• International Journal of Contents
• /
• 제6권2호
• /
• pp.10-13
• /
• 2010

For applications that are grid enabled, the grid can offer a resource balancing effect by scheduling grid jobs on machines with low utilization. When jobs communicate with each other, the internet, or with storage resources, an advanced scheduler could schedule them to minimize communications traffic or minimize the distance of the communications. We propose an intelligent load distribution algorithm to minimize communications traffic and distance of the communications using genetic algorithm. The experiments show the proposed load redistribution algorithm performs efficiently in the variance of load in grid environments.

• 대한조선학회논문집
• /
• 제41권6호
• /
• pp.84-90
• /
• 2004

For the precise assessment of the effect of welding residual stresses on structural strength and fatigue crack growth behavior, new FE analysis algorithms for the estimation of residual stress relaxation due to external load and redistribution due to fatigue crack propagation were proposed in this paper. Initial welding residual stress field was obtained by thermal elasto-plastic analysis considering temperature dependent material properties, and the amount of residual stress relaxation and redistribution were assessed by subsequent elasto-plastic analysis In the analysis of fatigue crack propagation, the applied SIF(Stress Intensity Factor) range was evaluated by $\frac{1}{4}$-point displacement extrapolation method, and the effect of welding residual stresses on crack propagation was considered by introducing the effective SIF concept. The test results of crack propagations were compared with the predicted data obtained by the analysis.

• 한국공간구조학회논문집
• /
• 제11권1호
• /
• pp.57-66
• /
• 2011

중진 지역에 있는 RC 골조의 횡하중에 대한 설계에서 저층부에 있는 보와 기둥의 강도는 상층부의 강도보다 커야만 한다. 그러나 횡하중에 대한 보의 설계 모멘트를 골조의 수평방향뿐만 아니라 수직방향으로 재분배 시킬 수 있고 그 결과 모든 보의 강도를 같게 할 수 있다. 본 논문은 최대한 많은 층의 보 휨 강도를 동일하게 만들기 위한 수직방향 보 모멘트 재분배의 영향을 살펴보는데 있다. 2경간-6층 RC 골조를 수직방향 모멘트 재분배를 고려한 경우와 고려치 않은 경우로 각각 설계하고 이들의 내진성능을 정적 비선형 한계하중 해석법과 동적 비선형 시간이력 해석법을 이용하여 구하였다. 해석결과 수직방향으로 보의 모멘트를 재분배하면 재분배 한 크기만큼 증가된 연성도를 요구하지만, 이 추가적인 요구는 상세설계가 잘된 RC 부재의 연성도 능력보다 작다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.624-631
• /
• 2003

This paper presents a simple carrier symmetric method for the voltage balance of flying capacitors in FCMLI(flying capacitor multi-level inverter). To achieve the voltage balance of flying capacitors, the utilization of each carrier must be balanced during a half-cycle of the switching period such as PSPWM(Phase-Shifted PWM). However, the CRPWM(Carrier Redistribution PWM) method causes the fluctuation of flying capacitor voltages because the balanced utilization of carriers is not achieved. Moreover, it does not consider that the load current change has an influence on flying capacitor voltages by assuming that the current flows into the load. To overcome the drawbacks of CRPWM, it is modified by the technique that carriers of each band are disposed symmetrically at every fundamental period. Firstly, the CRPWM method is reviewed and the theory on voltage balance of flying capacitors is analyzed. The proposed method is introduced and is verified through the experiment result.

• Steel and Composite Structures
• /
• 제3권5호
• /
• pp.333-348
• /
• 2003

The behaviour of composite frame - shear wall systems with regard to creep and shrinkage with high beam stiffness has been largely unattended until recently since no procedure has been available. Recently an accurate procedure, termed the Consistent Procedure (CP), has been developed which is applicable for low as well as for high beam stiffness. In this paper, CP is adapted for a class of composite frame - shear wall systems comprising of steel columns and R.C. shear walls. Studies are reported for the composite systems with high as well as low beam stiffness. It is shown that considerable load redistribution occurs between the R.C. shear wall and the steel columns and additional moments occur in beams. The magnitude of the load redistribution and the additional moment in the beams depend on the stiffness of the beams. It is also shown that the effect of creep and shrinkage are greater for the composite frame - shear wall system than for the equivalent R.C. frame - shear wall system.

• 한국강구조학회 논문집
• /
• 제19권3호
• /
• pp.271-280
• /
• 2007

본 연구에서는 단재하경로 구조로 인식되는 2-거더교에서 한 개 거더의 손상 시 여유도를 평가하기 위한 실험적 연구를 수행하였다. 실험변수는 하부 수평브레이싱으로 하여 하부 수평브레이싱이 설치된 경우와 설치되지 않은 경우의 단경간 1/5 모형 시험체 2개를 제작하였다. 먼저 균열이 없는 정상상태 시험체에 대해서 탄성범위 내에서 재하실험을 수행하였으며, 이후 지간 중앙부의 한 개 거더에 인위적인 손상을 가한 후 종국상태에 이르기까지 재하 실험을 수행하였다. 실험으로부터 정상상태의 교량에서도 수평브레이싱은 하중 재분배 역할을 수행하였으며, 한 개 거더에 심각한 손상이 발생한 경우에는 가로보와 바닥판이 비균열 거더 측으로 하중 재분배 기능을 일부 수행하였으나, 특히 하부 수평브레이싱은 2-거더교의 손상 시 여유도 향상에 매우 중요한 기능을 하는 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.297-302
• /
• 2000

This paper presents the effect of diaphragm spacing ratio(depth to span) on behavior and capacity of composite steel-concrete structures of sandwich system. Numerical analysis has been performed variety diaphragm ratio, behavior and load condition. As a results of this study, in case of shear behavior and concentrated load, the capacity of structure such as yielding and ultimate load improve according to diaphragm ratio because of concrete confining effect by steel plate and stress redistribution by diaphragm. But in case of bending behavior or uniform load, it proved that diaphragm ratio don't influence on behavior and capacity of composite structures of sandwich system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1358-1365
• /
• 2010

A case study deals with Squeezing behavior under tunneling. Squeezing stands for large time-dependent convergence during tunnel excavation. Squeezing can occur in both rock and soil as long as the particular combination of induced stresses and material properties pushes some zone around the tunnel beyond the limiting shear stress at which creep starts. Under squeezing rock conditions, If the support installation is delayed the rock mass moves into the tunnel and a stress redistribution takes place around it. On the contrary, if deformation is restrained, squeezing will lead to long-term load build-up of rock support. This paper shows analysis case mutually with monitoring and numerical analysis result of squeezing behavior of Pinglin tunnel in Taiwan.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.83-89
• /
• 2001

This paper provides a short description of the COMPASS-model which is a concept for the simulation of multiway systems. The focus of the COMPASS-model is to offer an opportunity to investigate the effects of redistribution strategies on logistic and monetary values in a system of returnable transport items (RTI). The modeling concept consists of five modules: topology, system load, distribution, redistribution, cost. It includes the integration of highly sophisticated evolutionary algorithms for the optimal solving of complex capacitated vehicle routing problems (CVRP) which are typical for RTI-systems. The results of first experiments with a COMPASS-based prototype are repeated. They reveal some basic regularities in RTI-systems.

• 산업기술연구
• /
• 제15권
• /
• pp.235-244
• /
• 1995

In this paper, we propose a bulk-load algorithm for $B^+-trees$, the most widely used index structures in database systems. The main characteristic of our algorithm is to simultaneously process all the keys to be placed on each $B^+-trees$ page when accessing the page. This avoids the overhead for accessing the same page multiple times, which results from applying the $B^+-trees$ insertion algorithm repeatedly. For performance evaluation, we analyze our algorithm in terms of the number of disk accesses. The results show that the number of disk accesses excluding those in the redistribution process in identical to the number of $B^+-trees$ pages. Considering that the redistribution process is an unavoidable preprocessing step for bulk-loading, our algorithm requires just one disk access per $B^+-trees$ page, and therefore turns out to be optimal. We also present performance tendancy according to the changes of parameter values via simulation.