• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1326-1329
• /
• 2009

In large-area LCD displays, we have developed two new control technologies for high-power LED backlight. The Novel control technology called scanning control and local gray control. In addition, a conceptual display system power management was developed. We have implemented high power-LED module driving system which can achieve power saving and cost down. Finally, we designed LED light-bar module of the side type as a backlight source. It not only achieved light & thin but also reduced the quantity of LEDs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2975-2980
• /
• 2015

Edge detection is one of image processing techniques applied for a variety of purposes in a number of areas and it is used as a necessary pretreatment process in most applications. Detect this edge has been conducted in various fields at domestic and international. In the conventional edge detection methods, there are Sobel, Prewitt, Roberts and LoG, etc using a fixed weights mask. Since conventional edge detection methods apply the images to the fixed weights mask, the edge detection characteristics appear somewhat insufficient. Therefore in this study, to complement this, preprocessing using gray-level transformation function and algorithm finding final edge using maximum and minimum value of estimated mask by local mask are proposed. And in order to assess the performance of proposed algorithm, it was compared with a conventional Sobel, Roberts, Prewitt and LoG edge detection methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.943-949
• /
• 2000

In object analysis, line and curve finding plays a universal role. And, it can be accomplished by detecting ridges and ravines in digital gray-scale images. In this paper, we present a new method of detecting ridges and ravines by using local min and max operations. This method uses erosion and dilation properties of these fuzzy logic operations and requires no information of ridge or ravine direction, so that the method is simple and easy in comparison with the conventional analytical methods. The experimental results show that the technique has a strong ability in finding ridges and ravines.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.4
• /
• pp.499-505
• /
• 1998

In developing an automated surface inspect algorithm, we have designed a hierarchical classifier using neural network. The defects which exist on the surface of cold mill strip have a scattering or singular distribution. We have considered three major problems, that is preprocessing, feature extraction and defect classification. In preprocessing, Top-hit transform, adaptive thresholding, thinning and noise rejection are used Especially, Top-hit transform using local minimax operation diminishes the effect of bad lighting. In feature extraction, geometric, moment, co-occurrence matrix, and histogram ratio features are calculated. The histogram ratio feature is taken from the gray-level image. For defect classification, we suggest a hierarchical structure of which nodes are multilayer neural network classifiers. The proposed algorithm reduced error rate by comparing to one-stage structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1990-1993
• /
• 2003

In this paper, we propose a technique for automatic spinal deformity detection from $moir\acute{e}$ topographic images. Normally the $moir\acute{e}$ stripes show symmetry as a human body is almost symmetric. According to the progress of the deformity of a spine, asymmetry becomes larger. Numerical representation of the degree of asymmetry is therefore useful in evaluating the deformity. First, displacement of local centroids and difference of gray values are evaluated statistically between the left- and the right-hand side regions of the $moir\acute{e}$ images with respect to the extracted middle line. We classify the moire images into two categories i.e., normal and abnormal cases from the features, employing discriminant analysis. An experiment was performed employing 1,200 $moir\acute{e}$ images and 85% of the images were classified correctly.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.365-370
• /
• 1997

In this paper we suggest a development of surface defect inspection algorithms for cold mill strip using tree structure. The defects which exist in a surface of cold mill strip have a scattering or singular distribution. This paper consists of preprocessing, feature extraction and defect classification. By preprocessing, the binarized defect image is achieved. In this procedure, Top-hit transform, adaptive thresholding, thinning and noise rejection are used. Especially, Top-hit transform using local min/max operation diminishes the effect of bad lighting. In feature extraction, geometric, moment, co-occurrence matrix, histogram-ratio features are calculated. The histogram-ratio feature is taken from the gray-level image. For the defect classification, we suggest a tree structure of which nodes are multilayer neural network clasifiers. The proposed algorithm reduced error rate comparing to one stage structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.951-956
• /
• 1990

The present paper describes a new technique for associating images employing a set of local constraints among pixels on an image. The technique describes the association problem in terms of consistent labeling which is an abstraction of various kinds of network constraints problems. In this particular research, a pixel and its gray value correspond to a unit and a label, respectively. Since constraints among units on an image are defined with respect to each n-tuple of pixels, performance of the present association technique largely depends on how to choose the n-tuples on an image plane. The main part of this paper is devoted to discussing this selection scheme and giving a solution to it as well as showing the algorithm of association. Also given are some results of the simulation performed on synthetic binary images to examine the performance of proposed technique, followed by the argument on further studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.826-831
• /
• 1988

This paper presents an approach to segment an image into areas of surfaces, and to compute the surface properties from a gray-scale image in order to describe the surfaces for reconstruction of the 3-D shape of the objects. In general, an rigid body has several surfaces and many edges. But if it is not polyhedoron, it is necessary not only to describe the relation between surfaces, i.e. its line drawings but also to represent the surfaces' equations itself. In order to compute the surfaces' equation we use a probability of edge distribution. At first it is extracted edges from a gray-level image as much as possible. These are not only the points that maximize the change of an image intensuty but candidates which can be seemed to be edges. Next, other character of a surface (color, coordinates and image intensity) are extracted. In our study, we call the all feature of a surface as "texture", for example color, intensity level, orientation of an edge, shape of a surface and so on. These features of a surface on a pixel of an image plane are mapped to a point of the feature space, and segmented to each groups by cluster analysis on this space. These groups are considered to represent object surface in an image plane. Finally, the states of object surface in 3-D space are computed from distributional probability of local and overall statistical features of a surface, and from shape of a surface.a surface.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.3
• /
• pp.1-9
• /
• 2008

This paper presents a novel optimization-based saliency-preserving method for converting color images to grayscale in a manner consistent with conventional approaches of black-and-white photographers. In black-and-white photography, a colored filter called a contrast filter has been commonly employed on a camera to lighten or darken selected colors. In addition, local exposure controls such as dodging and burning techniques are typically employed in the darkroom process to change the exposure of local areas within the print without affecting the overall exposure. Our method seeks a digital version of a conventional contrast filter to preserve visually-important image features. Furthermore, conventional burning and dodging techniques are addressed, together with image similarity weights, to give edge-aware local exposure control over the image space. Our method can be efficiently optimized on GPU. According to the experiments, CUDA implementation enables 1 megapixel color images to be converted to grayscale at interactive frames rates.

• Asia-Pacific Journal of Atmospheric Sciences
• /
• v.54 no.4
• /
• pp.623-637
• /
• 2018

This study investigates the effects of horizontal resolution, cumulus parameterization scheme (CPS), and probability forecasting on precipitation forecasts over the Korean Peninsula from 00 UTC 15 August to 12 UTC 14 September 2013, using the limited-area ensemble prediction system (LEPS) of the Korea Meteorological Administration. To investigate the effect of resolution, the control members of the LEPS with 1.5- and 3-km resolution were compared. Two 3-km experiments with and without the CPS were conducted for the control member, because a 3-km resolution lies within the gray zone. For probability forecasting, 12 ensemble members with 3-km resolution were run using the LEPS. The forecast performance was evaluated for both the whole study period and precipitation cases categorized by synoptic forcing. The performance of precipitation forecasts using the 1.5-km resolution was better than that using the 3-km resolution for both the total period and individual cases. The result of the 3-km resolution experiment with the CPS did not differ significantly from that without it. The 3-km ensemble mean and probability matching (PM) performed better than the 3-km control member, regardless of the use of the CPS. The PM complemented the defect of the ensemble mean, which better predicts precipitation regions but underestimates precipitation amount by averaging ensembles, compared to the control member. Further, both the 3-km ensemble mean and PM outperformed the 1.5-km control member, which implies that the lower performance of the 3-km control member compared to the 1.5-km control member was complemented by probability forecasting.