• 제목/요약/키워드: load limit curves

검색결과 46건 처리시간 0.02초

Cyclic test for solid steel reinforced concrete frames with special-shaped columns

  • Liu, Zu Q.;Xue, Jian Y.;Zhao, Hong T.;Gao, Liang
    • Earthquakes and Structures
    • /
    • 제7권3호
    • /
    • pp.317-331
    • /
    • 2014
  • An experimental study was performed to investigate the seismic performance of solid steel reinforced concrete (SRC) frames with special-shaped columns that are composed of SRC special-shaped columns and reinforced concrete beams. For this purpose, two models of two-bay and three-story frame, including an edge frame and a middle frame, were designed and tested. The failure process and patterns were observed. The mechanical behaviors such as load-displacement hysteretic loops and skeleton curves, load bearing capacity, drift ratio, ductility, energy dissipation and stiffness degradation of test specimens were analyzed. Test results show that the failure mechanism of solid SRC frame with special-shaped columns is the beam-hinged mechanism, satisfying the seismic design principle of "strong column and weak beam". The hysteretic loops are plump, the ductility is good and the capacity of energy dissipation is strong, indicating that the solid SRC frame with special-shaped columns has excellent seismic performance, which is better than that of the lattice SRC frame with special-shaped columns. The ultimate elastic-plastic drift ratio is larger than the limit value specified by seismic code, showing the high capacity of collapse resistance. Compared with the edge frame, the middle frame has higher carrying capacity and stronger energy dissipation, but the ductility and speed of stiffness degradation are similar. All these can be helpful to the designation of solid SRC frame with special-shaped columns.

상태의존성 유한요소해석 및 CPT결과를 적용한 상재하중하의 얕은 기초의 지지력 결정 (Determination of CPT-based Bearing Capacity of Footings Under Surcharge Using State-dependent Finite Element Analysis)

  • 이준환;김대호;박동규
    • 한국지반공학회논문집
    • /
    • 제21권7호
    • /
    • pp.55-62
    • /
    • 2005
  • 기초지반의 거동은 선형탄성이 아니며, 완전소성상태도 아닌 비선형 응력-변형률의 거동을 보이며, 지반 물성은 하중조건 및 상태에 따라 상이한 값을 나타내게 된다. 기존 기초 지지력 산정방법의 대부분은 기초지반 특성치의 대표값을 적용하고 있어, 응력상태에 따른 지반특성의 변화를 고려하지 못하고 있다. 본 연구에서는 상재하중을 받는 얕은 기초를 대상으로 지반의 상태의존적 변화특성을 고려하며 현장시험결과인 콘지지력값들 적용할 수 있는 얕은 기초의 지지력 산정에 대한 연구를 수행하였다. 이를 위해 상태의존적 응력-변형률 거동 모델을 적용한 비선형 유한요소해석과 콘지지력해석을 수행하였으며, 이를 토대로 콘지지력의 함수로 표시되는 얕은 기초의 지지력 산정방법을 제안하였다. 보다 일반화된 결과를 도출하기 위해 다양한 범위의 상대밀도, 기초의 근입심도 및 크기 등을 고려하여 유한요소해석을 수행하였으며, 이를 통해 얻어진 하중-침하량 곡선을 토대로 콘지지력 값으로 정규화된 얕은 기초의 지지력값은 도출하였다. 상재하중이 적용된 지반에서 기초의 근입심도에 따른 정규화 극한 지지력의 차이는 비교적 작은 것으로 나타났으나, 상대밀도에 의한 차이는 큰 것으로 나타났으며, 상대밀도가 증가할수록 얕은 기초의 정규화 지지력은 감소하는 것으로 나타났다.

태풍 내습 시 3-second gust를 이용한 피해액 산정 (An Estimation of Amount of Damage Using the 3-second Gust When the Typhoon Attack)

  • 정우식;박종길;최효진
    • 한국환경과학회지
    • /
    • 제19권3호
    • /
    • pp.353-363
    • /
    • 2010
  • The most efficient measures to reduce damage from natural disasters include activities which prevent disasters in advance, decrease possibility of disasters and minimize the scale of damage. Therefore, developing of the risk assessment model is very important to reduce the natural disaster damage. This study estimated a typhoon damage which is the biggest damage scale among increased natural disasters in Korea along with climate change. The results of 3-second gust at the height of 10m level from the typhoon 'Maemi' which did considerable damage to Korean in 2003, using the wind data at the height of 700 hPa. September 12th 09 LST~13th 12 LST period by the time a typhoon Maemi approached to the Korean peninsula. This study estimate damage amount using 'Fragility curve' which is the damage probability curve about a certain wind speed of the each building component factors based on wind load estimation results by using 3-second gust. But the fragility curve is not to Korea. Therefore, we use the fragility curves to FPHLM(FDFS, 2005). The result of houses damage amount is about 11 trillion 5 million won. This values are limit the 1-story detached dwelling, $62.51\sim95.56\;m^2$ of total area. Therefore, this process is possible application to other type houses.

인공신경망 기반의 응답면 기법을 이용한 사면의 지진에 대한 취약도 곡선 작성 (Development of Seismic Fragility Curves for Slopes Using ANN-based Response Surface)

  • 박노석;조성은
    • 한국지반공학회논문집
    • /
    • 제32권11호
    • /
    • pp.31-42
    • /
    • 2016
  • 지진에 대한 사면안정 해석은 지진에 의한 관성력을 정적하중으로 고려하는 유사정적해석을 널리 사용하고 있다. 사면과 같은 지반 구조물은 지반정수의 불확실성이 포함되어 있어 확률론적 해석을 이용하여 지반정수의 불확실성을 고려해야 한다. 본 연구에서는 지반의 불확실성을 고려한 확률론적 사면안정해석을 수행하였으며, 구조물이 임의 수준의 지반 운동을 받을 때 파괴상태에 도달하는 확률을 그래프로 나타낸 취약도 곡선을 작성하였다. 유사정적해석으로 확률론적 사면안정해석을 수행하기 위해 Monte Carlo Simulation(MCS)을 시행하였다. MCS의 소요 시간을 단축하기 위하여 인공신경망 기반의 응답면 기법을 이용해 파괴확률을 산출하여 수평지진계수별 취약도 곡선을 작성하는 방법을 제시하였다. 인공신경망을 이용하여 작성한 취약도 곡선을 MCS의 결과와 비교해 본 결과 상당한 시간 절약에 비해 유사한 결과를 얻을 수 있었다.

비점착성 사면에 인접한 대상기초의 지지력 (Bearing Capacity of Strip Footing Adjacent on Cohesionless Slopes)

  • 유남재;김영길;전연종
    • 한국지반공학회지:지반
    • /
    • 제13권4호
    • /
    • pp.37-54
    • /
    • 1997
  • 본 논문은 비점착성 사질토 성토 사면에 인접한 대상기초의 극한지지력 및 파괴메카니즘에 관 한 연구로서 지반의 상대밀도, 기초 폭, 사면 경사각, 사면 정부로 부터 기초까지의 거리가 기초 의 하중침하특성과 극한지지력, 경사지반의 파괴메카니즘에 미치는 영향을 조사하기 위하여 비 점착성 사질토 모형사면에서 2차원 평면변형 실험을 수행하였다. 모형실험에서는 주문진 표준사를 사용하여 상대밀도가 45%와 70%로 조성된 1:1.5및 1:2의 모형사면을 성형하고 폭이 4, 7, 10, 12cm의 대상 강성 모형기초를 사용하였다. 또한 기초의 재하위치는 사면 정부로 부터 기초까지의 거리를 기초 폭으로 나눈 값 즉, 0, 0.5, 1, 2, 3, 4, 5로 변화시키면서 실험을 수행하였다. 이와같이 사면 정부로 기초의 재하위치를 점진적으로 변화시키므로써 관찰된 활동선 형성의 파괴메카니즘을 기존의 해석 방법들과 비교 분석하였으며, 실험을 수행하여 측정한 극한지지력을 한계평형법과 극한해석법 그리고 실험결과에 의한 경험식과 비교하여 지반의 상대밀도, 기초의 폭 및 기초 재하위치의 변화가 극한지지력 및 하중친하 특성, 파괴메카니즘에 미치는 영향을 조사하였다.

  • PDF

강섬유 보강 초고강도 콘크리트의 인장 특성 실험 연구 (An Experimental Study on Tensile Properties of Steel Fiber-Reinforced Ultra High Strength Concrete)

  • 양인환;박지훈;이재호
    • 한국건설순환자원학회논문집
    • /
    • 제7권3호
    • /
    • pp.279-286
    • /
    • 2019
  • 본 연구에서는 기준압축강도 180MPa의 강섬유 보강 초고강도 콘크리트(UHSC)의 인장 특성에 관한 실험 연구를 수행하였다. 부피비 1%의 강섬유를 혼입하여 직접인장강도 시편과 3점 하중재하 휨 실험을 위한 프리즘 시편을 제작하였다. 제작된 시편은 균열 유도를 위하여 시편 중앙에 노치를 설정하였으며, 각 평가방법에 따라 실험을 수행하였다. 우선, 콘크리트의 균열 후 거동 특성을 파악하기 위하여 직접인장강도 실험을 수행하여 응력-변형률 곡선을 분석하였으며, 3점 하중재하 휨 실험을 통하여 하중-CMOD 곡선을 얻고, 역해석을 수행하여 응력-변형률 곡선을 분석하였다. 직접인장강도 실험과 3점 하중재하 휨 실험의 인장거동 특성은 유사하게 나타났다. 또한, SC 구조설계지침에서 제시하고 있는 인장응력-변형률 곡선 모델링을 수행하고, 측정값과 예측값의 비교분석을 수행하였다. 재료감소계수가 1.0일 때, 변형률이 0.02일 때까지 예측값은 측정값과 유사하게 나타나지만, 재료감소계수가 0.8일 때, 예측값은 측정값의 최소값에 근접한다. 또한, 변형률이 0.02를 초과하는 구간에서는 SC 구조설계지침에 의한 예측값이 측정값을 과소평가한다.