• 대한조선학회지
• /
• 제22권1호
• /
• pp.1-8
• /
• 1985

The buckling characteristics of cylindrical shells with a circular hole, under axially compressed loads, have been analyzed and the results have been compared with existed experimental results. Deflection function with decay factor is assumed, and stress distribution around a circular hole in tensioned infinite plate is used for formulating buckling energy function. Applying Rayleigh Ritz procedure to this energy function, characteristic equation of eigenvalue problem is determined. Buckling load is defined by the minimum value of eigenvalues calculated according to several decay factors, and as the radius ratios of a circular hole (a/R) and shell thickness ratios (R/t) are varied, the reducing characteristics of buckling load are studied. As a result, buckling loads are reduced by about 50% according to some radius ratios ($a/R{\geq}0.15$) of circular hole and are not nearly affected by shell thickness ratio(R/t).

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.43-47
• /
• 2004

Most of LV customer has been composed the 3-phase four wire system distribution system which is supplying simultaneously at the 1-phase & 3-phase load. In this system, the composition of the power apparatus system is simple rather than conventional separation mode of the 1-phase & 3-phase, But due to uneven load unbalance or unclean power quality, various kinds such as do-rating or power losses become an issue. In this paper, we measured and analyzed voltage and current waveform in the field, compared with internationally allowable voltage unbalance limits.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권2호
• /
• pp.67-74
• /
• 2019

본 논문에서는 노후된 중소규모 RC슬래브 교량에 대한 응답계수를 분석하였다. 이 응답계수는 진동수 기반 교량의 내하력 예측 모델에서 중요한 변수이며, 정적 및 동적 응답계수로 구성되어 있다. 정적 및 동적 응답계수는 교량의 현재와 이전(또는 설계) 상태의 진동수 변화와 충격 계수 변화에 따라 각각 결정된다. 여기서 충격계수 변화는 충격계수 응답스펙트럼에서 교량의 고유진동수에 따라 산출된다. 본 연구에서 고려한 총 4개의 대상교량은 지간길이가 12 m이고 시공 후 30년 이상 된 RC슬래브 노후 교량이다. 진동수 분석을 위해 덤프 트럭을 이용한 현장 동적 재하시험과 설계기반 FE모델을 이용한 고유치 해석을 통해 교량의 현재 및 설계 상태의 고유 진동수를 각각 도출하였다. 충격계수 응답스펙트럼 개발에 있어서 좀 더 현실적인 조건을 반영하기 위해 3축이동하중과 단순지지 및 양단고정 조건을 고려하였다. 분석 결과 응답계수는 0.21에서 0.91까지 광범위하게 분포하였고, 정적 응답계수가 총 응답계수 결과에 크게 기여한 반면 동적 응답계수는 결과에 작은 영향을 미쳤다. 1축 이동하중과 단순지지 조건에서의 응답계수와 비교해 보았을 때 최대 오차는 약 3%미만으로 매우 작게 나타났다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.419-424
• /
• 2012

This paper discusses the state-of-the-art techniques in real-time state estimation for the Smart Microgrids. The most popular method used in traditional power system state estimation is a Weighted Least Square(WLS) algorithm which is based on Maximum Likelihood(ML) estimation under the assumption of static system state being a set of deterministic variables. In this paper, we present a survey of dynamic state estimation techniques for Smart Microgrids based on Belief Propagation (BP) when the system state is a set of stochastic variables. The measurements are often too sparse to fulfill the system observability in the distribution network of microgrids. The BP algorithm calculates posterior distributions of the state variables for real-time sparse measurements. Smart Microgrids are modeled as a factor graph suitable for characterizing the linear correlations among the state variables. The state estimator performs the BP algorithm on the factor graph based the stochastic model. The factor graph model can integrate new models for solar and wind correlation. It provides the Smart Microgrids with a way of integrating the distributed renewable energy generation. Our study on Smart Microgrid state estimation can be extended to the estimation of unbalanced three phase distribution systems as well as the optimal placement of smart meters.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2421-2428
• /
• 2002

In this study, the failure probability of the degraded LP turbine blade steel was performed using the Monte Carlo simulation to apply variation of applied stress and strength. For this purpose, applied stress under the service condition of steady state was obtained by theoretical stress analysis and the maximum Von-Mises stress was 219MPa. The fatigue strength under rotating-bending load was evaluated by the staircase method. Furthermore, 3-parameter Weibull distribution was found to be most appropriate among assumed distributions when the probabilistic distributions of tensile and fatigue strength were determined by the proposed analysis. The failure probability with various loading conditions was derived from the strength-stress interference model and the characteristic factor of safety was also estimated.

• 조명전기설비학회논문지
• /
• 제24권4호
• /
• pp.43-49
• /
• 2010

콘덴서는 유도성 부하의 늦은 역률 보상으로도 사용되며, 비선형 부하에서 발생하는 고조파를 저감하기 위해 리액터에 직렬로 연결하여 사용되기도 한다. 전압, 전류의 증가와 열의 발생은 콘덴서 수명에 많은 영향을 준다. 전압이 증가할 경우 전류가 증가하고, 주파수의 증가도 전류의 증가로 이어지기 때문에 전압과 주파수의 증가는 바로 열의 증가로 콘덴서 절연에 스트레스로 작용하여 고장의 원인을 제공할 수 있다. 본 연구에서는 전압의 크기와 주파수를 변화시킬 경우 콘덴서에서 발생하는 열의 분포도를 열화상 카메라로 측정하였다. 측정결과 전압과 주파수의 증가는 높은 열을 발생시켜 콘덴서의 수명을 단축시키는 요소로 작용함을 확인할 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권3호
• /
• pp.129-134
• /
• 2004

The Available Transfer Capability (ATC) is defined as the measure of the transfer capability remaining in the physical transmission network for further commercial activity above already committed uses. The ATC determination s related with Total Transfer Capability (TTC) and two reliability margins-Transmission Reliability Capability (TRM) and Capacity Benefit Margin(CBM) The TRM is the component of ATC that accounts for uncertainties and safety margins. Also the TRM is the amount of transmission capability necessary to ensure that the interconnected network is secure under a reasonable range of uncertainties in system conditions. The CBM is the translation of generator capacity reserve margin determined by the Load Serving Entities. This paper describes a method for determining the TTC and TRM to calculate the ATC in the Bulk power system (HL II). TTC and TRM are calculated using Power Transfer Distribution Factor (PTDF). PTDF is implemented to find generation quantifies without violating system security and to identify the most limiting facilities in determining the network’s TTC. Reactive power is also considered to more accurate TTC calculation. TRM is calculated by alternative cases. CBM is calculated by LOLE. This paper compares ATC and TRM using suggested PTDF with using CPF. The method is illustrated using the IEEE 24 bus RTS (MRTS) in case study.

• 한국생산제조학회지
• /
• 제6권2호
• /
• pp.42-48
• /
• 1997

Drive systems are composed of spiral bevel gear, axle and bearings. In this paper, drive systems and the part of them are analyzed and a correlation of the factor that shows the geometry of spiral bevel gear is evaluated. The Weibull distribution of probability for survival, which caused by the load of bearings and gear teeth, would be calculated, and the life and reliability with equivalent function could be measured more specifically. The reliability methods are applied as a probability of which the gear drive systems are satisfiably operated.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.355-369
• /
• 2004

This paper presents a study of four finite element techniques that can be used to model slabon-beam highway bridges. The feasibility and correctness of each modeling technique are examined by applying them to a prestressed concrete I-beam bridge and a prestressed concrete box-beam bridge. Other issues related to bridge modeling such as torsional constant, support conditions, and quality control check are studied in detail and discussed in the paper. It is found that, under truck loading, the bending stress distribution in a beam section depends on the modeling technique being utilized. It is observed that the behavior of the bridge superstructure can be better represented when accounting for composite behavior between the supporting beams and slab.

• Computers and Concrete
• /
• 제7권5호
• /
• pp.437-453
• /
• 2010

CFRP has been widely used for strengthening reinforced concrete members in last decade. The strain transfer mechanism from concrete face to CFRP is a key factor for rigidity, ductility, energy dissipation and failure modes of concrete members. For these reasons, determination of the effective CFRP bonding length is the most crucial step to achieve effective and economical strengthening. In this paper, generalizations are made on effective bonding length by increasing the amount of test data. For this purpose, ANSYS software is employed, and an experimentally verified nonlinear finite element model is prepared. Special contact elements are utilized along the concrete-CFRP strip interface for investigating stress distribution, load-displacement behavior, and effective bonding length. Then results are compared with the experimental results. The finite element model found consistent results with the experimental findings.