• 한국표면공학회지
• /
• 제41권6호
• /
• pp.292-300
• /
• 2008

Dental implant system is composed of abutment, abutment screw and implant fixture connected with screw. The problems of loosening/tightening and stability of abutment screw depend on surface characteristics, like a surface roughness, coating materials and friction resistance and so on. For this reason, surface treatment of abutment screw has been remained research problem in prosthodontics. The purpose of this study was to investigate the stability of TiN and WC coated dental abutment screw, abutment screw was used, respectively, for experiment. For improving the surface characteristics, TiN and WC film coating was carried out on the abutment screw using EB-PVD and sputtering, respectively. In order to observe the coating surface of abutment screw, surfaces of specimens were characterized, using field emission scanning electron microscope(FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The stability of TiN and WC coated abutment screw was evaluated by potentiodynamic, and cyclic potentiodynamic polarization method in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion potential of TiN coated specimen was higher than those of WC coated and non-coated abutment screw. Whereas, corrosion current density of TiN coated screws was lower than those of WC coated and non-coated abutment screw. The stability of screw decreased as following order; TiN coating, WC coating and non-coated screw. The pitting potentials of TiN and WC coated specimens were higher than that of non-coated abutment screw, but repassivation potential of WC coated specimen was lower than those of TiN coated and non-coated abutment screws due to breakdown of coated film. The degree of local ion dissolution on the surface increased in the order of TiN coated, non-coated and WC coated screws.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.143-154
• /
• 2012

무가선 저상트램은 친환경 고효율 교통수단으로서 저렴한 건설비, 도시 미관의 개선, 도시 주변 지역 활성화 및 승객 편의성 확보 등의 장점을 보유한 신교통 수단으로 10개 이상의 지역단체에서 도입을 검토 중에 있다. 이에 따라 무가선 저상트램 차량과 노면선로 및 도로교통과 복합된 신호시스템의의 개발, 인프라시스템 구축을 위한 연구가 활발히 진행 중에 있다. 무가선 저상트램 노면선로 중 도심지 구간에서는 레일이 노면에 매립되는 매립형궤도 시스템이 적용되고 있다. 매립형궤도 시스템은 소음 진동의 저감, 공기 단축 및 유지보수 최소화 등의 장점을 보유한 것으로 알려져 있다. 이에 본 논문에서는 국내에서 시공사례가 전무한 매립형궤도 시스템을 설계하여 시험시공을 수행하였고 시공과정에서 발생한 문제점을 파악하였다. 또한 시험선 완공 후 진동과 소음을 일반 자갈도상궤도와 비교 측정하여 매립형궤도 시스템의 소음 진동 저감 성능을 정략적으로 분석하였다.

• 한국지리정보학회지
• /
• 제13권3호
• /
• pp.74-90
• /
• 2010

본 연구는 GIS 기반 자원순환정보구축 방법을 제시하고, 현재 울산 산업단지에서 진행되고 있는 산업공생네트워크 및 해외사례의 물질별 연계업종쌍을 파악하여 추가적인 산업공생관계 파악을 목적으로 하였다. 자원순환정보는 울산의 국가산업단지, 일반산업단지 및 공업지역에 입지하고 있는 제조업체에 대한 속성정보를 투입정보, 이동정보, 산출정보 등으로 구분하여 DB를 작성하였으며, 이를 제조업체의 공간정보와 결합하여 GIS 기반 자원순환정보를 구축하였다. 본 연구에서 활용된 자료는 총 3,768개이다. 분석결과, 물질, 스팀, 폐수를 이용한 추가적 산업공생파악이 가능한 것으로 분석 되었다. 특히 울산산업특성에 적합한 물질별 연계업종이 명확히 제시될 경우 산업공생파악이 효과적으로 이루어 질 것으로 판단된다. 따라서 본 연구의 자원순환정보 구축방법은 타 지역의 자원순환정보 구축시 하나의 모형으로 제시가 가능할 것으로 사료된다.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2001년도 제18차 정기총회 및 학술발표 PROCEEDINGS
• /
• pp.24-39
• /
• 2001

These experiments were conducted to evaluate the nutritional and feeding value of red pepper seed oil meal (RPSOM) as local vegetable protein ingredients for poultry feeding. In the first experiment, nutritional values of RPSOM were evaluated by analyzing chemical compositions and determining true metabolizable energy (TME), nitrogen corrected TME (TMEn) and true available amino acid (TAAA) contents. According to the chemical analysis, RPSOM contained 22.50％ of crude protein, 4.75％ of ether extract, 27.70％ of crude fiber, 0.34 mg／g of capsaicin and 49.97 ppm of xanthophylls. The values of TME and TMEn determined by force-feeding 16 roosters (ISA-Brown) were 1.73 kcal／g and 1.63 kcal／g on dry matter basis, respectively. The average TAAA value of 16 amino acids measured by the force－feeding technique was 81.70％. These values were used for formulating experimental diets containing various levels of RPSOM for broiler chicks and laying hens. Two feeding trials were made to investigate the effects of dietary incorporation of RPSOM into chicken feed performances of broiler chicks and laying hens. In the broiler feeding (Exp. 2), a total of two hundred twenty-five, 4 wk old male broiler chicks (Ross) were randomly divided into 9 groups of 25 birds each and assigned to three experimental diets containing 0, 5 and 10% RPSOM. The birds were fed ad libitum the diets for 3 wk and feed intake, weight gain and feed conversion rate were determined. At the end of the feeding, the blood levels of glutamate oxaloacetate transaminase (GOT), gamma glutamyl transpeptidase (GGT), blood urea nitrogen (BUN) and cholesterol, and the body and fatty acid compositions of leg muscle were measured. No significant differences were observed in weight gain, feed intake, feed conversion rate, body composition, serum levels of GOT, GGT and BUN among the treatments. However, blood cholesterol level was lower (P＜0.05) in 10% RPSOM diet group than those in the other. The dietary RPSOM at 5 and 10% levels increased the content of linoleic acid (P＜0.05) in leg muscle compared to that of control group. The results indicate that RPSOM can be used for broiler feed up to 10% without any significant negative effects on broiler performance. In the layer feeding (Exp. 3), the effects of dietary RPSOM on the performances of laying hen were investigated by feeding ninety 45 wk old laying hens (ISA-Brown) with experimental diets containing 0, 5 and 10% RPSOM for 4 wk (30 birds per treatment). Measurements were made on egg production rate, egg weight, feed intake, Haugh unit, egg shell strength which was higher (P＜0.05) in layers fed 10% RPSOM diet compared to those fed 0 and 5% RPSOM diets. Thus, it can be concluded that RPSOM can be included into laying hen feed up to 10% without any harmful effects.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.225-236
• /
• 2016

Objectives: Nanomaterials have been used in various fields. As use of nanoproducts is increasing, workers dealing with nanomaterials are also gradually increasing. Exposure assessments for nanomaterials have been carried out for protection of worker's health in workplace. Exposure studies were mainly focused on manufacturing processes, but these studies on after-treatment processes such as refinement, weighing, and packing were insufficient. So, we investigated exposure characteristics of particles during after-treatment processes of $Al_2O_3$ fibers and Ni powders. Methods: Mass-production of Ni powder process was carried out in enclosed capture-type canopy hood. In a developing stage, $Al_2O_3$ was handled with a local ventilation unit. Exposure characteristics of particles were investigated for $Al_2O_3$ fiber and Ni powder processes during the periods of 10:00 to 16:00, 20 May 2014 and 13:00 to 16:00, 21 May 2014, respectively. Three real-time aerosol instruments were utilized in exposure assessment. A scanning mobility particle sizer(SMPS, nanoscan, model 3910, TSI) and an optical particle counter(OPC, portable aerosol spectrometer, model 1.109, Grimm) were used to determine the particle size distribution in the size range of 10-420 nm and $0.25-32{\mu}m$, respectively. In addition, a nanoparticle aerosol monitor(NAM, model 9000, TSI) was used to measure lung-deposited nanoparticle surface area. Membrane filters(isopore membrane filter, pore size of 100 nm) were also used for air sampling for the FE-SEM(model S-5000H, Hitachi) analysis using a personal sampling pump(model GilAir Plus by 2.5 L/min, Gilian). Conclusions: For Ni powder after-treatment process, only 27% increase in particle concentration was found during the process. However, for $Al_2O_3$ fiber after-treatment process, significant exposure(1.56-3.34 times) was observed during the process.

• Radiation Oncology Journal
• /
• 제5권2호
• /
• pp.149-155
• /
• 1987

전산화 단층촬영 (CT)은 진단 분야 뿐 아니라 방사선 치료 계획 및 치료효과의 추적 등 치료분야에 까지 광범위하게 사용되고 있다. 그러나 환자의 체위가 치료시와는 다름으로 얻어진 영상이 치료시의 영상과는 차이가 있으며, 삼차원적인 치료면적의 계산이 곤란할 뿐 아니라 조영제를 사용함으로 생길 수 있는 선량계산의 오라 및 정확한 조사야가 표현되지 많음으로 병소 및 중요 정상장기의 선량 측정이 정확하지 못한점 등의 단점이 없다. 저자들은 1986년 5월 1일부터 1987린 4월 30일까지 영남대학병원 치료방사선과에서 치료받은 총 365명의 환자 중 일반 CT의 단점을 보완한 치료용 CT와 종래의 simulation을 병행한 106명의 치료계획을 비교 분석하여 다음과 같은 결과를 얻었다. 치료용 CT후 두경부 암 환자의 $47\%$, 흉부암 환자의 $79\%$, 복부암 환자의 $63\%$에서 치료계획의 변경이 있어 치료용 CT가 두경부암, 흉부암, 복부암에서 거의 철수적임을 시사하였다. 그러나 직장암, 자궁경부암에서는 추가치료의 조사야의 측정 및 선량계산 이외의 전예에서 치료계획의 변경이 없었다. 선량분포의 비교측정에서는 윤곽만을 사용한 종래의 선량계산이 CT를 사용한 경우에 비해서 두경부암에서는 평균 $20\%$, 흉부암, 복부암에서는 약 $10\%$의 차이를 보여 전례에서 CT보다 과측정 되었음을 보여 종래의 윤곽만을 사용한 치료계획시의 저선량 조사에 대한 보정이 필요함을 시사하였다.

• Toxicological Research
• /
• 제31권2호
• /
• pp.157-163
• /
• 2015

Nanotechnology has advanced at an extremely rapid pace over the past several years in numerous fields of research. However, the uptake of nanoparticles (NPs) into the body after administration through various routes may pose a risk to human health. In this study, we investigated the potential ocular toxicity of 20-nm, negatively- charged zinc oxide (ZnO) NPs in rats using micro-computed tomography (micro-CT) and histopathological assessment. Animals were divided into four groups as control group, ZnO NPs treatment group (500 mg/kg/day), control recovery group, and ZnO NPs treatment and recovery group. Ocular samples were prepared from animals treated for 90 days (10 males and 10 females, respectively) and from recovery animals (5 males and 5 females, respectively) sacrificed at 14 days after final treatment and were compared to age-matched control animals. Micro-CT analyses represented the deposition and distribution of foreign materials in the eyes of rats treated with ZnO NPs, whereas control animals showed no such findings. X-ray fluorescence spectrometry and energy dispersive spectrometry showed the intraocular foreign materials as zinc in treated rats, whereas control animals showed no zinc signal. Histopathological examination revealed the retinopathy in the eyes of rats treated with ZnO NPs. Neuronal nuclei expression was decreased in neurons of the ganglion cell layer of animals treated with ZnO NPs compared to the control group. Taken together, treatment with 20-nm, negatively-charged ZnO NPs increased retinopathy, associated with local distribution of them in ocular lesions.

• 한국유기농업학회지
• /
• 제20권3호
• /
• pp.345-356
• /
• 2012

본 연구는 2009년에 친환경 농산물 재배 농가들이 사용하는 자가 제조 액비 실태를 파악하고자 친환경 농산물 인증을 받은 29농가를 대상으로 액비의 종류, 재료, 제조과정, 활용방법 및 효과 등에 대해서 조사를 실시하였다. 농가에서 사용하는 액비의 재료는 대부분 주변에서 쉽게 구할 수 있는 것들이었고 제조방법은 주재료에 미생물의 에너지원으로 사용할 수 있는 당밀이나 흑설탕을 첨가하고 그리고 발효 미생물원으로 부엽토, 시판미생물, 시군센터에서 보급하는 미생물 또는 토착미생물 배양체를 사용하고 있었다. 농가에서 제조하여 활용하고 있는 액비 종류는 발효액비, 천혜녹즙, 아미노산액비, 칼슘액비, 인산액비 등 이었고 이들 액비는 생육촉진, 개화촉진, 꽃눈형성, 당도증가, 저장성 증대, 병해충 저항성 증가, 그리고 고온장해 억제 등의 효과가 있는 것으로 조사되었다. 수집된 액비의 성분분석 결과, pH와 EC의 범위는 시료간의 차이가 크며 질소, 인산 등 다량원소 함량은 대부분 적었으며 같은 재료를 이용하여 제조된 액비라도 제조방법에 따라 양분함량이 각각 다른 것으로 조사되었다.

• 한국수정란이식학회지
• /
• 제25권4호
• /
• pp.263-266
• /
• 2010

Prediction of semen's fertilizing ability used in artificial insemination (AI) is one of very important factors on pig reproductive performance. In vitro fertilization (IVF) has been used for indirect evaluation of sperm's fertilizing ability and it has been showed as highly correlated index. In swine industry, increasing interest in preservation of boar semen raises questions on the sperm motility from semen used in commercial AI centers. Mitochondria in sperm mid-piece generate the energy to support motility and could be an explanation of impaired fertility. Objective of this study was to suggest usable sperm motility to farms in measuring the effect of sperm motility and sperm abnormality on in vitro production of embryo in which sperm's fertilizing ability can be determined indirectly. Semen samples were provided from local AI center and used within 3 days after collection. Semen samples were divided by 4 different motile groups (>70%; 61~70%; 51~60%; <50%) using CASA (computer-assisted sperm analysis) on the days of IVF. Developmental rate to the blastocyst stage from over 61% motile sperm group showed significantly higher rate than below 60% motile sperm group ($16.5{\pm}0.7{\sim}18.4{\pm}0.8%$ vs $6.3{\pm}0.8{\sim}11.5{\pm}0.7%$, p<0.05). In experiment to determine the relationship between sperm motility and viability and abnormality, over 61% motile sperm groups showed significantly higher viability rate compared to below 60% motile sperm groups ($84.8{\pm}4.0{\sim}88.1{\pm}4.0%$ vs $69.1{\pm}4.0{\sim}74.2{\pm}4.0%$, p<0.05). On the other hand, morphological sperm abnormality showed significantly higher in over 70% motile sperm group ($10.2{\pm}2.2$ vs $16.0{\pm}2.2{\sim}21.0{\pm}2.2%$, p<0.05). In experiment to find the correlation between sperm motility of 4 different motile groups and amount of mitochondria, lower motility group also showed lower level of mitochondria (p<0.05). The mitochondria parameter used in this study showed another possibility to differentiate the sperm motility. Taken together, because below 60% motile semen used in AI reduce the fertility, AI centers should provide the over 60% motile sperm to the farms at the time of AI.

• 대한화학회지
• /
• 제38권8호
• /
• pp.547-551
• /
• 1994

$Nd_{1-x}Ba_xFeO_{3-y}$계에 대한 각 조성의 시료를 1200$^{\circ}C$ 대기압하에서 반응물을 가열하여 합성하였고 X-선 분말 회절분석을 통하여 고용체가 합성되었음을 확인하였다. X-선 회절분석 결과 x = 0.00과 0.25는 팔면체장이 뒤틀린 orthoferrite형의 사방정계이며, x = 0.50과 0.75의 조성을 갖는 화합물은 단순입방정계이다. 고용체내의 Fe이온은 $Fe^{3+}$와 $Fe^{4+}$이온의 혼합원자가 상태로 존재하기 때문에 $Fe^{4+}$이온의 몰비와 산소공위로부터 비화학량론적 조성식들을 결정하였다. Mossbauer분광분석결과 A자리에 $Ca^{2+}$ 또는 $Sr^{2+}$ 이온이 치환된 계들과는 달리 $Ba^{2+}$ 이온이 치환된 화합물들은 $FeO_6$와 $FeO_4$ 뿐만 아니라 $FeO_5$이 5배위장이 형성됨을 알 수 있었다. 또한 x = 0.25와 0.50 조성들은 초상자성의 스펙트럼을 보이는데 이는 $Fe^{3+}$ 와 $Fe^{4+}$ 이온간의 강자성 상호작용을 하는 영역을 형성하기 때문이다. 모든 시료의 전기전도도는 반도성 범위에 속한다. 시료는 $O^{2-}$ 이온을 매개로 한 Fe 이온간의 전자전달과정에서 $Fe^{4+}$ 이온은 전자 받게 준위로 작용하기 때문에 $Fe^{4+}$이온이 증가함에 따라 전기전도도의 활성화에너지가 감소된다.