• 대한교통학회지
• /
• 제26권2호
• /
• pp.57-67
• /
• 2008

도시내부에서 발생하는 화물자동차의 이동에 따라 도심상업지역에서는 노상 하역공간(loading zone)이 반드시 필요하다. 그렇지만, 현재 대도시의 도심상업지역의 경우는 하역공간의 설치미비로 인하여 화물자동차들은 마땅한 조업공간이 없어 노상에서 불법주정차 행위를 하고 있는 실정이다. 이로 인하여 도심교통의 장애를 야기하는 하나의 원이 되었으며, 그로 인한 혼잡은 심각한 수준에 도달해 있는 실정이다. 따라서, 본 연구에서는 이러한 문제점을 다소나마 해결할 수 있도록 노상하역공간의 정비방안을 살펴보고, 부산의 도심상업지역인 서면지역 일대를 대상으로 하여 노상하역주차 특성을 면밀히 고찰함으로써 그 적용가능성도 확인할 수 있었다. 본 연구에서 노상 하역공간의 정비는 규모 즉, 조업을 행할 수 있는 주 정차 베이(bay)의 개수 추계와 함께 이들의 적절한 배치장소를 모색하는 것이다. 규모적 측면에서의 주 정차 베이 수는 조업차량의 도착율 및 서비스율에 기초한 대기행렬의 적용을 통하여 산출 할 수 있었으며, 배치장소의 결정은 화물운반에 대한 저항함수를 정식화함으로써 최소 저항이 되는 위치를 산정할 수 있었다.

• 대한토목학회논문집
• /
• 제26권6A호
• /
• pp.935-941
• /
• 2006

지진과 같은 동적반복하중을 받은 강구조물은 정적하중시와 다른 이력거동을 보인다. 이는 동적변형중인 구조용 강재는 정적상태와 다른 역학적 특성 및 응력-변형률 관계를 보이기 때문이다. 즉, 지진하중을 받는 원형 강기둥과 같은 강구조물의 이력거동을 정확히 예측하기 위해서는 정동적 변형 상태를 가정한 재하속도에 따른 대상구조물 내하력 및 변형의 차이점을 명확히 파악해야 한다. 이에 본 연구에서는 저자에 의해 제안된 SM490강재의 동적 반복소성모델과 이를 적용한 3차원 탄소성 유한요소해석을 이용하여 재하속도와 지름-두께(D/t)비를 변수로한 SM490 원형강기동의 동적해석을 수행하였다. 해석 결과를 통하여 정적에서 동적변형상태로 재하속도 변화에 따른 SM490 원형강기둥의 이력거동 특성 즉, 내하력 및 에너지소산효율의 변화를 명확히 파악하였다.

• 한국환경과학회지
• /
• 제24권2호
• /
• pp.221-228
• /
• 2015

In this research traditional Buddhist dietary life style was studied as an alternative for both saving water and decreasing water pollution from household. A traditional dietary life style for the Buddhist monks, called Balwoo Gongyang, and its modernized one for citizens, called Dish Gongyang were examined with water use amount, wastewater quality and pollutant loading rate, and were compared with the kitchen wastewater from household. And several types of natural detergent were also examined to compare their effect on the wastewater quality and pollutant loading rate. This research was carried out using the wastewater from Balwoo and Dish Gongyang in J building located in Seoul. Wastewater generation from Balwoo Gongyang that was about $1.0{\ell}$/capita/day was very low compare to that from dish washing in normal household($32.6{\ell}$/capita/day). In case of Dish Gongyang, water generation was 1.8 times higher than that from Balwoo Gongyang, but it was just 1/19.2 of normal household. When the wastewater quality of Balwoo Gongyang was compared with the kitchen wastewater of normal household, SS was 1/16($15mg/{\ell}$), COD was 1/7($22.1mg/{\ell}$), BOD was 1/9($24.1mg/{\ell}$) and T-N was 1/16($1.7mg/{\ell}$). Pollutant loading rate from Balwoo Gongyang was very low, COD 18.0 mg/capita/day, SS 12.3 mg/capita/day and it was 1/290, 1/639 of that from dish washing wastewater from normal household, respectively. Pollutant loading rate from Dish Gongyang was also low 1/13(SS)~1/144(TN) compared to dish washing wastewater from normal household. As a natural detergent, used water from washing rice showed very low pollutant loading rate. It was concluded that Dish Gongyang that was a modernized and simplified dietary life style of Balwoo Gongyang, was very eco-friendly. Especially when it was combined with natural detergents using by-product from cooking process, its effect on the water pollution was very low.

• 한국양식학회지
• /
• 제13권3호
• /
• pp.267-275
• /
• 2000

이 연구는 값싸고 높은 비 표면적을 제공할 수 있는 발포스티로폼 입자를 packed column 에어레이터의 산소전달 매질로 이용 가능성을 알기 위하여 매질의 깊이와 수리학적부하량에 따른 산소 전달 특성과 효율을 조사 하였다. 이용된 발포스티로폼 입자는 직경 2.5 mm의 구형이었으며, 비표면적이 1350 $m^2$/$m^3$으로 일반적으로 이용되는 매질에 비해 약 3.7~7.0배 더 넓은 비표면적을 제공할 수 있다. 이 매질을 직경 10 cm, 높이 1 m의 내부 관찰이 용이한 아크릴 관으로 제작한 packed column 에어 레이터에 0, 4.5, 9그리고 18 cm의 매질을 채워 넣고, 수온 20, 25 및 3$0^{\circ}C$에 대해 수리학적 부하량을 2, 4 및 5.6 $m^3$/$m^2$/min로 각각 달리하여 산소전달특성을 실험한 결과(Exp. 1),모든 실험 수온에서 수리학적 부하량이 증가함에 따라 표준산소전달률이 증가하였으나 매질의 깊이는 9 cm 까지는 증가하다가 18 cm에서는 감소하였다. 표준산소전달률은 매질 깊이 9 cm에서 수리학적 부하량이 5.6 $m^3$/$m^2$/min일 때 가장 높았다. 그러나 수리학적 부하량이 증가함에 따라 펌프의 소모 전력이 증가하여, 단위소모 전력당 표준에어레이션 효율은 매질의 깊이 9 cm에서 수리학적부하량 2 $m^3$/$m^2$/min일 때 가장 높았다. 따라서 모든 수리학적 부하량에서 매질의 깊이 9 cm 일 때 표준산소전달률과 표준에어레이션 효율이 가장 좋았다. 이 매질을 직경 20 cm, 높이 2 m의 PVC관으로 제작한 packed column 에어레이터에 깊이를 0, 9, 18, 27 및 36 cm로 넣고 순환여과식 시설 내에 실험실 규모의 적용실험을 통해 에어레이터의 효율을 조사하였는데 (Exp.2), 실험 수온 27$^{\circ}C$에서, Exp. 1에서와 동일한 3개의 수리학적 부하량에서 산소 전달률을 측정한 결과, Exp. 1에서와 같이 수리학적 부하량과 매질의 깊이의 증가에 따라 산소 전달률이 증가하였으며, 매질의 깊이가 가장 깊은 36 cm에 대해, 수리학적 부하량이 2 $m^3$/$m^2$/min 일때, 2 kg 02 kg $O_2$/kW-hr의 가장 높은 표준에어레이션효율을 나타내었다. 위의 두 실험 결과에 따라 packed column 에어레이터에서 발포스티로폼 입자를 산소전달 매질로 이용하여 산소 전달률을 증가시킬 수 있다는 것을 확인할 수 있었다.

• Computers and Concrete
• /
• 제22권3호
• /
• pp.291-303
• /
• 2018

As the concept of "sponge city" is proposed, the pervious concrete for permeable pavement has been widely used in pavement construction. This paper aims at investigating the dynamic behavior and energy evolution of pervious concrete under impact loading. The dynamic compression and split tests are performed on pervious concrete by using split Hopkinson pressure bar equipment. The failure criterion on the basis of incubation time concept is used to analyze the dynamic failure. It is demonstrated that the pervious concrete is of a strain rate sensitive material. Under high strain rate loading, the dynamic strength increases while the time to failure approximately decreases linearly as the strain rate increases. The predicted dynamic compressive and split tensile strengths based on the failure criterion are in accordance with the experimental results. The total damage energy is found to increase with the increasing of strain rate, which means that more energy is needed to produce irreversible damage as loading rate increases. The fractal dimensions are observed increases with the increasing of impact loading rate.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.199-203
• /
• 2002

In this paper, the effects of water contents on combustion characteristics of paper sludge and capacity of fluidized bed combustor(FBC) were investigated using 0.26m diameter, 1.75m height pilot-plant scale combustor. Combustion tests of paper sludge containing water contents between 40wt% and 50wt% were performed. The temperature and emission variation, the pressure inside combustor were measured to monitor the fluidization quality. The experimental results showed that 30kg/hr feeding rate of sludge containing water up to 45wt% was preferable for this system. Sludge loading rate, heat release rate were calculated from experimental data as major parameters showing FBC capacity. Comparsion with sludge loading rate from other source was also performed

• 한국환경과학회지
• /
• 제2권4호
• /
• pp.325-330
• /
• 1993

A number of experiments were conducted in order to investigate the organic removal efficiency and biomass characteristics according to the organic shock loading rate in a fluidized bed biofilm reactor. At the operation conditions of HRT, 8.44 hour, superficial upflow velocity, 0.9 cm/sec and temperature, 22$\pm$$1^{\circ}C$, the removal efficiency of SCOD was founded to be 96.5, 92 and 90 % with the organic shock loading rate of 3.5, 10.8 and 33 kgCOD/m$^3$ㆍday, respectively. Within the F/M ratio ranged 0.4 to 2.0 kgCOD/kgVSSㆍday, the SCOD removal efficiency was shown as 90% at F/M ratio of 2.0 kgCOD/kgVSSㆍday, but the TCOD removal efficiency was 72 % at F/M ratio of 1.8 kgCOD/kgVSSㆍday. The average biomass concentrations were 7800, 14950 and 27532 mg/l on the organic shock loading rate of 3.5, 10.8 and 33 kgCOD/$\textrm{m}^3$ㆍday, respectively. This result was agreed with the fact that more biomass could be produced at high concentration of substrate, but some biomass was detached at the onset of shock and easily acclimated at the shock condition.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.171-179
• /
• 1999

The present research investigated the interaction among loading level, corrosion rate and flexural deflection of reinforced concrete beams. 10cm$\times$15cm$\times$110cm reinforced concrete beams were prepared and subjected to different levels of flexural loading, including 0%, 45% and 75% of the ultimate load. The beams with either a pre-load or a sustained load were also exposed to a laboratory environment with ponding and wetting/drying cycling at room temperature. Half cell potential and galvanized current measurements were taken to monitor corrosion process of reinforcing steel. After corrosion initiation, external current was applied to some of the beams to accelerate corrosion propagation. The beam deflections were recorded during the entire tests. The results indicate that loading level has significant effect on corrosion rate. The beams under a sustained load had much higher corrosion rate than the pre-loaded and then unloaded beams. Significant corrosion may result in an increase in beam deflection and affect serviceability of the structure. The present research may provide an insight into structural condition evaluation and service life predictions of reinforced concrete.

• 대한치과의사협회지
• /
• 제51권4호
• /
• pp.190-197
• /
• 2013

A titanium based screw shaped dental implant was first introduced by Branemark and a treatment protocol where the restoration of edentulous area by connecting abutment after the osseointegration of the titanium surface of the implant and surrounding bone structure has been proposed. Although this protocol is widely accepted as a standard up to date, the healing duration of 3-6 months as well as the need for provisional prostheses during this period present as a major drawback. Immediate loading has been accomplished through the advent of various implant designs, enforced surface treatments, diverse forms of abutment, and delicate surgical techniques together with the increase in demand from the patients. The success rate of the immediate loading technique has been first reported as 85.7% by Dr. Schnitman in 1990 which recently has been reported up to 100% in the case of immediate loading in single tooth by Dr. Kan. To ameliorate the success rate of immediate loading technique, selection of patients presenting a sound bone quality and quantity, acquiring primary stability through delicate surgical techniques and fabrication of prostheses which accounts for biological stabilities should all be taken into consideration. This presentation introduces the understanding of biological stability of immediate loading, various methods for measurement of stability and clinical cases regarding immediate loading technique.

• 한국환경과학회지
• /
• 제9권4호
• /
• pp.351-367
• /
• 2000

Air-lift biofilm reactor should be an admirable process substituting conventional activated sludge process, because of its small area requirement as well as high volumetric loading capacity and stability against loading and chemical shocks. However most of the past research on the performance of ABR was focused on the sewage treatment. This research studied the applicability of ABR to treat high strength wastewater. A bench-scale ABR was operated to treat high strength synthetic wastewater, tannery wastewater and petrochemical wastewater, and its applicability was conclusive In case of synthetic wastewater, ABR showed good performance in which the substarate removal efficiency was higher that 80% even under short HRT(1.4 hr) and high volumetric loading rate(9.3 kgCODcr/$m^3$.day). When ABR was applied to treat tannery wastewater, it was suggested that the maximum volumetric loading rate and F/M ratio should be 7.7kgCODcr/$m^3$.day, 0.76 $day^{-1}$, respectively. And high substrate removal efficiency over than 90 % was observed with 4,000 mgCODcr/L of petrochemical wastewater. Even though effluent concentration was quite high, ABR should be applicable to treat the high strength wastewater, because of its high loading capacity.