• 한국해양공학회지
• /
• 제21권1호
• /
• pp.1-6
• /
• 2007

While a typhoon is traveling, characteristics of its wind fields are continuously changing, producing severe changes in local water level and wave conditions, especially, when a typhoon comes into shallow water. However, there have not been many studies related to local typhoon effects, especially, considering real time changes of wind direction related to the coastal topography. In the study, the characteristics of the wind field by typhoon and topographical characteristics in shallow water are considered, as well as conditions of wave climate estimation. These are performed by the SWAN (Simulating waves nearshore) model, in order to estimate the growth of wave energy due to the wind field. It can be strongly suggested that the wave energy of theof an inner bay should be estimated when the direction of the bay entrance and the wind direction of the typhoon are identical. The result of the numerical calculations is in better agreement with the observed data than the result of the conventional estimation techniques.

• Structural Engineering and Mechanics
• /
• 제24권3호
• /
• pp.323-337
• /
• 2006

In this paper, the hysteretic behaviors of channel and C-section cold-formed steel members (CFSMs) under cyclic axial loading were simulated with the finite element method. Geometric and material nonlinearities, Bauschinger effect, strain hardening and strength improvement at corner zones were taken into account. Extensive numerical results indicated that, as the width-to-thickness ratio increases, local buckling occurs prematurely. As a result, the hysteretic behavior of the CFSMs degrades and their energy dissipation capability decreases. Due to the presence of lips, the hysteretic behavior of a C-section steel member is superior to that of its corresponding channel section. The intermediate stiffeners in a C-section steel member postpone the occurrence of local buckling and change its shapes, which can greatly improve its hysteretic behavior and energy dissipation capability. Therefore, the CFSMs with a large width-to-thickness ratio can be improved by adding lips and intermediate stiffeners, and can be used more extensively in residential buildings located in seismic areas.

• International Journal of Fluid Machinery and Systems
• /
• 제3권4호
• /
• pp.324-331
• /
• 2010

Cavitation in cryogenic fluids generates substantial thermal effects and strong variations in fluid properties, which in turn alter the cavity characteristics. In order to investigate the cavitation characteristics in cryogenic fluids, numerical simulations are conducted around an axisymmetric ogive in liquid nitrogen and hydrogen respectively. The modified Merkle cavitation model and energy equation which accounts for the influence of cavitation are used, and variable thermal properties of the fluid are updated with software. A good agreement between the numerical results and experimental data are obtained. The results show that vapor production in cavitation extracts the latent heat of evaporation from the surrounding liquid, which decreases the local temperature, and hence the local vapor pressure in the vicinity of cavity becomes lower. The cavitation characteristics in cryogenic fluids are obtained that the cavity seems frothy and the cavitation intense is lower. It is also found that when the fluid is operating close to its critical temperature, thermal effects of cavitation are more obviously in cryogenic fluids. The thermal effect on cavitation in liquid hydrogen is more distinctively compared with that in liquid nitrogen due to the changes of density ratio, vapour pressure gradient and other variable properties of the fluid.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.65-70
• /
• 2005

Fracture behavior and pipe strength are very important to the integrity of energy plants, ocean structures, and so forth. The pipes of energy plants and ocean structures are subject to local wall thinning, resulting from severe erosion-corrosion damage. Recently, the effects of local wall thinning on fracture strength and fracture behavior of piping systems have been the focus of many studies. In this paper, the elasto-plastic analysis is performed by FE code ANSYS on straight pipes with wall thinning. We evaluated the failure mode, fracture strength and fracture behavior, using FE analysis. Also, the effect of the axial strain on deformations and failure modes was estimated by FE analysis.

• 에너지공학
• /
• 제15권4호
• /
• pp.256-276
• /
• 2006

경쟁적 전력시장에서, 송전혼잡은 지역적 시장지배력의 핵심 요인들 중 하나이다. 재무적 송전권을 구매한 시장 참여자는 그들이 지불한 혼잡 세를 돌려받음으로써 재무적 보호를 받을 수 있다. 하지만 많은 연구에서, 이러한 송전권이 오히려 시장지배력을 강화시킴을 보였다. 따라서 본 논문은 새로운 개념의 송전권인 Contingent Transmission Rights을 이용해 지역적 시장지배력을 완화시키는 것이 목적이다. 본 논문은 각 모선의 한계가격 (Locational Marginal Pricing LMP)을 기반으로 한 모선별 가격제도(Nodal Pricing)와 최적조류계산(Optimal Power Flow)를 이용해 사례연구를 수행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제12권2호
• /
• pp.214-219
• /
• 1991

To study the effect of solvents and counterions in Z-DNA crystal of d(5BrC-G-5BrC-G-5BrC-G), we performed the local energy analysis and then molecular dynamics simulations. Since counterions raise serious caging problems in crystal simulations, it is very important to search for the possible positions before simulations. For this purpose, the local energy analysis was done for the whole crystal volume. It is shown from our simulation that counterions along with water molecules play a bridging role to bind adjacent oligomers so as to form the crystal. In this crystal, each water molecule bound to Gua-N2H, either directly or indirectly, hydrates the adjacent anionic phosphate oxygen, and thus assists Gua to be in a syn position. From the simulation, the average root-mean-square deviation of allthe DNA heavy atom coordinates from the X-ray data is $0.99{\AA}$ . The bases are less deviated from the X-ray positions than the phosphates. The temperature factors from the simulation are consistent with those from the X-ray refinement, showing that the phosphates are more mobile than the bases.

• Earthquakes and Structures
• /
• 제21권5호
• /
• pp.445-460
• /
• 2021

This study experimentally explored the behaviour of 12 concrete filled steel tube (CFST) and steel tube columns subjected to lateral cyclic loading. The L/D ratio was 12.3 while D/t ratios were 45.4, 37.8 and 32.4, classifying these 12 specimens into 3 groups. Each group included 3 CFST and 1 steel tube columns and were tested to failure. The experimental results indicated that CFST specimens reached the state of 'collapse prevention' (drift 4%) prior to the occurrence of local buckling. Strength degradation of CFST specimens did not occur up to the failure by buckling. This showed the favourable characteristic of CFST columns in preventing collapse of structures subjected to earthquakes. The high energy absorption capability in the post collapse limit state was appropriate for dissipating energy in structures. Compared to steel tube columns, CFST columns delayed local buckling and prevented inward buckling. Consequently, CFST columns exhibited their outstanding seismic performance in terms of the increased ultimate resistance, capacity to sustain 2-3 additional load cycles and significantly higher drift. A simple and reasonably accurate model was proposed to predict the ultimate strength of CFST columns under lateral cyclic loading.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권12호
• /
• pp.4326-4344
• /
• 2021

The SinGAN is one of generative adversarial networks that can be trained on a single nature image. It has poor ability to learn more global features from nature image, and losses much local detail information when it generates arbitrary size image sample. To solve the problem, a non-linear function is firstly proposed to control downsampling ratio that is ratio between the size of current image and the size of next downsampled image, to increase the ratio with increase of the number of downsampling. This makes the low-resolution images obtained by downsampling have higher proportion in all downsampled images. The low-resolution images usually contain much global information. Therefore, it can help the model to learn more global feature information from downsampled images. Secondly, the attention mechanism is introduced to the generative network to increase the weight of effective image information. This can make the network learn more local details. Besides, in order to make the output image more natural, the TVLoss function is introduced to the loss function of SinGAN, to reduce the difference between adjacent pixels and smear phenomenon for the output image. A large number of experimental results show that our proposed model has better performance than other methods in generating random samples with fixed size and arbitrary size, image harmonization and editing.

• 농업과학연구
• /
• 제50권4호
• /
• pp.953-966
• /
• 2023

As the importance of renewable energy diffusion spreads, promotion of sustainable renewable energy projects such as agrivoltaics is expected to accelerate. Furthermore, to promote agrivoltaics projects, it must be considered the legislation related to agrivoltaics and Chungnam Province's local policy. This research focuses on the selection of the most suitable sites for agrivoltaics installations in Chungnam Province in South Korea. Therefore, the process of this research was as follows. First, the legislation related to agrivoltaics and local policy in Chungnam Province were identified. Second, it employs an analytic hierarchy process (AHP) to consider important criteria and their weights for site selection. Third, based on the weights calculated AHP, geographic information system (GIS) was performed to select most suitable location selection of agrivoltaics installations in Chungnam Province. The analysis identified approximately 60 promising most suitable location for agrivoltaics installations in Chungnam Province, primarily in the northern part of Chungnam Province. These areas are expected to meet electricity demands in nearby regions since these are relatively adjacent to Gyeonggi Province. According to the results of research, policy suggestions related to agrivoltaics were presented separately into the agricultural sector and the electricity power sector. The study's results serve as a valuable resource for future national-level candidate site selection for agrivoltaics projects.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.45-52
• /
• 2008

In order to investigate the initiation and propagation processes of a spherical detonation wave induced by direct initiation, numerical simulations were carried out using two-dimensional compressible Euler equations with an axisymmetric assumption and a one-step reaction model based on Arrhenius kinetics with various levels of ignition energy. By varying the amount of ignition energy, three typical initiation behaviors, which were subcritical, supercritical and critical regimes, were observed. Then, the ignition energy of more than $137.5{\times}10^6$ in non-dimensional value was required for initiating a spherical detonation wave, and the minimum ignition energy(i.e., critical energy) was less than that of the one-dimensional simulation reported by a previous numerical work. When the ignition energy was less than the critical energy, the blast wave generated from an ignition source continued to attenuate due to the separation of the blast wave and a reaction front. Therefore, detonation was not initiated in the subcrtical regime. When the ignition energy was more than the minimum initiation energy, the blast wave developed into a multiheaded detonation wave propagating spherically at CJ velocity, and then a cellular pattern radiated regularly out from the ignition center in the supercritical regime. The influence on ignition energy was observed in the cell width near the ignition center, but the cell width on the fully developed detonation remained constant during the expanding of detonation wave due to the consecutive formation of new triple points, regardless of ignition energy. When the ignition energy was equal to the critical energy, the decoupling of the blast wave and a reaction front appeared, as occurred in the subcrtical regime. After that, the detonation bubble induced by the local explosion behind the blast wave expanded and developed into the multiheaded detonation wave in the critical regime. Although few triple points were observed in the vicinity of the ignition core, the regularly located cellular pattern was generated after the onset of the multiheaded detonation. Then, the average cell width on the fully developed detonation was almost to that in the supercritical regime. These numerical results qualitatively agreed with previous experimental works regarding the initiation and propagation processes.