• 대한임베디드공학회논문지
• /
• 제7권3호
• /
• pp.151-156
• /
• 2012

When mounting the sensor device in the way of Plug&Play, sensor device drivers need to be loaded and linked dynamically. Since a sensor node platform is based on small 8 bit MCU, dynamic loading and linking technique used in Windows and Linux can not be applied. In this paper, we present how to link and load dynamically sensor device drivers for sensor device Plug&Play. We implement a prototype and evaluate it to make sure that there is no performance degradation like sensor device driver connection speed and memory usage. Connection speed overhead increases to 0.2ms. Memory usage overhead increases to hundreds byte. It shows that there is no heavy influence in running the actual program.

• Structural Engineering and Mechanics
• /
• 제34권2호
• /
• pp.159-174
• /
• 2010

Elastic buckling load of perforated steel plates is typically predicted using the finite element or conjugate load/displacement methods. In this paper an artificial neural network (ANN)-based formula is presented for the prediction of the elastic buckling load of rectangular plates having a circular cutout. By using this formula, the elastic buckling load of perforated plates can be calculated easily without setting up an ANN platform. In this study, the center of a circular cutout was chosen at different locations along the longitudinal x-axis of plates subjected to linearly varying loading. The results of the finite element method (FEM) produced by the commercial software package ANSYS are used to train and test the network. The accuracy of the proposed formula based on the trained ANN model is evaluated by comparing with the results of different researchers. The results show that the presented ANN-based formula is practical in predicting the elastic buckling load of perforated plates without the need of an ANN platform.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.135-148
• /
• 2017

Topside areas on an offshore oil and gas platform are highly susceptible to explosion. A blast wall on these areas plays an important role in preventing explosion damage and must withstand the expected explosion loads. The uniformly distributed loading condition, predicted by Explosion Risk Analyses (ERAs), has been applied in most of the previous analysis methods. However, analysis methods related to load conditions are inaccurate because the blast overpressure around the wall tends to be of low-level in the open area and high-level in the enclosed area. The main objectives of this paper are to study the effects of applying different load applications and compare the dynamic responses of the blast wall. To do so, various kinds of blast pressures were measured by Computational Fluid Dynamics (CFD) simulations on the target area. Nonlinear finite element analyses of the blast wall under two types of identified dynamic loadings were also conducted.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.61-63
• /
• 2004

The procurement of a mobile microwave scatterometer platform involved the consideration to ensure a mobile platform and equipment selected full-filled technical requirement and safety standard in Malaysia. Designing, and modification works involved engineering methodology in determining and selecting a suitable hydraulic telescopic boom that suit a selected mobile platform available locally. The mobile platform is a delivery system for microwave remote sensing microwave scatterometer and other accessories to any locations in Malaysia. Total loading to be carried by the mobile platform is 4500 kg and its overall weight must be 16,000 kg as recommended by hydraulic telescopic boom manufacturers. The telescopic boom will elevate microwave scatterometer system including the antenna to a maximum height of 27 m, and can also be rotated through $3600^{\circ}$. A mechanism is incorporated in the system to enable tracking or monitoring angular movement of the hydraulic telescopic boom when positioned towards predetermined target.

• Coupled systems mechanics
• /
• 제9권5호
• /
• pp.433-454
• /
• 2020

In-place analysis for offshore platforms is essentially required to make proper design for new structures and true assessment for existing structures. The structural integrity of platform components under the maximum and minimum operating loads of environmental conditions is required for risk assessment and inspection plan development. In-place analyses have been executed to check that the structural member with all appurtenances robustness and capability to support the applied loads in either storm condition or operating condition. A nonlinear finite element analysis is adopted for the platform structure above the seabed and the pile-soil interaction to estimate the in-place behavior of a typical fixed offshore platform. The analysis includes interpretation of dynamic design parameters based on the available site-specific data, together with foundation design recommendations for in-place loading conditions. The SACS software is utilized to calculate the natural frequencies of the model and to obtain the response of platform joints according to in-place analysis then the stresses at selected members, as well as their nodal displacements. The directions of environmental loads and water depth variations have important effects on the results of the in-place analysis behavior. The result shows that the in-place analysis is quite crucial for safe design and operation of offshore platform and assessment for existing offshore structures.

• 스마트미디어저널
• /
• 제2권1호
• /
• pp.37-41
• /
• 2013

스마트폰의 차세대 인터페이스 연구의 일환인 지능형 사용자 인터페이스 플렛폼(Smart Use Interface Platform : SUIP)은 스마트폰의 플랫폼을 확장하기 위하여 연구되었으며 플랫폼 기능이 탑재된 외부 디바이스의 찾기와 해당 디바이스의 디바이스 드라이버의 동적 로딩기능 등을 가지고 있다. 본 논문은 지능형사용자 인터페이스 플렛폼에 직접 접속하기 힘든 센서네트워크나 기타 디바이스들을 중간에 변환과정을 통해 플렛폼에 접속이 가능하게 하며 아울러 접속된 디바이스의 기능을 강화할 수 있는 센서 등을 결합한 플랫폼 변환기인 SUIP 변환기를 구현하고 이에 대한 용용을 소개하고 있다.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.18-25
• /
• 1999

Western coastal ports of Korea experience severe tidal range with up to 9.7 meter between high and low tides. The significant water level variation implicates many operational difficulties during loading and un-loading from cargo ships. To overcome problems due to tide and to secure the continuous loading operation, a new loading system for container cargo called "container pallet system" is developed and introduced in the paper. Three types of structure forms, offshore structural deck, double bottom structural form and the mixed form, are inverstigated with MSC/NASTRAN software. The results prove that the mixed type structure with truss enforcement is found to be the most appropriate for the region.

• 한국정보전자통신기술학회논문지
• /
• 제11권5호
• /
• pp.493-506
• /
• 2018

본 논문에서는 직무별로 취업에 필요한 역량을 나타내고, 구직자가 온라인상에서 포트폴리오를 효율적으로 작성하고 관리하는 OOPP(Optimized Online Portfolio Platform)를 제안한다. 제안하는 OOPP는 세 가지 모듈로 구성된다. 첫째, JDCM(Job Data Collection Module)은 직업정보 사이트의 구인 광고들을 수집하여 스프레드시트에 저장한다. 둘째, CSM(Competency Statistical Medel)은 수집한 구인 광고들을 텍스트 마이닝하여 직무별로 요구되는 핵심 역량을 분류한다. 셋째, OBBM(Optimize Browser Behavior Module)은 브라우저의 처리속도를 개선하여 사용자가 데이터를 빠르게 조회할 수 있게 한다. OBBM은 검색엔진의 연산을 최적화하는 PSES(Parallel Search Engine Sub-Module)과 이미지 텍스트 등의 로드를 최적화하는 OILS(Optimized Image Loading Sub-Module)로 구성된다. 제안하는 OOPP의 성능분석 결과 CSM로 분석된 데이터의 정확도는 최대 100%, 최소 99.4%로 실제 광고와 분석된 데이터의 차이가 거의 발생하지 않았으며, OBBM을 이용한 브라우저 최적화를 실행하면, 작업시간이 약 68.37%가 감소한다. 결과적으로 OOPP는 직현재 직업정보 사이트의 구인 광고를 정확하게 분석하여 사용자가 분석한 결과를 웹페이지에서 신속하게 조회할 수 있다.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.277-288
• /
• 2002

Seven finite element models were constructed in mandible having single screw-type implant fixture connected to the premolar superstructure, in order to evaluate how the length, diameter and platform shape of a screw-type fixture influence the stress in the supporting tissue around fixtures. Each finite element model was varied in terms of length, diameter, and platform shape of the fixture. In each model, 250N of vertical load was placed on the central pit of an occlusal plane and 250N of oblique load placed on the buccal cusp. The stress distribution in the supporting tissue and the other components was analysed using 2-dimensional finite element analysis and the maximum von Mises stress in each reference area was compared. Under lateral loading, the stress was larger at the abutment/fixture interface, and in the crestal bone, compared to the stress pattern under vertical loading. The amount of stress at the superstructure was similar regardless of the length, diameter and platform shape of a fixture. Around the longer fixture, the stress was decreased at the bone crest and subjacent cancellous bone and increased in the cancellous bone area apical to the fixture. Around the wider fixture, the stress was decreased at the abutment/fixture interface, and the bone crest and increased in the cancellous bone area apical to the fixture. Around the fixture having wider platform, less stress was produced at the abutment/fixture interface and the upper part of the cortical bone, compared to the fixture having standard platform. In conclusion, the stress distribution of the supporting tissue was affected by length, diameter, and platform shape of a fixture, and the fixture which was larger in diameter and length could reduce the stress in the supporting tissues at the bone-fixture interface and bone crest area.

• 디지털콘텐츠학회 논문지
• /
• 제18권7호
• /
• pp.1341-1346
• /
• 2017

본 논문에서는 개개인의 복합적 속성과 요구를 반영한 통합된 개인 맞춤형 서비스와 지능정보기술을 기반으로 의료서비스 접근성을 향상시킬 수 있는 개방형 서비스플랫폼의 구축방안에 대하여 설계하였다. 먼저, 데이터 수집 및 저장단계는 데이터 추출, 변환, 로딩을 반복하며 신속하고 정확하게 처리한다. ETL 모듈로부터 생성된 데이터는 분산 파일 시스템에 저장한다. 데이터 분석단계는 스토리지에 저장된 과거 의료 데이터들을 기반으로 기계학습과 데이터 마이닝 분야에서 사용되고 있는 분석 알고리즘을 적용하여 다양한 패턴들을 생성한다. 데이터 처리단계에서는 데이터를 신속히 처리해야 하므로 보통 작업을 병렬 및 분산 처리하여 성능을 향상시킨다. 데이터 제공방식은 디바이스별 운영하는 플랫폼에 독립적으로 동작해야 하며, 데이터 전송 시 네트워크 부하가 적고, 다양한 형태의 서비스를 제공하기 위하여 Open API 형태로 제공한다.