• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.195-204
• /
• 2020

본 연구에서는 띠톱기계의 서로 다른 톱 절삭 상태에서, 최적의 톱 절삭력 및 최적의 컨트롤러 파라미터가 어떻게 설정 되는지에 대한 문제를 해결하기 위한 연구를 진행하였다. 이를 위해 띠톱 기계의 톱 절삭 시스템의 수학적 모형을 수립하고, 전통적인 PID 제어 방법과 톱 절삭력의 폐회로(closed-loop)제어에 대하여 병행하여 깊게 연구함으로써, 주 모터의 동력, 띠톱기계의 동적특성 및 톱날 강도 등의 컨트롤러 파라미터 및 톱 절삭 부하가 제어 성능에 대한 규칙을 발견하여, 톱 절삭 너비와 컨트롤러 파라미터(비례계수 K_p)의 관계, 톱 절삭력의 설정값의 관계를 얻어, 일종의 띠톱 기계의 스마트 톱 절삭 제어를 갖는 시스템 방안을 제기하였다. 연구 결과에 따르면 홈 절단면의 절삭 재료를 톱 절삭 시 스마트 톱 절삭 시스템의 톱 절삭 효율이 기존 톱 절삭 시스템보다 18.1㎠/min(48%) 향상 되였으며, 이 방안이 뛰어난 제어 효과를 가지고 있음을 보여 주었다.

• 한국재료학회지
• /
• 제10권1호
• /
• pp.62-68
• /
• 2000

Reactive DC magnetron sputtering 법으로 AISI 304 스테인레스강 기판 위에 TiN 극박막을 50nm∼700nm 두께로 증착한 후, 경화된 AISI 52100 강과 알루미나를 마모 상대재로 하여 박막의 미끄럼마모 시험을 상온 대기 중에서 행하고, 마모 상대재에 따른 TiN 극박막의 마찰과 마모 거동을 연구하였다. AISI 52100 강구를 마모 상대재로 한 경우, TiN 박막은 200g 이하의 마모 하중과 0.035m/sec의 낮은 미끄럼 속도 조건에서 500nm 내외의 극박으로도 마찰계수가 0.1 내외로 유지되는 우수한 내마모성을 보였다. 이같이 우수한 내마모성은 AISI 52100 강으로부터 천이된 Fe가 산화되어 TiN 박막 표면에 Fe 산화층을 형성한 때문으로 설명되었다. 그러나, 마모 상대재를 알루미나 볼로 한 경우에는 TiN 박막 위에 산화층이 형성되지 않고, 마모가 거의 되지 않는 알루미나 볼과 박막층 사이에 국부적 응력집중 등이 발생하여 시험된 전 조건 하에서 박막층의 박리 현상이 관찰되었고 높은 마찰계수가 측정되었다. 또한 기판의 평균 표면조도, Ra가 박막의 두께와 유사할 때 마찰계수가 급격히 상승하는 현상이 관찰되었다.

• 간호행정학회지
• /
• 제4권1호
• /
• pp.193-214
• /
• 1998

The purpose of the present study was to examine the causal model of nurses' organizational commitment. Based on literature review and Fishbein's behavioral intentions model ((Fishbein. 1967: Fishbein & Ajzen. 1975). the organizational commitment was conceptualized within a motivational framework that mediate between antecedents variables and outcome variables. Antecedent variables were pay, promotional chances. continuing education opportunity. rigidity of the administration. paticipative decision making, latitude, group support, role conflict, work load, need for achievement. experience and pride for professional nursing. Outcome variable was turnover intention. The subjects were 373 nurses who were working at 2 large general hospitals located in Seoul. It represents a response rate of 94%. Data for this study was collected from August 29 to September 22 in 1997 by Questionnaire. Path analysis with LISREL 7.16 prigram was used to test the fit of the proposed conceptual model to data and to examine the causal relationships among variables. The result showed that both the proposed model and the modified model fit the data excellently. It needs to be notified, however. that path analysis can not count measurment errors: measurement error can attenuate estimates of coefficient and explanatory power. Nontheless the model revealed considerable explanatory power for organizational commitment (58%), pride for professional nursing (50%) and turnover intention(40%). In predicting nurses' organizational commitment, the findings of this study clearly demonstrated 'the pride for professional nursing' might be the most important variables of all the antecedent variables. Group support, role conflict, need for achievement were also found to be important determinants for the organizational commitment and turnover intention, The result showed experience might be a predictor for 'pride for professional nursing' and 'turnover intention' but not 'organizational commitment', 'Rigidity of the administration' and latitude were also found to have important roles in predictingr the organizational commitment, while participative decision making might have an impact on turnover intention. On the other hand promotional chance had an influence on all the outcome variables, while pay only on turnover intention. In predicting turnover intention, the result clearly revealed 'the pride for professional nursing' and 'organizational commitment' might be the most powerful predictors among all the variables. Theses results were discussed, including directions for the future research and practical implications drawn from the research were suggested.

• 간호행정학회지
• /
• 제4권1호
• /
• pp.183-214
• /
• 1998

The purpose of the present study was to examine the causal model of nurses' organizational commitment. Based on literature review and Fishbein's behavioral intentions model ((Fishbein, 1967;Fishbein & Ajzen. 1975), the organizational commitment was conceptualized within a motivational framework that mediate between antecedents variables and outcome variables. Antecedent variables were pay, promotional chances, continuing education opportunity, rigidity of the administration, paticipative decision making, latitude, group support, role conflict, work load, need for achievement, experience and pride for professional nursing. Outcome variable was turnover intention. The subjects were 373 nurses who were working at 2 large general hospitals located in Seoul. It represents a response rate of 94%. Data for this study was collected from August 29 to September 22 in 1997 by Questionnaire. Path analysis with LISREL 7.16 prigram was used to test the fit of the proposed conceptual model to data and to examine the causal relationships among variables. The result showed that both the proposed model and the modified model fit the data excellently. It needs to be notified, however, that path analysis can not count measurement errors; measurement error can attenuate estimates of coefficient and explanatory power. Nontheless the model revealed considerable explanatory power for organizational commitment (58%). pride for professional nursing (50%) and turnover intention(40%). In predicting nurses' organizational commitment. the findings of this study clearly demonstrated 'the pride for professional nursing' might be the most important variables of all the antecedent variables. Group support. role conflict, need for achievement were also found to be important determinants for the organizational commitment and turnover intention. The result showed experience might be a predictor for 'pride for professional nursing' and 'turnover intention' but not 'organizational commitment'. 'Rigidity of the administration' and latitude were also found to have important roles in predictor for the organizational commitment, while participative decision making might have an impact on turnover intention. On the other hand promotional chance had an influence on all the outcome variables, while pay only on turnover intention. In predicting turnover intention, the result clearly revealed 'the pride for professional nursing' and 'organizational commitment' might be the most powerful predictors among all the variables. Theses results were discussed, including directions for the future research and practical implications drawn from the research were suggested.

• 한국지반환경공학회 논문집
• /
• 제19권4호
• /
• pp.33-38
• /
• 2018

제체 재료의 다짐 불량에 의한 내부 침식은 국내 제방의 주요 붕괴 원인으로, 제방의 안전진단에 있어서 제체의 다짐 상태 평가는 매우 중요한 점검 사항이다. 본 연구에서는 제체의 다짐상태 평가 시 동적 콘 관입시험의 현장 적용성을 검증하기 위해 대표적인 다짐평가 기법인 평판재하시험에 대해 상관관계를 분석하였다. 시험 부지의 지반 특성 및 토층 심도를 파악하기 위해 표준관입시험을 6회 수행하였다. 평판재하시험 15회, 동적 콘 관입시험 47회 수행 후 크리깅(Kriging) 기법으로 공간분포를 얻었다. 평판재하시험의 공간분포와 일정 관입깊이에서의 동적 콘 관입시험 공간분포 간의 피어슨 상관 계수를 계산하였다. 평판재하시험의 지지력과 관입 깊이 5cm, 10cm, 15cm에서의 동적 콘 관입시험의 타격횟수는 약한 양의 상관관계를 갖는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.410-416
• /
• 2015

Recently, a new $Y_2O_3$ coating deposited using the EB-PVD method has been developed for erosion resistant applications in fluorocarbon plasma environments. In this study, surface crack formation in the $Y_2O_3$ coating has been analyzed in terms of residual stress and elastic modulus. The coating, deposited on silicon substrate at temperatures higher than $600^{\circ}C$, showed itself to be sound, without surface cracks. When the residual stress of the coating was measured using the Stoney formula, it was found to be considerably lower than the value calculated using the elastic modulus and thermal expansion coefficient of bulk $Y_2O_3$. In addition, amorphous $SiO_2$ and crystalline $Al_2O_3$ coatings were similarly prepared and their residual stresses were compared to the calculated values. From nano-indentation measurement, the elastic modulus of the $Y_2O_3$ coating in the direction parallel to the coating surface was found to be lower than that in the normal direction. The lower modulus in the parallel direction was confirmed independently using the load-deflection curves of a micro-cantilever made of $Y_2O_3$ coating and from the average residual stress-temperature curve of the coated sample. The elastic modulus in these experiments was around 33 ~ 35 GPa, which is much lower than that of a sintered bulk sample. Thus, this low elastic modulus, which may come from the columnar feather-like structure of the coating, contributed to decreasing the average residual tensile stress. Finally, in terms of toughness and thermal cycling stability, the implications of the lowered elastic modulus are discussed.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.209-220
• /
• 2003

현장타설말뚝의 주변마찰력을 산정하기 위하여 Hoek-Brown 모델의 일반공식이 수정되었다. 원지반 상태를 고려하는 Hoek-Brown의 일반공식에 근거하여 본 연구에서 제안된 단위주변면마찰력의 산정기법은 이전 원지반 무결암의 일축 압축강도만을 고려하여 단위주면마찰력을 산정하는 방법에 비해 상당한 뛰어난 적용성을 보인다. 본 연구에서 제안된 방법을 이용하여 암반에 근입된 현장타설말뚝의 단위주면마찰력에 대한 상한계와 하한계를 구성하는 것이 가능하며, 기존 문헌에 보고된 단위주면마찰력에 대한 시험결과의 대부분이 이 두 범위에 존재하는 것으로 확인되었다. 또한 제안된 방법을 통해 단위주면마찰력을 산정할 때 입력 변수에 대한 기본적인 가정만으로도 예측치와 측정치간에는 훌륭한 상관관계를 보였다. 여기서 도출된 상관관계식을 기존의 공식들과 비교한 결과 무결암의 강도가 작은 경우에는 Horvath와 Kenney의 제안식이, 그리고 암의 강도가 큰 경우에는 Rosenberg와 Journeaux의 제안식이 상관식과 근사한 결과를 보였다. 한편 GSI 및 구속압에 대한 영향분석을 수행한 결과 두 인자들과 정규화된 단위주면마찰력은 동반 상승하는 관계를 보였으며, 단위주면마찰력의 산정식이 멱함수의 형태일 경우에는 단위주면마찰력과 일축압축 강도 사이에 적용되는 계수는 GSI 및 구속응력에 따라 변하는 것으로 관측되었다.

• 한국환경과학회지
• /
• 제24권11호
• /
• pp.1343-1362
• /
• 2015

As a result of analysis based on the observed data for BOD, COD and TOC in order to manage non-biodegradable organics in the Geumho River, COD/BOD ratio was analyzed as the occupying predominance proportion. In this study, the classification(changes in water quality measurement : increase, equal, decrease) and measurement of BOD and COD were analyzed for trends over the past 10 years from 2005 to 2014 in the Geumho River. The Geumho River is expected to need non-biodegradable organics management because BOD was found to be reduced 61.1% and COD was found to be increased 50%. As a result of the analysis of land use, the Geumho-A is a unit watershed area of $921.13km^2$, which is the most common area that is occupied by forests. The Geumho-B is a unit watershed area of $436.8km^2$, which is the area that is highest occupied by agriculture and grass of 24.84%. The Geumho-C is a unit watershed area of $704.56km^2$ accounted for 40.29% of the entire watershed, which is the area that is occupied by urban of 15.12%. Load of non-biodegradable organics, which is not easy biodegradable according to the discharge, appeared to be increased because flow coefficient of COD and TOC at the Geumho-B were estimated larger than 1 value. The management of non-point sources of agricultural land is required because the Geumho-B watershed area occupied by the high proportion of agriculture and field. In this segment it showed to increase the organics that biodegradation is difficult because the ratio of BOD and TOC was decreased rapidly from GR7 to GR8. Thus, countermeasures will be required for this.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.108-108
• /
• 2009

본 연구의 목적은 바지선에 의해 발생하는 해상풍속측정용 마스트 구조물의 충격손상을 최소화 시키기 위한 것이다. 마스트와 바지선 사이의 충격은 보통 복잡한 형태로 이루어진다. 충격해석은 상용유한요소해석 프로그램인 ANSYS LS-Dyna를 통하여 분석하였다. 바지선속을 변화시켜 다양한 상태의 하중케이스를 고려하였고 충격방지고무의 비선형성을 고려한 시간이력해석을 수행하였으며 변형률 에너지, 전체 변형량, 플라스틱 변형률, 내부충격에너지, 영구손상된 변형량 등을 검토하였다. 해상상태조건인 해양파의 운동과 바지선의 상하방향 운동을 무시하는 것으로 가정하였다. 충격속도에 변화에 따른 영구변형을 확인한 후 자연고무, 복합고무, 네오프렌 등의 고무시험 물성치로부터 구한 Mooney-Rivlin 상수를 적용하여 적절한 충격방지고무의 두께를 제안하였다. 본 연구를 통하여 구조물의 두께와 충격방지고무의 두께비에 대한 경향을 파악할 수 있으며 구조물의 설계에 적용할 수 있게 된다. 추후 해상조건을 고려한 연구를 수행해야 할 것이다.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.460-473
• /
• 2017

In order to certificate the contamination assessment of heavy metals in surface sediments from the Nakdong river. Surface sediments were collected of 24 sampling sites (main 14st., tributary 10st.) and analyzed for grain size heavy metals contents. Study area mainly composed of sand (avg. 94.1%) and mean grain size was $1.46{\Phi}$ on average. Heavy metals contents (avg. Al: 12.5%, Zn; 74.4, Cr: 45.3, Li: 26.0, Pb: 17.1, Ni: 10.5, Cu: 7.8, Cd: 0.22 mg/kg) were relatively high contents in the composed of fine sediments. In addition, the results of pearson's correlation coefficient showed that most heavy metals and grain size (silt and clay) were highly correlated. The contents of Zn (6st.) and Ni (1st.) evaluated as moderately polluted, Zn (6st.) evaluated as LEL when compared with sediment quality standard of USEPA and Ontario sediment quality guidelines. Most heavy metals contents were I levels that dose not affected the benthos when compared with sediment pollution evaluation standard of NIER. The results of EX, EF, Igeo and CF showed the contents of Zn, Pb and Cd exceed the background contents and distributing of anthropogenic pollution and evaluated as moderately polluted level. And Nm-08 were relatively high level of contamination in the study area. However as results of PLI (less than 1), all sampling sites were evaluated unpolluted level.