• The Korean Journal of Pain
• /
• v.25 no.3
• /
• pp.168-172
• /
• 2012

Background: The aim of the study was to investigate the feasibility of fluoroscopy-guided anterior approach for suprascapular nerve block (SSNB). Methods: Twenty patients with chronic shoulder pain were included in the study. All of the nerve blocks were performed with patients in a supine position. Fluoroscopy was tilted medially to obtain the best view of the scapular notch (medial angle) and caudally to put the base of coracoid process and scapular spine on same line (caudal angle). SSNB was performed by introducing a 100-mm, 21-gauge needle to the scapular notch with tunnel view technique. Following negative aspiration, 1.0 ml of contrast was injected to confirm the scapular notch, and 1 % mepivacaine 2 ml was slowly injected. The success of SSNB was assessed by numerical rating scale (NRS) before and after the block. Results: The average NRS was decreased from $4.8{\pm}0.6$ to $0.6{\pm}0.5$ after the procedure (P < 0.05). The best view of the scapular notch was obtained in a medial angle of $15.1{\pm}2.2$ ($11-19^{\circ}$) and a caudal angle of $15.4{\pm}1.7^{\circ}$ ($12-18^{\circ}$). The average distance from the skin to the scapular notch was $5.8{\pm}0.6$ cm. None of the complications such as pneumothorax, intravascular injection, and hematoma formation was found except one case of partial brachial plexus block. Conclusions: SSNB by fluoroscopy-guided anterior approach is a feasible technique. The advantage of using a fluoroscopy resulted in an effective block with a small dose of local anesthetics by an accurate placement of a tip of needle in the scapular notch while avoiding pneumothorax.

• Clean Technology
• /
• v.22 no.3
• /
• pp.168-174
• /
• 2016

The working environment is deteriorated due to a rise in temperature of a coal mine caused by increase of its depth and carriage tunnels. To improve the environment, the temperature distribution resulted by using the fan type ventilation system aiming for the temperature drop is calculated by using a fluid dynamic analysis program. The analysis shows that A coal mine needs 6,152 m³ min^-1 for in-flow ventilation rate but the total input air flowrate is 4,710 m³ min^-1, 1,442 m³ min^-1 of in-flow ventilation rate shortage and the temperature between the carriage tunnel openings and the workings with exhausting ventilation system type is 2~3 ℃ less than that with blowing ventilation system type. The exhausting ventilation system type would be more effective than blowing ventilation system when the distance between the carriage tunnel openings and the workings is relatively far.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.23-32
• /
• 2016

Today the issue of deterioration of industrial complexes that are located close to life space of residents has been raised as a cause of threats to the safety of local communities. In this study, in order to improve the current risk analysis and scope of community notification, simulated threat zones were comparatively analyzed by utilizing the threat zones of alternative accident scenarios and modes of seasonal weather, and the area with a high probability of damage upon the leakage of toxic substances was predicted by examining wind directions observed at each time slot for each season. In addition, limit evacuation time and minimum separation distance to minimize casualties were suggested, and a proposal to enable more reasonable safety measures for on-site workers and nearby residents made by reviewing the risk management plan currently utilized for emergency response.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.96-96
• /
• 2016

Nanotechnology mostly employs nano-materials and nano-structures with distinctive properties based on their size, structure, and composition. It is quite difficult to produce nano-materials and nano-structures with identical sizes, structures, and compositions in large quantities, because of spatiotemporal fluctuation of production processes. In other words, fluctuation is the bottleneck in nanotechnology. We propose three strategies to suppress such fluctuations: employing 1) difference between linear and nonlinear phenomena, 2) difference in time constants, and 3) nucleation as a bottleneck phenomenon. We are also developing nano- and micro-scale guided assembly using plasmas as a plasma nanofabrication.1-5) We manipulate nano- and micro-objects using electrostatic, electromagnetic, ion drag, neutral drag, and optical forces. The accuracy of positioning the objects depends on fluctuation of position and energy of an object in plasmas. Here we evaluate such fluctuations and discuss the mechanism behind them. We conducted in-situ evaluation of local plasma potential fluctuation using tracking analysis of fine particles (=objects) in plasmas. Experiments were carried out with a radio frequency low-pressure plasma reactor, where we set two quartz windows at the top and bottom of the reactor. Ar plasmas were generated at 200 Pa by applying 13.56MHz, 450V peak-to-peak voltage. The injected fine particles were monodisperse methyl methacrylate-polymer spheres of $10{\mu}m$ in diameter. Fine particles were injected into the reactor and were suspended around the plasma/sheath boundary near the powered electrode. We observed binary collision of fine particles with a high-speed camera. The frame rate was 1000-10000 fps. Time evolution of their distance from the center of mass was measured by tracking analysis of the two particles. Kinetic energy during the collision was obtained from the result. Potential energy formed between the two particles was deduced by assuming the potential energy plus the kinetic energy is constant. The interaction potential is fluctuated during the collision. Maximum amplitude of the fluctuation is 25eV, and the average is 8eV. The fluctuation can be caused by neutral molecule collisions, ion collisions, and fluctuation of electrostatic force. Among theses possible causes, fluctuation of electrostatic force may be main one, because the fine particle has a large negative charge of -17000e and the corresponding electrostatic force is large compared to other forces.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.398-407
• /
• 1999

In the present image processing technique, the concept of the gradient indicator(GI) has been introduced to find out the depth-of-field in sizing large particles ranging from $30{\mu}m$ to $30{\mu}m$ where using of the concept of the normalized contrast value(VC) is not appropriate. The gradient indicator is defined as the ratio of the local value to the maximum possible value of the gray-level gradient in an image frame. The gradient indicator decreases with the increases of the particle size and the distance from the exact focal plane. A particle is considered to be in focus when the value of the gradient indicator at its image boundary stays above a critical value. This critical gradient indicator($GI_{critical}$) is defined as the maximum gradient indicator($GI_{max}$) subtracted by a constant ${\Delta}GI$ which is to account for the particle-size effect. In the present ca.so, the value of ${\Delta}GI$ was set to 0.28 to keep the standard deviation of the measured particles mostly within 0.1. It was also confirmed that, to find the depth-of-field for small particles(${\leq}30{\mu}m$) with the same measurement accuracy, tho concept of the critical normalized contrast($VC_{critical}$) is applicable with 85% of the maximum normalized contrast value($VC_{max}$). Finally, the depth-of-field was checked for the size range between $10{\mu}m$ and $300{\mu}m$ when the both in-focus criteria ($GI_{critical}$ and $VC_{critical}$) were adopted. The change of the depth-of-field with the particle size shows good linearity in both the VC-applicable and the GI-applicable ranges with a reasonable accuracy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5_2
• /
• pp.176-185
• /
• 2010

This study aimed to clarify meanings of Palkyung(八景) in different regions which can be considered as the prototype of the region's cultural landscape and also to confirm the change process by pointing out landscape characteristics and finally, to provide a foundation for the regions to establish their own identities, so they could be provided against the changes from developments in other areas. The relationship between the characteristics of landscape values and the components of 32 Palkyung in 4 places those are Gogunsan, Wido, Gunsan and Byunsan under Saemankeum area have been analyzed and evaluated from operational point of view to clarify the structure of the landscape concept. Some important differentiation points would be the sunset of the West Sea, sailing boats and the sceneries related to fishing as they are in the West Sea Islands and the coastal regions; and it clearly reflects the local customs and the characteristics of the landscapes. Each of Gogunsan, Wido and Gunsan Palkyung has 2 distance views with 4km of visible area while Byunsan Palkyung has only 1; and it is considered that because it is mountain area. Most of the Byunsan Palkyung has close range views except for Seohaenakjo and there are around 4 close range views in other areas. There were 4 landscape dominated influence areas each in Gunsan and Byunsan, which means that there are comparatively more close to middle range views. Moreover, each region contains 2 to 3 views of psychological influence but as mentioned, Byunsan has only 1 view of psychological influence. Therefore it is very important and valuable thing to consider the scenic relationship, preservation and reconstruction of Palkyung when planning the project.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1996.11a
• /
• pp.42-48
• /
• 1996

Glare phenomenon by sun's altitude and strong sunlight make a much visual handicap. And so, it reaches to unreadable situation although enough illumination in the fore site student of a window site and passage site. In school student seat arrange in the order of their height. So, cause the eyesight acuity according to distance is different, eyesight of backseat's student drop 1.0 and less in spite of 1.0, a learning effect reduces rather then that of the fore site student for site and Passage sitestudents. Therefore. in school, the conclusion's alteration of school structure, position's alteration and material quality's improvement of blackboard are needed, should be local lighting in blackboard. Therefore, we think that in other in improve the effect of lesson by the student, the student seats are not given by uniform disposition in the order of their height but change by a specified period.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.67-77
• /
• 2006

This thesis proposes an effi챠ent method for extracting a prostate volume from 3D ultrasound image by using wavelet transform and SVM classification. In the proposed method, a modulus image for each 2D slice is generated by averaging detail images of horizontal and vertical orientations at several scales, which has the sharpest local maxima and the lowest noise power compared to those of all single scales. Prostate contour vertices are determined accurately using a SVM classifier, where feature vectors are composed of intensity and texture moments investigated along radial lines. Experimental results show that the proposed method yields absolute mean distance of on average 1.89 pixels when the contours obtained manually by an expert are used as reference data.

• The Journal of Fisheries Business Administration
• /
• v.5 no.1
• /
• pp.9-42
• /
• 1974

Korea is a peninsular country surrounded by seas on three sides, and the fishing industry has carried out the service of suppling to the people with important anima protein. The distribution of fishery products has very complicated structures, because the production is in charge of small producers scattering along the coast all over the country, while consumpstion is made by separate homes in areas away from producing district. The relation between these two factors the structures make very complicated. The most typical and special structures of fishery distridution are distinguished in two, that is, one is landing market, the other is inland market. Landing markets have been monopolized by fishermen's cooperatives, providing with landing facilities and building sites. Fish markets played not only an important role in the landing, but distribution and price determination of catches by auction or tender. Inland markets are two types of wholesale market in consuming center, one is the terminal market for urban consumers, the other type is the local market for rural consumers. Fundamental functions of landing markets are gathering, assessment, and distribution functions. Gathering function is in charge of wholesaler in fishery cooperative. Gathering amounts are equal to gathering capacity of wholesaler and transact ability of licensed dealers as shown below model. Gathering amount=f.gathering capacity(=pre price.landing facility.account of wholesaler.distance of fishing ground.conveniency purchasing.home port)=fㆍ transact ability of licensed dealers≒f.population or port, and table 1 indicates these relationship. Assessment and distribution functions are in charge of licensed dealers in consumption side. Assessment function should bring the value in production activity through the auction between the cooperative seller and the licensed dealer as buyer. For fair trade transaction in auction, the free competition is supposed to be a prerequisite among the licensed dealers. The ideal condition for free competition is sameness in the scale of buying amount by licensed delaers, but it is almost impossible to attain its goal in actual marketing.

• Genomics & Informatics
• /
• v.14 no.4
• /
• pp.230-233
• /
• 2016

Linkage disequilibrium (LD) is the non-random association between the loci and it could give us a preliminary insight into the genetic history of the population. In the present study LD patterns and effective population size (Ne) of three Korean cattle breeds along with Chinese, Japanese and Mongolian cattle were compared using the bovine Illumina SNP50 panel. The effective population size (Ne) is the number of breeding individuals in a population and is particularly important as it determines the rate at which genetic variation is lost. The genotype data in our study comprised a total of 129 samples, varying from 4 to 39 samples. After quality control there were ~29,000 single nucleotide polymorphisms (SNPs) for which $r^2$ value was calculated. Average distance between SNP pairs was 1.14 Mb across all breeds. Average $r^2$ between adjacent SNP pairs ranged between was 0.1 for Yanbian to 0.3 for Qinchuan. Effective population size of the breeds based on $r^2$ varied from 16 in Hainan to 226 in Yanbian. Amongst the Korean native breeds effective population size of Brindle Hanwoo was the least with Ne = 59 and Brown Hanwoo was the highest with Ne = 83. The effective population size of the Korean cattle breeds has been decreasing alarmingly over the past generations. We suggest appropriate measures to be taken to prevent these local breeds in their native tracts.