• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.61-70
• /
• 2008

본 연구에서는 말뚝의 하중-수평변위 거동에 대한 해석 방법 중에서 지반공학적인 측면에서 널리 쓰이고 있는 하중전이함수법에 대해 고찰하였다. 다층지반에 관입되어 사질토에 근입된 대구경 현장타설말뚝의 실물 수평재하시험을 실시하여 계측결과를 분석하였고, 계측데이타의 분석을 통해 현장에 적용가능한 하중-변위을 제안하였다 현장재하시험결과와 유한차분해석 프로그램인 "LPILE"에 의한 기존에 제안된 하중전이함수식의 조합에 의한 해석결과를 대상으로 비교, 분석을 수행하였다. 계측데이타의 분석에 의해 하중-변위곡선을 여러 함수식으로 표현해본 결과, 지수형모델인 $y=ae^{bx}$ (여기서 y : 변위(mm), x : 하중(ton))가 가장 간단하고 적용성이 뛰어난 것으로 분석되었고 a값은대체로 1.3에, b값 은0.02에 근접한 경향을 보인다. 현장실측결과와 'LPILE'에 의한 하중전이함수식의 조합에 의한 해석결과를 비교, 분석한 결과 수평하중이 작을때에는 계산된 변위와 실측 변위가 거의 유사한 값을 보이다가 수평하중이 커짐에 따라 계산된 변위가 실측 변위보다 크게 나타나는 경향을 보였다. 하중전이함수의 조합인 Matlock-Reese의 방법과 Matlock-API 방법에 의한 결과를 비교해 보면 Matlock-Reese 의 방법이 수평변위가 상대적으로 크게 산정되었다.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.349-355
• /
• 2019

A grid-connected inverter with critical loads should be able to supply a stable voltage to critical loads at mode change and during clearing time while detecting unintentional islanding. This study proposes a mode transfer method for a grid-connected inverter with critical loads. The proposed method, which integrates the grid-connected and islanded mode control loops into one control block, provides an autonomous and seamless mode transfer from the current control to the voltage control. Therefore, the proposed scheme can supply a stable voltage to critical loads at mode change and during clearing time. Experimental results are provided to validate the proposed method.

• Advances in concrete construction
• /
• 제10권4호
• /
• pp.289-299
• /
• 2020

A reliability analysis of the axial compressive load bearing capacity of postfire reinforced concrete (RC) columns strengthened with carbon fiber reinforced polymer (CFRP) sheets was presented. A 3D finite element (FE) model was built for heat transfer analysis using software ABAQUS. Based on the temperature distribution obtained from the FE analysis, the residual axial compressive load bearing capacity of RC columns was worked out using the section method. Formulas for calculating the residual axial compressive load bearing capacity of the columns after fire exposure and the axial compressive load bearing capacity of postfire columns retrofitted with CFRP sheets were developed. Then the Monte Carlo method was used to analyze the reliability of the axial compressive load bearing capacity of the RC columns retrofitted with CFRP sheets using a code developed in MATLAB. The effects of fire exposure time, load ratio, number of CFRP layers, concrete cover thickness, and longitudinal reinforcement ratio on the reliability of the axial compressive load bearing capacity of the columns after fire were investigated. The results show that within 60 minutes of fire exposure time, the reliability index of the RC columns after retrofitting with two layers of CFRPs can meet the requirements of Chinese code GB 50068 (GB 2001) for safety level II. This method is effective and accurate for the reliability analysis of the axial load bearing capacity of postfire reinforced concrete columns retrofitted with CFRP.

• 대한전기학회논문지
• /
• 제34권4호
• /
• pp.153-153
• /
• 1985

A method of computer aided design (C.A.D.) is proposed to analize a load circuit of a high frequency induction heating. Various formulas are derived from the properity of the heating load, which is useful for the design of heating materials. A load circuit which is designed by the proposed C.A.D. is realized and tested. The experimental results show in good agreement with the theoritical analysies. Especially the result reveal that the power transfer efficiency increases as the Q and coupling coefficient of the work coil increase.

• 한국주조공학회지
• /
• 제10권6호
• /
• pp.495-502
• /
• 1990

A basic heat flow model has been developed to estimate the heat transfer coefficient at the casting/mold interface during squeeze casting. Based on the measured temperature profiles in squeeze casting of Al-4.5%Si alloy, heat transfer coefficients which vary with time were calculated by numerical method. The influences of the load and the amount of fraction solid on the heat transfer coefficient have also been studied. Using the calculated heat transfer coefficient two dimensional solidification analysis in the squeeze casting process was carried out by the finite difference method, and the results were in good agreement with the experiments. It may be concluded that heat flow analysis in the squeeze casting process with accurate heat transfer coefficient at the casting /mold interface is important for a proper design of cooling in die and finally for improving productivity and die life as well.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.334-341
• /
• 2019

This study proposes the control strategy for the seamless mode transfer of indirect current controlled parallel grid-connected inverters. Under the abnormal grid condition, the grid-connected inverter can convert the operation mode from grid-connected to stand-alone mode to supply power to the local load. For a seamless mode transfer, the time delay problems caused by the accumulated control variable error must be solved, and the indirect current control method has been applied as one of the solutions. In this study, the design of control parameters for the proportional-resonant-based triple-loop indirect current controller and the control strategy for the seamless mode transfer of parallel grid-connected inverters are described and analyzed. The validity of the proposed mode transfer method is verified by the PSiM simulation results.

• 한국지반공학회논문집
• /
• 제22권4호
• /
• pp.11-19
• /
• 2006

1990년대 이후로 양방향 재하시험(Bi-directional pile load test)은 기존 재하시험 방법에 대한 장점으로 인해 최근 여러 나라에서 그 사용이 증가하고 있다. 그러나 양방향재하시험은 두부재하시험과 상이한 재하기구를 따르므로 실제 구조물의 거동, 특히 말뚝 두부에서의 하중-변위 거동에 있어 실제와 다른 결과를 줄 우려가 있다. 따라서 본 논문에서는 동일한 형상과 지반조건을 갖는 두 본의 말뚝에 대해 한 본은 두부재하 방식으로, 한 본은 선단부 양방향 재하방식으로 정재하시험을 수행하였으며, 이 때 말뚝 깊이별로 변형률계를 부착하여 말뚝의 하중-전이 기구를 분석하였다. 변형률계 분석으로 구한 말뚝의 깊이별 하중 전이 함수의 모양은 시험방법에 따른 큰 차이를 보이지 않았으나, 양방향 재하시험을 이용하여 기존의 방법으로 추정한 말뚝두부 변위는 두부재하시험으로 구한 변위에 비해 사용하중하에서 1/2 미만인 것으로 나타났다. 양방향 재하시험 결과를 이용하여 보다 정확한 하중-변위곡선을 예측하기 위해 말뚝의 탄성압축량을 고려하는 간단한 방법을 제안하였다. 또한 양방향 재하시험시 변형률계 계측자료를 이용하여 두부재하시험 곡선과 거의 동일한 하중-변위 곡선을 예측할 수 있었다.

• 한국지반공학회논문집
• /
• 제21권8호
• /
• pp.5-12
• /
• 2005

축하중이 작용하는 말뚝에 대한 거동 해석 시 초기에는 여러 가정을 단순화하거나 또는 현장에서 많은 재하시험을 통해 안정성을 평가하는 것이 최선의 방법이었다. 그러나 최근 들어 컴퓨터의 발달로 축하중을 받는 말뚝의 거동을 보다 복잡하고 정교하게 해석할 수 있게 되었으며 이러한 방법들은 보다 현실적이고 정확한 결과를 산출 가능하게 하였다. 본 연구에서는 Coyle과 Reese(1966)가 제안한 하중전이법에 근거한 유한차분해석 프로그램을 개발하였다. 수치해석에 적용한 극한단위주면저항 $f_{max}$는 여러 제안자에 따라 다양한 방법으로 산정하였는데 이렇게 산정된 값들을 Vijayvergiya(1977) 그리고 Mosher 등(2000)의 t-z모델에 적용하여 수치해석을 수행하였다. 이러한 t-z 모델들을 적용하여 수치해석한 결과 주면저항 값은 실측치보다 다소 작게 산정되었지만 전체적으로 유사한 거동을 나타내었다. H-말뚝 타입 시 발생한 함몰부의 영향을 고려하기 위하여 부분폐색단면으로 수치해석을 수행한 결과 비교적 실측치에 근접한 결과를 나타내었다. 이것은 함몰부에 느슨한 모래가 충진되어 폐색이 제대로 되지 않은 상태를 비교적 잘 고려한 결과로 판단된다.

• 설비공학논문집
• /
• 제27권12호
• /
• pp.633-638
• /
• 2015

This study evaluates the capacity of night purging in office buildings to reduce the cooling load. RTS-SAREK is used to estimate the performance of night purging on the steady state. To overcome steady state RTS program limitations, we added unsteady heat transfer equations. When the ACH (Air Change per Hour) increases, the wall temperature decreases in both the steady and unsteady states. The unsteady heat transfer rate is different from the steady transfer rate, which validates the unsteady calculation. When ACH is low, the heat transfer rate increases continuously with time. When ACH becomes higher, the heat transfer rate increases and decreases with time. When ACH is quite high, there exists a large difference in the heat transfer rate between the steady and unsteady calculations, which emphasizes the importance of the unsteady calculation.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.575-598
• /
• 2013

The study presents the results of an experimental program concerning the shear force transfer between reinforced concrete (RC) jackets and existing columns with damages. In order to investigate the effectiveness of the repair method applied and the contribution of each shear transfer mechanism of the interface. It includes 22 concrete columns (core) (of 24,37MPa concrete strength) with square section (150mm side, 500 mm height and scale 1:2). Ten columns had initial construction damages and twelve were subjected to initial axial load. Sixteen columns have full jacketing at all four faces with 80mm thickness (of 31,7MPa concrete strength) and contain longitudinal bars (of 500MPa nominal strength) and closed stirrups spaced at 25mm, 50mm or 100mm (of 220MPa nominal strength). Fourteen of them contain dowels at the interface between old and new concrete. All columns were subjected to repeated (pseudo-seismic) axial compression with increasing deformation cycles up to failure with or without jacketing. Two load patterns were selected to examine the difference of the behavior of columns. The effects of the initial damages, of the reinforcement of the interface (dowels) and of the confinement generated by the stirrups are investigated through axial- deformation (slip) diagrams and the energy absorbed diagrams. The results indicate that the initial damages affect the total behavior of the column and the capacity of the interface to shear mechanisms and to slip: a) the maximum bearing load of old column is decreased affecting at the same time the loading capacity of the jacketed element, b) suitable repair of initially damaged specimens increases the capacity of the jacketed column to transfer load through the interface.