• Korean Journal of Food Science and Technology
• /
• v.27 no.5
• /
• pp.799-806
• /
• 1995

The steady shear and small amplitude oscillatory dynamic rheological properties of citrus pectin $([\eta]=3.75\;dL/g)$ were characterized for a wide range of pectin concentrations $({\sim}6%)$. The typical power-law flow was observed above 2.0% concentration, and the shear rate dependence of viscosity increased with pectin concentration. The transition from dilute to concentrated regime, determined from the double logarithmic plot of ${\eta_{sp.o}}\;vs\;C[\eta]$, occurred at a critical coil overlap parameter $C^{*}[\eta]\approx4.0$, at which ${\eta_{sp.o}}$ corresponded to approximately 10.0. The slopes of ${\eta_{sp.o}}\;vs\;C[\eta]$, at $C[\eta]\;at\;C[\eta]C^{*}[\eta]$were 1.1 and 4.5, respectively. The steady viscosity $(\eta)$ displayed a good superposition at ${\eta}/{\eta}_o\;vs\;{\gamma}/{\gamma}_{0.8}$ relation with an exception of high concentration (6%), which arised from the significant deviation of flow behavior index (n values of $\eta_{a}=K\gamma^{n-1}$) at high concentration. Dynamic measurements showed that the loss modulus $(G^{\prime\prime})$ was much higher than the storage modulus $(G^\prime)$for all concentrations studied, indicating predominant viscoelastic liquid-like behavior of pectin solutions. The frequency dependence of $G^\prime$ was higher than that of $G^\prime\prime$ at the same concentration, whose trend was more pronounced with decreasing pectin concentration. The shear viscosity $(\eta)$ was almost identical to the complex viscosity $(\eta^{*})$ at low concentration, following the Cox-Merz rule, but they became increasingly different at high concentration.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.1-16
• /
• 1996

In an effort to determine the combined effects of major parameters of heat exchanger tubes on the nucleate pool boiling heat transfer in the scaled in-containment refueling water storage tank (IRWST), a total of 1,966 data for q'quot; versus ${\Delta}T$ has been obtained using various combinations of tube diameters, surface roughness, and tube orientations. The experimental results show that (1) increased surface roughness enhances heat transfer for both horizontal and vertical tubes, (2) the two heat transfer mechanisms, i.e.,enhanced heat transfer for both horizontal and vertical tubes, (2) the two heat transfer mechanisms, i.e., enhanced heat transfer due to liquid agitation by bubbles generated and reduced heat transfer by the formation of large vapor slugs and bubble coalescence are different in two regions of low heat fluxes (q'quot; $\leq$50kW/$m^2)$ and high heat fluxes (q'quot; $\geq$50kW/$m^2)$ depending on the orientation of tubes and the degree of surface roughness, and (3) the heat transfer rate decreases as the tube diameter is increased for both horizontal and vertical tubes, but the effect of tube diameter on the nucleate pool boiling heat transfer for vertical tubes is greater than that for horizontal tubes. Two empirical heat transfer correlations for q'quot;, one for horizontal tubes and the other for vertical tubes, are obtained in terms of surface roughness $({\varepsilon})$ and tube diameter (D). In addition, a simple empirical correlation for nucleate pool boiling heat transfer coefficient $(h_b)$ is obtained as a function of heat flux (q'quot;) only.ucleate pool boiling heat transfer coefficient $(h_b)$ is obtained as a function of heat flux (q'quot;) only.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.496-499
• /
• 1994

The antioxidant effect of capsaicin, the pungent principle of red pepper and oleoresin extracted from red pepper was investigated by measuring TBA(Thiobarbituric acid) value and hydroperoxide value using CL-HPLC(Chemiluminescence-high performance liquid chromatography) during storage at $30^{\circ}C$. The antioxidant activity of capsaicin and oleoresin was compared with erythorbate already used. The antioxigenic effect of capsaicin and oleoresin was very effective to the preservation of ground bacon belly meat. Especially, oleoresin have a remarkable effect to prevent the peroxidation of ground bacon belly meat. Capsaicinoids were known as the main additives in Korea, but the antioxidant activity of meat products has not been reported. So, we suggest that capsaicin, especially, oleoresin combined with other natural antioxigenic substances as like tocopherol may be effective to prevent the oxidation of ground bacon belly meat.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.693-700
• /
• 1992

As an approach to study a new natural antioxidant for edible fats and oils, antioxidative fractions from acorn powder were characterized. The oxidative stabilities of soybean, palm, beef tallow, and lard oil containing the acorn active fraction extracted with various organic solvents were studied by determining the peroxide value during the storage at $60^{\circ}C.$ And this effective antioxidative components were isolated and identified by thin layer chromatography and high performance liquid chromatography. The proximate compositions of acorn powder were water 11.9~12.0%, protein 7.1~7.4%, starch 65.5~69.4%, fat 2.1~2.6%, fiber 2.1~3.6%, ash 2.4~2.6%, and total tannin 4.6~6.8%, respectively. The final yield of fraction extracted by sequential order of acetone : $H_2O$(1 : 1) and ethylacetate was 2.8~3.1%. Gallic acid, digallic acid and gallotannin were contained this final fraction. The main antioxidative activity was speculated due to the presence of gallic acid in acorn powder extract. The antioxidative activity was more effective in fat water emulsion than just fat system. Antioxidative activities measured by peroxide value were quite high in beef tallow and soybean emulsion, but low in lard and palm oil emulsion in the concentration of 200ppm acorn extract. Therefore, the addition of 200ppm acorn extract was suggested to expect effective antioxidation concentration in the reaction system.

• Journal of the Korean Applied Science and Technology
• /
• v.2 no.2
• /
• pp.39-46
• /
• 1985

The study was carried out to investigate interrelationships among the acid, peroxide, iodine, thiobarbituric acid values, and changes of fatty acid compositions of some vegetable oils added to soybean milk. A storage temperature of $100^{\circ}C$ was used for the oxidation of the oils, and to determine of variation of the chemical properties and changes of the fatty acid composition, all the samples were carried out in every 8 hours for 40 hours. The changes in fatty acid compositions of the vegetable oils were measured by high performance liquid chromatography. The results obtained were as follow; 1. The acid values of the fresh soybean, corn, and palm oils added to the soybean milk were 0.05, 0.12, and 0.06, whereas those of the oils stored for 40 hours were 0.08, 0.18, and 0.09, respectively. 2. The peroxide values of the fresh soybean, corn, and palm oils added to the soybean milk were 0.3, 1.0, and 0.3, whereas those of the oils stored for 40 hours were 1.1, 1.1, and 0.9, respectively. 3. The iodine values of the fresh soybean, corn, and palm oils added to the soybean milk were 132.7, 124.1, and 57.0, whereas those of the oils stored for 40 hours were 127.3 108.3, and 52.0, respectively. 4. The thiobarbituric acid values of fresh soybean, corn, and palm oils added to the soybean milk were 0.18, 0.05, and 0.02, whereas those of the oils stored for 40 hours were 0.25, 0.19, and 0.07, respectively. 5. The percent content of the major fatty acids of the soybean, corn, and palm oils freshly added to the soybean milk were 2.3%,2.5%,and 25.2%for palmitic acid, 3.2%,3.2%,and 4.8%for stearic acid, 39.7%, 40.7%, and 59.3% for oleic acid, 49.9%, 53.0%, and 10.5% for linoleic acid, and 4.7%, 0.4%, and 0.7% for linolenic acid, respectively. Those of the oils stored for 40 hours were 2.9%, 4,5%, and 36.7% for palmitic acid, 8.5%, 6.8%, and 7.0% for stearic acid, 37.8%, 38.8%, and 49.2% for oleic acid, 46.2%, 49.5%, and 5.8% for linoleic acid, and 4.2%, 0.1%, and 0.1% for linolenic acid, respectively. The fatty acid compositions changed significantly: the amounts of the unsaturated fatty acid decreased considerably. The rsults of the present study demonstrated greater stability of the palm oil as compared with the stability of soybean oil and corn oil added to the soybean milk.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.8
• /
• pp.1239-1244
• /
• 2003

Microcapsules were prepared by coacervation method using acetone/liquid paraffin system to control the ripening of kimchi. Eudragit E100, which was soluble at below pH 5.0 in aqueous solution, was used to make microcapsules to be sensitive to acidity of kimchi. The microcapsules with Eudragit E100 containing grapefruit seed extract (GFSE) showed the highest yield of 92.13%, the size of microcapsules was decreasing as increasing the amount of aluminium stearate, a dispersing agent. Morphology of the microcapsules determined by scanning electron microscopy showed spherical forms. GFSE, encapsulated antimicrobial agents, was quickly released at acidic buffer (pH 4,5,6) within 1 storage day. However, 70% of encapsulated GFSE in Eudragit E100 microcapsules was continuously released at pH 7 till 3 days, and it was sustained till 9 days. Characteristics of kimchi containing microcapsules of GFSE were analysed with ripening period. Decease of pH in kimchi was retarded with the added GFSE microcapsules till 2 days of fermentation, but GFSE did not affect pH in kimchi after 3 days. Total numbers of microorganisms and lactic acid microorganisms in kimchi were decreased with increasing the amount of the added GFSE microcapsules, however, the effect of controlled released GFSE from pH sensitive Eudragit E100 microcapsules was hard to detect. These results suggest the possibility of pH sensitive microcapsules for high qualify of kimchi.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.337-350
• /
• 2016

Lithium-ion rechargeable batteries (LIBs) have garnered increasing attention with the rapid advancements in portable electronics, electric vehicles, and grid-scale energy storage systems which are expected to drastically change our future lives. This review describes a separator membrane, one of the key components in LIBs, in terms of porous structure and physicochemical properties, and its recent development trends are followed. The separator membrane is a kind of porous membrane that is positioned between a cathode and an anode. Its major functions involve electrical isolation between the electrodes while serving as an ionic transport channel that is filled with liquid electrolyte. The separator membranes are not directly involved in redox reactions of LIBs, however, their aforementioned roles significantly affect performance and safety of LIBs. A variety of research approaches have been recently conducted in separator membranes in order to further reinforce battery safeties and also widen chemical functionalities. This review starts with introduction to commercial polyolefin separators that are currently most widely used in LIBs. Based on this understanding, modified polyolefin separators, nonwoven separators, ceramic composite separators, and chemically active separators will be described, with special attention to their relationship with future research directions of advanced LIBs.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.47-57
• /
• 2014

LNG plant projects tend to be implemented in overseas owing to its characteristics, so their project management scheme is somewhat different from those of general projects. Value chain in a LNG plant project includes exploration/production of gases, physical liquefaction/chemical conversion processes, transportation and storage. Key factors in the chain include liquefaction process (including ultra-low temperature liquefaction) to convert natural gas into liquid materials or fuel, and Front End Engineering Design (FEED) package, as well as Engineering, Procurement and Construction (EPC) technology comprising control, operation and construction. Success of a complex LNG plant project implemented in overseas depends on decision-making process in project management. Accordingly, to develop a decision-making model in of plant construction, the study extracted none factors in project management by EPC stage and assessed importance of each factor. The result showed that items in both project management and project risk management are important. Especially, the study developed a decision-making model in the construction stage of a LNG plant project based on the project management factors and importance assessment. The developed decision-making model would lay groundwork in building a decision-making system in construction stage of project management.

• Journal of Environmental Health Sciences
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1979

An experimental study was carried out to develop a rural type toilet of which the effluent could not transmit parasitic diseases at a village in Kangwon Province, Korea, during the period of January through December 1978, A drum tank (dia. 57cm$\times$90cm) and a cement tank (100cm$\times$100cm$\times$100cm) were filled with human excreta collected from toilets of the villages (the ratio of feces to urine was estimated approximately 1: 5) at once and three threecompartment toilets were constructed and used by people. pH, temperatures and viability of parasitic eggs were examined with the content of toilets. Rusults are summarized as follows: 1. pH increased from 7.0 at the beginning of experiment to 7.5 or 8.0 after 4 months of storage in drum tank as well as in cement tank and so did from 7.0~7.5 in the first tank to 8.0~8.5 in the third tank of all three-compartment toilets. 2. Temperatures of content at middle part of toilets in January through March ranged from 2 to 6$\circ$C which were 2-4$\circ$C higher than those of air, and those of lower part were again 1~2$\circ$C higher than of middle part. but temperatures of air, at middle part andat lower part in April were 14$\circ$C, 9~10$\circ$C and 8~9$\circ$C respectively, in July 29$\circ$C, 20~21$\circ$C and 19~20$\circ$C respe ctively and in October 17$\circ$C, 14$\circ$C and 14~13$\circ$C respectively. 3. All the parasitic eggs were degenerated about 4 months after filling drum tank with human excreta on 10th April while 10% of eggs were degenerated on 15th May, and all the eggs were degenerated about 4 months after filling cement tank on 24th August while about 10% were degenerated on 11th September and 20% on 4th October. 4. Degeneration rates of eggs were only 5~15% at 5cm below surface in the first tanks of three-compartment toilets while 45~65% at 50cm below, and concentration rates of eggs in second tanks were 8~12% of those in first tanks and only a few eggs were found in third tank but all of them were degenerated. Specific gravity of liquid of 1.022~1.024 in second tanks was not enough for overflowing eggs into third tanks.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.91-101
• /
• 2012

A list of volatile fatty acids (VFA) including propionic acid, butyric acid, isovaleric acid, valeric acid, etc. is well known for offensive odorants. The analysis of odorant VFA is a highly delicate task due to high reactivity and unstable recovery rate. At present, analytical methods of VFA are recommended to include alkali impregnation filter method and alkali absorption method by the malodor prevention law of the Korea Ministry of Environment (KMOE). In this review, a survey has been made to explore various approaches available for the analysis of VFA to include both official methods of the KMOE and others. In light of the unreliability of those established analytical methods, it is highly desirable to develop some substituting methods for VFA. Among such options, one may consider such option as sorbent tube (ST) sampling and cryogenic trapping-thermal desorption technique. Moreover, procedures used for standard preparation, sampling steps, and instrumental detection stage are also evaluated. Application of container sampling (like Tedlar bag) is however not recommendable due to significant (sorptive) loss in sampling and in storage stage. In the detection stage, the use of GC/MS is recommendable to replace GC/FID due to the presence of diverse interfering substances. Thus, it is essential to properly establish the basic quality assurance (QA) for VFA analysis in air.