• 한국수산과학회지
• /
• 제37권5호
• /
• pp.366-371
• /
• 2004

Powder and liquid products of the seasoned and smoked fish were manufactured with small-sized skipjack tuna (Euthynus pelamis) captured in the East Sea, Korea. The property changes of nucleotides and their related compounds, amino acid, and sensory attribute during storage were analyzed. IMP content was the highest among the nucleotides and their related compounds followed by inosine in both powder and liquid products. Nucleotides and their related compounds of the powder product increased slightly as storage period increased, while those of liquid product were constant. Glutamic acid $(15.6{\%})$, aspartic acid $(10.7{\%})$, and lysine $(9.3{\%})$ were major amino acids of the power product, while histidine $(36.2{\%})$ and taurine $(10.6{\%})$ were high in the liquid product. Free amino acid contents of liquid product increased during storage periods. There was no significant difference In the concentration of nucleotides and their related compounds, and composition of free amino acid between the products with/without liquid smoke. Aroma and acceptance were good in both products, while bitterness and sweetness were poor.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.54-61
• /
• 2005

Liquid-phase catalytic degradation of waste high-density polyethylene (HDPE) over ZSM-5 (powder type (PW)) and ZSM-5+binder (granule type (GR)) has been investigated with a stirred semi-batch operation at 400°C. Two ZSM-5 catalysts with a different crystal size were synthesized and also each ZSM-5 (25%) Catalyst was mixed with a same binder (kaolin: silica sol: alumina = 55%:10%:10%). The performance of prepared catalysts that has different physicochemical properties was discussed with the cumulative amount distribution, molecular weight distribution and also paraffin, olefin, naphthene and aromatic (PONA) distribution in liquid product. These liquid product quality and distributions were changed depending on the physicochemical properties of the catalyst. Moreover, the characteristic of ZSM-5 in the catalyst was strongly influenced on the activity and PONA distribution in liquid product.

• 청정기술
• /
• 제19권3호
• /
• pp.233-242
• /
• 2013

PVC 함유 가연성폐기물의 열분해시 Ca 계열 및 Fe 계열 산화물을 탈염 흡수제로 사용하여 생성물의 분포, 액상 생성물의 비점분포, 생성물의 염소 농도에 미치는 영향을 조사하였다. Fe 계열 산화물 분말을 액상에서 흡수제로 사용시 오일의 수율이 뚜렷하게 감소하였다. 이러한 현상은 산화철이 열분해시 일부 열분해 촉매의 역할을 하였을 가능성을 나타낸다. 반면에 오일의 비점분포가 낮아지는 현상은 발견되지 않았으며 이러한 현상은 산화철의 촉매 반응성이 크지 않기 때문으로 보인다. Ca 계열 산화물 분말을 흡수제로 사용한 경우 오일 수율이 감소하는 현상은 발견되지 않았으며 비점분포도 큰 변화가 없었으나 탈염성능이 산화철 분말 흡수제 보다 더 우수하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권1호
• /
• pp.7-11
• /
• 2021

Cryogenic vessels are special equipment that requires periodic evaluation of their thermal insulation performance. At the current standard, the test is considered as the loss product or heat leakage of cryogenic vessel, which takes over 72 h to evaluate; consequently, a large amount of working medium is discharged to the environment in the process. However, hydrogen is flammable and explosive, and the discharged gas may be dangerous. If liquid hydrogen is replaced with liquid nitrogen before testing, the operation then becomes complicated, and the loss product or heat leakage cannot respond to the thermal insulation performance of cryogenic vessels for liquid hydrogen. Therefore, a novel method is proposed to evaluate the heat leakage of cryogenic vessels for liquid hydrogen in self-pressurization. In contrast to the current testing methods, the method proposed in this study does not require discharge or exchange of working medium in all test processes. The proposed method is based on one-dimensional heat transfer analysis of cryogenic vessels, which is verified by experiment. When this method is used to predict the heat leakage, the comparison with the experimental data of the standard method shows that the maximum error of heat leakage is less than 5.0%.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.60-63
• /
• 2003

Semi-solid forming is the process of stirring alloy during solidification, making the mixture of liquid and solid, solidifying it, reheating it to the solid-liquid coexistent temperature, and then injecting this semi solid slurry into dies. In the semi-solid die casting process, it is very important to find out the correlation of injection condition, microstructure and mechanical properties. Especially, an improper injection condition is the main cause of liquid segregation and non-homogeneous mechanical properties due to the difference of solid fraction according to the position of the products. To ensure the database requisite to the semi-solid die casting product, it is essential to acquire the mechanical properties considering liquid segregation to the injection condition. In this study, the effect of injection condition on liquid segregation, formability, microstructure and mechanical properties in a thin product was investigated.

• Fisheries and Aquatic Sciences
• /
• 제14권3호
• /
• pp.230-233
• /
• 2011

To determine the cost-effectiveness of converting fish waste into liquid fertilizer, this study analyzed the production of 3 L of liquid fertilizer from the fermentation of fish waste. The total product cost of the fertilizer was calculated to be $165.26 for a one-batch operation. If the seed culture was repeated five times, the total product cost could be reduced to $36.39/L. According to this analysis, the reutilization of fish waste as liquid fertilizer was not particularly economically attractive at present, and plant-scale production would be necessary for commercialization. This is the first cost-effectiveness analysis of the bioconversion of fish waste into liquid fertilizer.

• 한국응용과학기술학회지
• /
• 제19권3호
• /
• pp.198-205
• /
• 2002

Isothermal pyrolysis of high density polyethylene(HDPE), polypropylene(PP) and polystyrene(PS) was performed at $450^{\circ}C$, respectively. The effect of pyrolysis time on yield and product composition was investigated. Conversion and liquid yield obtained during HDPE pyrolysis continuously increased with time up to 80minutes, but those of PP and PS did not largely change after 35minutes. Each liquid product formed during the pyrolysis was classified into gasoline, kerosene, light oil and wax according to the distillation temperature based on the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. The major liquid product of HDPE pyrolysis was light oiH34 wt.% based on the amount of HDPE treated) and the amounts of the other liquid ingredients(gasoline, kerosene and wax) were almost the same. On the other hand, the pyrolysis of PP produced 27 wt.% gasoline, 22 wt.% kerosene, 24 wt.% light oil and 13wt.% wax, and the pyrolysis of PS produced 56 wt.% gasoline, 12 wt.% kerosene, 9 wt.% light oil and 13 wt.% wax.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.1059-1066
• /
• 2008

열중량반응기와 미분반응기를 이용하여 ABS의 역분해 및 생성물분포 특성을 연구하였으며 미분반응기를 이용한 실험의 열분해온도는 $400\sim450^{\circ}C$이었다. 각 상의 열분해생성물의 수율은 무게측정을 통해 얻었으며 액상생성물의 탄소수분포는 GC-SIMDIS 방법을 통해 측정하였다. 열중량분석실험에서는 측정할 수 없었던 다량의 고상잔류물의 생성을 회분식 미분반응기실험을 통해 확인학 수 있었다. 반응온도와 시간이 증가할수록 액상생성물의 수율과 평균분자량은 감소하였으나 액상생성물 중의 스티렌모노머의 생성은 두드러지게 증가하였다. ABS 열분해 반응에서 말단절단의 속도계수인 활성화에너지 값은 54.1kcal/mole이었다.

• Preventive Nutrition and Food Science
• /
• 제6권4호
• /
• pp.235-239
• /
• 2001

In order to enhance suitable processing methods of imported Pacific saury, Cololabis saira, storage stability of seasoned-dried Pacific saury (imported product) treated with liquid smoke (T2 product) was compared with a control (C, seasoning only) and T1 (treatment of 0.05% BHT instead of liquid smoke). The histamine contents of 3 seasoned-dried products were within a stable range (9.08 ~ 12.08 mg/100 g) during storage. The water activities of all products were in the 0.698 ~ 0.755 range. The viable cell count of T2 was lower than those of C and T1 during storage. The change in color values of C, T1 and T2 were not significant with increasing storage period. The results of the sensory evaluation during storage showed that the shelf-life of T2 was extended to 60 days, while those of C and T1 were limited to up to 45 days.

• 한국자기공명학회논문지
• /
• 제24권4호
• /
• pp.96-103
• /
• 2020

A new NMR method to monitor solvent-localized NMR signals in the two-phase liquid system is suggested. This method based on intermolecular single-quantum coherence (iSQC). Here, we exploited the feature of the local action of distant dipolar field (DDF) effect in order to filter out specific NMR signals dissolved in different solvents. This solvent specific iSQC spectroscopy was carried out on a model two-phase liquid system (D-glucose in water/palmitic acid in chloroform), and showed solvent-localized NMR signals. We believe our approaches might be useful in metabolic analysis such as two-phase liquid extraction scheme for labile chemical species.