• 한국정보전자통신기술학회논문지
• /
• 제5권3호
• /
• pp.117-126
• /
• 2012

논문에서는 극저속 영역 및 저속 영역에서 안정적이고 동특성이 우수한 벡터제어 시스템을 구성하여, 축소차원 상태관측기를 이용한 순시속도 관측기와 극저속 제어에 관한 방법을 제안하였다. 본 시스템에서 제안된 관측기는 축소차원 상태관측기를 부하토크 추정에 적용하여 속도추정에 이용함으로서 시스템구성을 간단히 구현하면서도 극저속 영역에서 정확한 순시속도 추정이 가능하였다. 또한, 시스템 잡음에 의한 영향을 줄이고, 관측기의 극을 변화시키는 일 없이 부하외란이나 모델화 오차, 측정 잡음 등에 강인한 유도전동기 속도제어 시스템을 제시하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.290-292
• /
• 1995

In this paper, the regenerative braking control system for 4 WD Electric Vehicle (EV) is proposed. Many studies on efficient drive of EV are being done to prolong the one charge distance. By using the regenerative braking (REGEN), the resulting EV system has following advantages : a) battery is recharged with the mechanical energy of EV, b) the running load can be reduced, and consequently the efficiency can be increased. The problem of REGEN that the power acceptance ability of battery is limited can be solved by controlling regenerative braking torque. The proposed control system has following characteristics. : a) It controls regenerative power by varying mechanical braking torque. b) It controls mechanical braking torque using load torque observer. c) It controls the regenerative braking torque independently. The control scheme and simulation results are presented for the experimental car.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3581-3586
• /
• 2009

이 논문은 피드포워드 왜란상쇄 관측기를 이용하여 유도전동기의 강인한 제어를 얻을 수 있었다. 전통적인 비례적분 제어기의 속도응답 특징은 부하 토크 요소의 변이에 영향을 받는다. 제안한 시스템에서 속도제어 특성은 부하토크 외란에 영향을 받지 않는 피드포워드 제어를 사용하였다. 벡터제어를 위한 높은 속도의 계산과 처리를 위해 TMS320C31 디지털 프로세서를 사용하였다. 제안한 제어 방법의 타당성을 입증하기 위해 시뮬레이션과 실험을 통해 확인하였다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권2호
• /
• pp.113-118
• /
• 2010

This paper proposed an ECAM (Electronic cam) control system which has simple and general structure. The proposed cam controller adopted the linear and polynomial curve-fitting method to generates a smooth cam profile curve function. Smooth motion trajectory of master actuator guarantees the good performance of slave motion and has an important effect on the interpolation quality of ECAM. The auto-tuning PID velocity controller was applied to overcome the uncertainties in ECAM, and the gains of the controller are updated continuously to ensure the consistency of system performance under varying working conditions. The robustness of system against the varying load torque disturbances and noises is guaranteed by using the load torque disturbance observer to suppress the disturbance on master actuator. The velocity compensator was applied to compensate the degradation of performance of slave motion caused from the varying driving speed of master motion. The stability and validity of the proposed ECAM control system was verified by simulation results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.185-188
• /
• 1999

An estimation algorithm for vehicle driving load has been proposed in this paper. Driving load is an important factor in a vehicle's longitudinal motion control. An approach using an observer is introduced to estimate driving load based on inexpensive RPM sensors currently being used in production vehicles. Also, a torque estimation technique using nonlinear characteristic functions has been incorporated in this estimation algorithm. Using a nonlinear full vehicle simulation model, we study the effect of the driving load on longitudinal vehicle motion, and the performance of the estimation algorithm has been evaluated. The proposed estimation algorithm has good performance and robustness over uncertainties in the system parameters. An accurate estimate of the driving load can be very helpful in the development of advance vehicle control systems such as intelligent cruise control systems, CW/CA systems and smooth shift control systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.420-425
• /
• 1996

In this paper a robust speed controller for an induction motor is proposed. The speed controller consists or a fuzzy sliding adaptive controller(FSAC) and a sliding mode torque observer(SMTO). FSAC removes the problem or oscillations caused by discontinuous inputs of the sliding mode controller. The controller also provides robust characteristics against parameter and sampling time variations. Although, however, the performance of FSAC is better than PI controller and fuzzy controller in robustness, it generates the problem of slow response time. To alleviate this problem, a compensator, which performs feedforward control using torque signals produced by SMTO, is added. The simulation and hardware implementation results show that the proposed system is robust to the load disturbance, parameter variations, and measurement noises.

• 조명전기설비학회논문지
• /
• 제19권1호
• /
• pp.70-79
• /
• 2005

본 논문은 축소차원 상태방정식을 사용한 전차원 관측기를 이용하여 저속도 영역에서의 운전 성능 개선방법을 제안하였다. 축소차원 상태방정식을 사용한 전차원 관측기는 간단한 모터속도 및 외란토크 관측기이다. 제안한 알고리즘은 약 1.9[rpm]의 저속도에서 매우 안정적인 결과를 보였다. 모터구동 시스템에서 외란토크는 저속도 영역에서 속도제어 성능을 저하시킨다. 제안한 알고리즘은 모터속도와 외란토크를 모두 추정한다. 추정된 외란 토크는 속도제어기의 출력에 전향보상 값으로 사용되며, 그 결과 저속도 영역(1.9rpm)에서 부하토크 응답특성이 향상된 것을 확인하였다.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.38-46
• /
• 2015

This paper propose a variable parameter estimations for variable over current load of five-phase squirrel-cage induction motor(IM) to servo control system. In order to high performance control of AC motor using a field oriented control(FOC) and direct torque control(DTC) algorithm, there are required precise motor parameters for slip calculation, flux observer, controller gain, torque command of current components, rotor position, speed estimation, and so on. We are suggest a analyzed estimation results of the motor parameters that developing five-phase squirrel-cage IM have a stator of concentrated winding for experimental within variable over current load at rated input frequency. There are results of stator winding measurement, no-load test, locked-rotor test, variable over current load test, and estimated parameters of equivalent circuits using manufactured experimental apparatus by IEEE Standard Test Procedure for Polyphase Induction Motors and Generators 112-2004.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.148-151
• /
• 1991

This paper describes the vector control system estimates rotor speed based on MRAS(Model Reference Adaptive Control) and this estimate is used for speed feedback control. The stability of speed estimator is proved on the basis of hyperstability theory. In order to improve the performance of speed control, the load torque is estimated by load torque observer and speed controller compensates this estimate value. Thus the robust vector control system against load torque disturbance is constructed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.391-393
• /
• 2007

The rotor speed and flux information is most important in the vector control. The accuracy of flux observers for induction machine inherently depends on parameter sensitivity. The control strategy is using online flux observer for flux estimation. In the proposed system, the speed control characteristics using a online flux observer control isn't affected by a load torque parameter disturbance. Simulation results are presented to prove the effectiveness of the adaptive sliding mode controller for the drive variable load of induction motor.