• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.472-478
• /
• 1989

본 연구에서는 FRP의 파괴인성평가를 위한 기초적인 자료를 얻기 위하여 FRP 중에서도 널리 사용되고 있는 SMC재를 준비하고 3점 굽힘시험을 실시하여 노치선단에서의 손상거동 및 균열진전저항유선으로부터 안정파괴개시점을 검토하였다.

• 한국공간구조학회논문집
• /
• 제6권3호
• /
• pp.87-92
• /
• 2006

This paper is a study on the experiment and elasto-plastic discrete limit analysis of reinforced concrete circular cylindrical shell by the rigid-bodies spring model. In the rigid bodies-spring model, each collapsed part or piece of structures at the limiting state of loading is assumed to behave like rigid bodies. The present author propose new discrete elements for elasto-plastic analysis of cylindrical shell structures, that is, a rectangular-shaped cylindrical element and a rhombus-shaped cylindrical element for the improvement and expansion of this rigid-bodies spring model. In this study, it is proposed how this rigid element-bodies spring model can be applied to the elasto-plastic discrete limit analysis of cylindrical shell structures. Some numerical results of elasto-plastic discrete limit analysis and experimental results such as the curve of load-displacement and the yielding and fracturing pattern of circular cylindrical shell under horizontal load are shown.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1112-1119
• /
• 1999

Fracture resistance(J-R) curves, which are used for the elastic-plastic fracture mechanics analyses, are known to be dependent on the cyclic loading history. The objective of this paper is to study the effect of reverse cyclic loading on J-R curves in CT specimens. The effect of two parameters was observed on the J-R curves during the reverse cyclic loading. One was the minimum-to-maximum load ratio(R) and the other was the incremental plastic displacement(${\delta}_{cycle}/{\delta}_i$), which is related to the amount of crack growth that occurs in a cycle. Fracture resistance test on CT specimens with varying load ratio and incremental plastic displacement were performed. For the SA 516 Gr. 70 steel, the results showed that the J-R curves were decreased with decreasing the load ratio and the incremental plastic displacement. When the load ratio was set to -1, the results of the J-R curves and the $J_i$ value were about $40{\sim}50$ percent of those for the monotonic loading condition. Also on condition that the incremental plastic displacement reached 1/40, the J-R curves and the $J_i$ value were about $50{\sim}60$ percent of those for the incremental plastic displacement of 1/10.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.57-64
• /
• 2005

Since the allowable bearing capacities of piles in weathered/fractured rock are mainly governed by settlement, the load-displacement behavior of the rock socketed pile should be well known. To predict pile head settlement at the design stage, the exact understanding of the load-transfer mechanisms is essential. Therefore, in this research, the load-transfer mechanisms of drilled shaft socketed into weathered rock was investigated. For that, 5 cast-in-place concrete piles with diameters of 1,000 mm were socketed into weathered gneiss. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. A comprehensive field/laboratory testing program on weathered rock at the field test sites was also performed to describe the in situ rock mass conditions quantitatively. And then, the effect of rock mass condition on the load transfer mechanism was investigated. The side shear resistance of the pile in moderately weathered rock reached to yielding point at a few millimeter displacements, and after that, the rate of resistance increment dramatically decreased. However, that in the highly /completely weathered rock did not show the obvious yielding point, and gradually increased showing the hyperbolic pattern until with the relatively high displacement (>10 mm). The end bearing-displacement curves showed linear increase at least until with the base displacement of approximately 10 mm, regardless rock mass conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.357-367
• /
• 2010

In this study, several design and construction cases of the pile bent system for bridges were introduced. The lateral displacement of the pile bent system is larger than the displacement of pile cap system, due to the smaller bending stiffness and the longer unsupported length. So, the analysis of the lateral pile displacement is main factor for the design of pile bent system and superstructure. For the accurate estimation of the pile displacement, an iterative analysis method was developed. The superstructure was analyzed regarding the pile foundation as $6{\times}6$ spring and the substructure was analysed using non-linear load transfer curves (p-y, t-z, q-z curve). And, to verify this analysis method, the estimated displacements are compared with the results of lateral load test. This analysis method is expected to be a viable alternative approach for the design of bridge foundation hereafter.

• Structural Engineering and Mechanics
• /
• 제55권4호
• /
• pp.839-856
• /
• 2015

A multi-contact tooth meshing model for helical gear pairs considering bearing and shaft deformations is proposed. First, to easily incorporate into the system model, the complicated Harris' bearing force-displacement relationship is simplified applying a linear least square curve fit. Then, effects of shaft and bearing flexibilities on the helical gear meshing behavior are implemented through transformation matrices which contain the helical gear orientation and spatial displacement under loads. Finally, true contact lines between conjugated teeth are approximated applying a modified meshing equation that includes the influence of tooth flank displacement on the tooth contact induced by shaft and bearing displacements. Based on the model, the bearing's force-displacement relation is examined, and the effects of shaft deformation and external load on the multi-contact tooth mesh load distribution are also analyzed. The advantage of this work is, unlike previous works to search true contact lines through time-consuming iterative strategy, to determine true contact lines between conjugated teeth directly with presentation of deformations of bearings and shafts.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.60-65
• /
• 2006

The present paper provides experimental J estimation equation for the circumferential through-wall cracked pipe under four-point bending, based on the load-crack opening displacement (COD) record. Based on the limit analysis and the kinematically admissible rigid-body rotation field, the plastic ${\eta}$-factor for the load-COD record is derived and is compared with that for the load-load line displacement record. Comparison with the J results from detailed elastic-plastic finite element (FE) analysis shows that the proposed method based on the load-COD record provides reliable J estimates even for shallow cracks, whereas the conventional approach based on the load-load line displacement record gives erroneous results for shallow cracks. Thus, the proposed J estimation method could be recommended for testing the circumferential through-wall cracked pipe, particularly with shallow cracks.

• 대한기계학회논문집
• /
• 제14권1호
• /
• pp.79-86
• /
• 1990

본 연구에서는 균열 길이의 별도 측정없이, 하중변위 곡선에서 직접 $J_{IC}$를 결정하는 방법을 제안하고 그 타당성을 조사한다. 또한 키이 곡선(key curve)을 이용하여 $J_{IC}$를 좀더 간단하게 구하는 방법에 대해서도 알아본다. 위의 방법으 로 결정된 $J_{IC}$의 값은 ASTM에 의해 제안된 R-곡선 방법으로 고한 $J_{IC}$의 값 과 비교된다. 본 연구의 타당성을 조사하기 위하여 기계 구조용합금강인 SCM4를 사 용한 파괴 실험을 수행한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.101-106
• /
• 2003

In order to investigate the mechanical behavior of newly developed materials, the evaluation of mechanical properties using small-size specimen is essential. For those purposes, an instrumented impact testing apparatus, which provides the load-displacement curve under impact loading without oscillations, was devised. To develop the test procedure with the setup, the impact behaviors of various kinds of structural materials such as S45C, SCM4, Ti alloys (Ti-6V-4Al) and Zr-based bulk amorphous metal, were investigated through the instrumented Charpy V-notch impact tests. The calibrations of the dynamic load and displacement that was calculated based on the Newton' second law were carried out through the quasi-static load test and the comparison of a directly measured value using a laser displacement meter. Satisfactory results could be obtained. The crack initiation and propagation processes during impact fracture could be well divided on the curve, depending on the intrinsic characteristic of specimen tested; ductile or brittle. The absorbed impact energy in Zr-basd BAM was largely used for crack initiation not for crack propagation process. The fracture surfaces under impact loading showed different feature when compared with the static cases.

• 한국방재학회 논문집
• /
• 제5권4호
• /
• pp.49-57
• /
• 2005

본 연구에서는 상재하중을 적용한 굴착모형실험을 통하여 상재하중 적용으로 인한 굴착단계별, 벽체강성 및 지반조건에 따른 토류벽체의 수평변위, 배면지반 지표침하, 토류벽체에 적용되는 토압변화 및 분포에 대하여 실험결과치, 이론치 및 현장자료 분석치와 상호비교, 분석하여 상재하중 적용에 의한 영향을 규명하였다. 그 결과 상재하중이 적용된 모형지반에서의 지표침하곡선 형태는 상재하중 미 적용시 지표침하 곡선형태의 정규확률 분포곡선과 달리 상재하중 중앙 부분이 최대 침하를 일으키는 포물선 형태의 침하를 보이고 있으며, 굴착단계별 상재하중 적용으로 인한 벽체최대수평변위는 최종굴착시에 0.8H(보:굴착깊이) 지점에서 벽체의 최대수평변위가 발생하였으며, 상재하중 적용에 따른 벽체변위량의 증가범위는 벽체상부로부터 하중이격거리에 2배의 깊이까지 증가범위를 보였다. 또한, 굴착단계별 지표면의 침하로 인한 기초판의 각 변위는 최종단계에서의 각 변위가 가장 크게 발생하였고, 벽체강성별로는 두께 4mm(유연계수 ${\rho}\;:480m^3/t$) 벽체가 두께 9mm(유연계수 ${\rho}\;: 40m^3/t$)보다 최대 3배 이상 발생하고 있어 벽체강성의 영향이 매우 큼을 알 수 있다.