• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.245-245
• /
• 2010

This paper and the rear passivation experiment was local back surface field Nd:$YVO_4$ green laser and the experiment was used performed to screen printing. Laser power 100%, with a fixed frequency for 60kHz Current of 29A and 30A were tested in two conditions. The point contact distances of 0.2mm, 0.4mm, 0.6mm, 0.8mm and 29A and 30A current conditions, it was found that is suitable for 0.4mm.

• 대한본초학회지
• /
• 제24권2호
• /
• pp.1-5
• /
• 2009

Objectives : HRHDT has been known as a useful prescription with antibiotic, anti-inflammatory, antioxidative and immunosuppressive activity. To evaluate anti-inflammatory effect of HRHDT, we treated HRHDT-skin in Balb/c mice model induced contact hypersensitivity. Methods : Contact hypersensitivity, a local inflammatory respinse of skin, was induced by spreading the back skin of Balb/c mice with 1% DNCB. HRHDT-skin was prepared by dissolving 3% 1,3-butylene glycol extract of HRHDT in solution and treated 2 weeks on the back skin. Results: HRHDT-skin significantly reduced TEWL and erythema by 0.4-1% of DNCB treatment compared with control group. HRHDT-skin reduced IgE on serum obtained from blood of DNCB-treated Balb/c mice. Histopathological examination showed that thickening of the epidermis, hyperkeratosis and the infiltration of inflammatory cells were found in Balb/c mice under conventional circumstances. Conclusions : These results showed that HRHDT-skin could be used as a pharmaceutical material with antiinflammatory effects by reducing IgE in contact hypersensitivity dermatitis Balb/c mice by DNCB.

• Journal of Advanced Marine Engineering and Technology
• /
• 제11권4호
• /
• pp.50-58
• /
• 1987

At present it has been cleared that even carefully polished surfaces have irregularities on them which are large compared with molecular dimensions by the progress of a scanning electron microscope. When two solids are placed together, the real area of contact is very small, so that the local pressure is high and, in general, exceeds the yield pressure of the metal. Plastic flow of the solid occurs at the summits of the irregularities so that the real area of contact is proportional to the applied load. There is adhesion at local resions of contact and the friction is, in a large measure, the force required to shear them. On this view point, the friction experiment with different specimens which are carbon steel, copper and constantan was attempted to know the characteristics of temperature change in contact with different metals. Various experiments are summerized as follows; 1) With metals of high melting point, momentary 1000 .deg. C may last below $10^{-4}$ of a second. It is thought that above phenomena back up previous adhesion theory in wear. 2) As a general rule, surface temperature in contact with different metals becomes high when the load increases while it is observed that surface temperature decreases when the load increases with shapes of specimens.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.687-687
• /
• 2013

In rearpoint contact solar cell and the PERC (passivated emitter rear contact) type cell, surfaces were passivated by SiO2 or Al2O3 to increase solar cell efficiency. Therefore, we have investigated the effect of surface passivation for crystalline silicon solarcell using mass-production atomic layer deposited (ALD) Al2O3. The patttern which consists of cylinders with 100um diameter and 5um height was formed by PR patterning on Si (100) substrate and then Al2O3 of about 10nm and 20nm thickness was deposited by ALD. The pattern in 10 nm Al2O3 film was removed by dipping in aceton solution for about 10 min but the pattern in 20 nm Al2O3 film was not. The influences of process temperature and heat treatment were investigated using microwave photoconductance decay (PCD) and Quasi-Steady-State photoconductance (QSSPC). The solar cell process used in this work combines the advantage of using the applicability of a selective deposition associated with a ALD passivation and the use of low-cost screen print for the contacts formation.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.29-43
• /
• 2017

This study investigates the blast resistance of fiber-reinforced cementitious composite (FRCC) panels, with fiber volume fractions of 2%, subjected to contact explosions using an emulsion explosive. A number of FRCC panels with five different fiber mixtures (i.e., micro polyvinyl alcohol fiber, micro polyethylene fiber, macro hooked-end steel fiber, micro polyvinyl alcohol fiber with macro hooked-end steel fiber, and micro polyethylene fiber with macro hooked-end steel fiber) were fabricated and tested. In addition, the blast resistance of plain panels (i.e., non-fiber-reinforced high strength concrete, and non-fiber-reinforced cementitious composites) were examined for comparison with those of the FRCC panels. The resistance of the panels to spall failure improved with the addition of micro synthetic fibers and/or macro hooked-end steel fibers as compared to those of the plain panels. The fracture energy of the FRCC panels was significantly higher than that of the plain panels, which reduced the local damage experienced by the FRCCs. The cracks on the back side of the micro synthetic fiber-reinforced panel due to contact explosions were greatly controlled compared to the macro hooked-end steel fiber-reinforced panel. However, the blast resistance of the macro hooked-end steel fiber-reinforced panel was improved by hybrid with micro synthetic fibers.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.54.2-54.2
• /
• 2009

결정질 실리콘 태양전지의 알루미늄 후면전극이 패시베이션층의 공극을 통하여 확산됨으로써 국부 후면전계(local back surface field)가 형성되는 후면 점접촉 구조를 제조하였으며, 이에 대한 공정조건 및 특성을 연구하였다. 후면 패시베이션층은 실리콘 기판과 금속전극사이에 삽입됨으로써 표면 재결합속도를 낮추고, 후면 반사도를 높여 광흡수 경로를 증가시킬 수 있다. 고가의 사진식각기술 대신에 저가의 단순한 공정인 레이저 식각기술을 사용하여 후면 패시베이션층에 균일하고 잘 정렬된 공극 패턴을 형성할 수 있었다. 레이저 식각 조건 및 소성조건에 따른 Al 확산 국부 후면전계의 단면 형상을 주사전자현미경(SEM)을 사용하여 관찰하였으며 이에 대한 전기적, 광학적 특성 변화를 조사하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.121.1-121.1
• /
• 2011

현재 상용화되고 있는 단결정 실리콘 태양전지는 알루미늄 페이스트를 이용하여 후면의 전 영역에 전계를 형성한다. 최근에는 고효율을 얻기 위하여 후면에 패시베이션 효과와 장파장에 대한 반사도를 증가 시키는 SiNx막을 증착 후, 국부적으로 전계를 형성하는 국부 후면 전극(Local back surface field)기술이 연구되고 있다. 본 연구에서는 전면만 텍스쳐 된 단결정 실리콘 웨이퍼를 이용하였다. Plasma Enhanced Chemical Vapor Deposition(PECVD)를 이용하여 전,후면에 SiNx를 증착 하였고 후면의 국부적인 전극 패턴 형성을 위하여 SiNx 식각용 페이스트를 사용한 스크린 프린팅 기술을 이용하였다. 스크린 프린팅을 이용하여 패턴이 형성된 후면에 알루미늄을 인쇄 한 후 Rapid Thermal Process(RTP)를 이용하여 소성 공정 조건을 변화시켰다. 소성 조건 동안 형성되는 후면 전계층은 peak 온도와 승온속도, 냉각 속도에 따라 형상이나 특성이 변화하기 때문에 소성 조건을 변화시키며 국부적 후면 전계 형성의 최적화에 관한 연구를 수행하였다. 패이스트를 이용하여 SiNx를 식각 후 광학 현미경(Optical Microscopy)을 사용하여 SiNx의 식각 유무를 살펴보았고, RTP로 형성된 국부 전계층의 형성 두께, 주변 부분의 형상을 살피기 위해 도핑 영역을 혼합수용액으로 식각하여 주사 전자 현미경(SEM)을 이용하여 관찰 하였다. 또한 후면의 특성을 살펴보기 위해 분광 광도계(UV/VIS/NIR Spectrophotometer)를 사용하여 후면 SiNx층의 유무에 따른 반사도를 비교, 측정 하였다.

• 대한본초학회지
• /
• 제23권2호
• /
• pp.59-65
• /
• 2008

Objectives : HRHDT has been known as a useful prescription with antibiotic, anti-inflammatory, antioxidative and immunosuppressive activity. To evaluate anti-atopic dermatitis effect of HRHDT, we treated HRHDT in NC/Nga mice model skin induced contact hypersensitivity. Methods : Contact hypersensitivity, a local inflammatory response of skin, was induced by spreading the back skin of NC/Nga mice with 0.4${\sim}$1% DNCB. HRHDT was prepared by dissolving 3% HRHDT in solution and treated 3 weeks on the back skin. Results : HRHDT significantly reduced TEWL and erythema by 0.4${\sim}$1% of DNCB treatment compared to control group. HRHDT also reduced IgE on serum obtained from blood of DNCB-treated mice. Conclusions : These results showed that HRHDT could be used as a pharmaceutical material with anti-atopic dermatitis effect by reducing IgE in contact, hypersensitivity atopic dermatitis NC/Nga mice model by DNCB.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.334-334
• /
• 2013

In the past decade, the infrared detectors based on intersubband transition in quantum dots (QDs) have attracted much attention due to lower dark currents and increased lifetimes, which are in turn due a three-dimensional confinement and a reduction of scattering, respectively. In parallel, focal plane array development for infrared imaging has proceeded from the first to third generations (linear arrays, 2D arrays for staring systems, and large format with enhanced capabilities, respectively). For a step further towards the next generation of FPAs, it is envisioned that a two-dimensional metal hole array (2D-MHA) structures will improve the FPA structure by enhancing the coupling to photodetectors via local field engineering, and will enable wavelength filtering. In regard to the improved performance at certain wavelengths, it is worth pointing out the structural difference between previous 2D-MHA integrated front-illuminated single pixel devices and back-illuminated devices. Apart from the pixel linear dimension, it is a distinct difference that there is a metal cladding (composed of a number of metals for ohmic contact and the read-out integrated circuit hybridization) in the FPA between the heavily doped gallium arsenide used as the contact layer and the ROIC; on the contrary, the front-illuminated single pixel device consists of two heavily doped contact layers separated by the QD-absorber on a semi-infinite GaAs substrate. This paper is focused on analyzing the impact of a two dimensional metal hole array structure integrated to the back-illuminated quantum dots-in-a-well (DWELL) infrared photodetectors. The metal hole array consisting of subwavelength-circular holes penetrating gold layer (2DAu-CHA) provides the enhanced responsivity of DWELL infrared photodetector at certain wavelengths. The performance of 2D-Au-CHA is investigated by calculating the absorption of active layer in the DWELL structure using a finite integration technique. Simulation results show the enhanced electric fields (thereby increasing the absorption in the active layer) resulting from a surface plasmon, a guided mode, and Fabry-Perot resonances. Simulation method accomplished in this paper provides a generalized approach to optimize the design of any type of couplers integrated to infrared photodetectors.

• 대한본초학회지
• /
• 제28권4호
• /
• pp.77-81
• /
• 2013

Objectives : Horse oil (HO) has been used long time as the folk medicine of many Asian countries such as Korea, Mongol, China, India and Japan. HO has been used for anti-bacterial, anti-inflammatory, and anti-pruritic purposes in skin. However, it is still largely unknown whether HO modulates the skin condition. In this study, we attempted to evaluate the anti-inflammatory effect of HO on the 1 % of 2, 4-dinitro-1-chlorobenzene (DNCB)-induced contact hypersensitivity in Balb/c mice. Methods : To find the anti-inflammatory effect of HO, contact hypersensitivity, a local inflammatory response of skin, was induced on the back of Balb/c mice by sensitization and repeated application by 1% DNCB and HO treated 2 weeks on the 1% of DNCB-treated Balb/c mice. Excised mice skins were stained with hematoxylin and eosin and serum IgE level was measured by mouse IgE ELISA kit. Results : In this study, we found that HO reduced erythema by 1% of DNCB treated Balb/c mice. Also, HO recovered histopathological features such as the thickening of epidermis, hyperkeratosis and the infiltration of inflammatory cells in 1% of DNCB treated Balb/c mice. In addition, HO reduced IgE level on the serum obtained from blood of 1% of DNCB-treated Balb/c mice. Conclusion : Taken together, these results showed that HO could be used as a pharmaceutical material with anti-inflammatory effects by reducing of erythema, IgE level and recovering of histopathological features skin on DNCB-induced contact hypersensitivity in Balb/c mice model.