치는 요인을 분석하고자 했다. 의회의 예산권한을 예산수정률과 본회의 예산안 처리일수로 설정하고 다양한 변수들이 예산권한에 미치는 영향을 확인하였다. 그 결과 지방의회는 예산수정에 소극적이며, 견제와 통제 역할이 미흡함을 확인했다.

• 소성∙가공
• /
• 제14권1호
• /
• pp.21-28
• /
• 2005

This paper is concerned with the quantitative effect of design parameters on a stamped part of the auto-body. The considered parameters in this paper are the blank holding force, the draw-bead force, the blank size which greatly affect the metal flow during stamping. The indicators of formability selected in this paper are failures such as tearing, wrinkling and the amount of springback. The stamping process of the front side inner member is simulated using the finite element analysis changing the design parameters. The numerical results demonstrate that the blank holding force cannot control the local metal flow during forming although it controls the overall metal flow. The modification of the initial blank size considering the punch opening line ensures the local wrinkling and reduces the amount of springback after forming. The restraining force of draw-bead controls the metal flow in the local area and reduces the amount of excess metal. It is noted that the parametric study of design parameters such as blank holding force, the blank size and the draw-bead are very important in the process design of the complicated member.

• 한국어교육
• /
• 제23권1호
• /
• pp.257-282
• /
• 2012

Sakhalin, Russia is a very specific area for Korean language education. The imposed separation and isolation in this region means the language in Sakhalin is mixed with South Korean, North Korean, Gyeongsang Province dialect, Japanese, and Russian. Scrutiny of the use of the actual language of Sakhalin Koreans is needed, and it is required in supporting Korean language education. In this study, I will cover: 1. Approach should differ depending on the situation of Korean, foreigners, Korean Language School(Hangeul Hakgyo) and Korean classes in local Schools. 2. Tailor-made textbooks for Sakhalin are required. 3. Korean textbooks to match local circumstances are needed. There should be a basic writing text written by a local Korean department professor and supervision or modification, supplements from Korean language education researchers in Korea. 4. Enlarged Korean training programs are needed. Furthermore, if Korean and Russian university students are to study in Korea, there should be programs offering a dual degree among other things. 5. Methodical, overall examination of overseas Korean regions like Sakhalin is necessary. Also in the case of far east Russia, connectivity between Vladivostok, Khabarovsk and Sakhalin needs to be strengthened.

• International Journal of Computer Science & Network Security
• /
• 제23권2호
• /
• pp.55-64
• /
• 2023

The travelling salesman problem (TSP) is an important combinatorial optimization problem that is used in several engineering science branches and has drawn interest to several researchers and scientists. In this problem, a salesman from an arbitrary node, called the warehouse, starts moving and returns to the warehouse after visiting n clients, given that each client is visited only once. The objective in this problem is to find the route with the least cost to the salesman. In this study, a meta-based ant colony system algorithm (ACSA) is suggested to find solution to the TSP that does not use local pheromone update. This algorithm uses the global pheromone update and new heuristic information. Further, pheromone evaporation coefficients are used in search space of the problem as diversification. This modification allows the algorithm to escape local optimization points as much as possible. In addition, 3-opt local search is used as an intensification mechanism for more quality. The effectiveness of the suggested algorithm is assessed on a several standard problem instances. The results show the power of the suggested algorithm which could find quality solutions with a small gap, between obtained solution and optimal solution, of 1%. Additionally, the results in contrast with other algorithms show the appropriate quality of competitiveness of our proposed ACSA.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제33권4호
• /
• pp.418-426
• /
• 2006

본 논문에서는 수술 도중에 심장내부로 삽입한 초음파 탐침을 통해 획득된 초음파 심장영상에서 강인하게 심장 영역을 고속 자동 분할하는 방법을 제안한다 제안한 방법은 심장 초기 경계 추출, 신뢰도 경쟁을 통한 전체 경계 검출, 회전 국부 방사선 기법을 이용한 국부 경계 보완으로 세 단계로 구성된다. 첫째, 초음파 탐침의 중심에서 방사선을 만들어 각 방사선에서 밝기값 기반 임계값 기법으로 얻어진 심장외부 영역을 이용하여 대략적인 초기 심장영역의 경계를 추출한다. 둘째, 각각의 방사선에서 임계치로 추출된 초기 심장영역의 위치를 포함하여 경계와 영역정보를 이용해 추출된 새로운 후보들과 신뢰도의 경쟁을 수행하여 높은 신뢰성을 가진 심장 경계를 검출한다. 셋째, 방사선 기법으로 경계획득이 어려운 심장의 오목한 영역에서 경계를 따라 회전하면서 국부적으로 방사선 조사법을 적용하여 경계를 보완한다. 제안된 방법은 실제 환자의 심장 수술 도중에 얻어진 초음파 영상에 적용되어 고무적인 결과를 획득했다.

• 한국해양공학회지
• /
• 제24권4호
• /
• pp.23-31
• /
• 2010

The flow around a remotely-operated vehicle (ROV) has been investigated numerically to improve the resistant performance by modifying the hull form of the ROV. In the case of the base hull form considered in this study, form drag rather than friction drag was the dominant component of total drag. Subsequently, the surfaces that were most susceptible to local pressure effects were modified to give them a more streamlined shape. Eleven different hull forms were chosen to undergo surface modification for drag reduction. In addition, four different boat-tail appendages with different slant angles were installed at the stern to reduce the wake vortices that are induced by the local regions of very low pressure. Consequently, a total of 11 different hull forms for drag reduction were considered. The final hull form, which combined the hull for which surface modification resulted in the lowest drag with a boat-tail appendage with a 15-degree slant angle, resulted in a drag reduction of 20%.

• 대한조선학회논문집
• /
• 제59권3호
• /
• pp.134-140
• /
• 2022

Ship local structure sometimes experiences severe vibration due to the resonance with an excitation force generated by the propulsion system. In that case, the installation of dynamic vibration absorber such as Tuned Mass Damper (TMD) on the structure can be considered as an effective alternative countermeasure to reduce the troublesome vibration if structural modification or change of excitation frequencies is difficult. Meanwhile, the conventional optimal design method of TMD premises the target structure exposed on an excitation force without the constraint of its magnitude and frequency range. However, the frequencies of major ship excitation forces due to propulsion system are normally bounded and its magnitude is varied according to its operation speed. Hence, the optimal design of TMD to reduce the resonant vibration of ship local structure should be differently approached compared with the conventional ones. For the purpose, this paper proposes an optimal design method of TMD considering maximum frequency and magnitude variation of a target harmonic excitation component. It is done by both lowering the resonant response at the 1st natural frequency and locating the 2nd natural frequency over maximum excitation frequency for the idealized 2 degree of freedom system consisted of the structure and the TMD. For the validation of the proposed method, a numerical design case of TMD for a ship local structure exposed on resonant vibration due to a propeller excitation force is introduced and its performance is compared with the conventionally designed one.

• 한국지진공학회논문집
• /
• 제11권4호
• /
• pp.65-77
• /
• 2007

Site response analyses were performed based on equivalent linear technique using shear wave velocity profiles of 162 sites collected around the Korean peninsula. The site characteristics, particularly the shear wave velocities and the depth to the bedrock, are compared to those in the western United States. The results show that the site-response coefficients based on the mean shear velocity of the top 30m ($V_{S30}$) suggested in the current code underestimates the motion in short-period ranges and overestimates the motion in mid-period ranges. The current Korean code based on UBC is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. From the results of numerical estimations, new regression curves were derived between site coefficients ($F_{a}\;and\;F_{v}$) and the fundamental site periods, and site coefficients were grouped based on site periods with reasonable standard deviations compared to site classification based on $V_{S30}$. Finally, new site classification system and modification of design response spectra are recommended considering geotechnical characteristics in Korea.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1997년도 추계학술대회
• /
• pp.35-39
• /
• 1997

Recent development of human genetics and techniques of gene transfer and expression have opened the way for investigating novel approaches based on the genetic modification of cells to treat both inherited and acquired diseases. This approach is referred to as gene therapy. Over the past few years, gene therapy has moved from the laboratory to phase I clinical trials. Although the clinical performance of gene transfer experiments is still in an early phase of development, the NIH of Health Recombinant DNA Advisory Comittee (RAC) has approved more than 150 protocols that involve gene transfer or putative gene therapy procedures in clinical settings. Many sectors of society in United States have participated in the design and formulation of these clinical trials through local Institutional Review Boards, the National Institutes of Health (NIH) RAC, the Chemotherapy Evaluation Program of the National Cancer institute, and the FDA. Currently, clinical trials involving gene modification are under way at many medical centers throughout the United Slates. The goals of these trials are as follows. (1) The design should be directed to short-term achievable goals. (2) Each clinical trial is best considered as an intermediate step in a multistep process. (3) The design should identify evaluable proximate endpoints for toxicity and for efficacy, (4) The potential benefits and possible risks for patients participating in these trial should be defined.