• Journal of Embryo Transfer
• /
• v.33 no.3
• /
• pp.185-194
• /
• 2018

The aim of this study was performed to evaluate the effects of ice-binding protein from the arctic yeast Leucosporidium (LeIBP) supplementation on cryopreservation of boar sperm. The collected semen was diluted ($1.5{\times}10^8/ml$) in lactose egg yolk (LEY) and cooled at $5^{\circ}C$ for 3 h. The cooled semen was then diluted ($1{\times}10^8/ml$) in LeIBP containing LEY with 9% glycerol and maintained at $5^{\circ}C$ for 30 min. The semen was divided into six experimental groups (control, 0.001, 0.005, 0.01, 0.05 and 0.1 mg/ml of LeIBP). The straws were kept on above the liquid nitrogen ($LN_2$) vapors for 20 minutes and then plunged into $LN_2$. After thawing, computer-assisted sperm analysis was used for sperm motility and flow cytometry was performed to assess the viability, acrosome integrity (FITC-PSA/PI), ROS (DCF/PI), lipid peroxidation (BODIPY C11/PI) and apoptosis (Annexin V/PI), respectively. No significant responses were observed for sperm motility. However, sperm viability was significantly increased on 0.05 and 0.1 mg/ml of LeIBP groups compared to control (P < 0.05). In addition, acrosome integrity was significantly increases LeIBP groups (P < 0.05) and both ROS and lipid peroxidation level were lower in all LeIBP groups than those of control (P < 0.05). On the other hand, a significant higher apoptosis rate was observed in 0.05 and 0.1 mg/ml of LeIBP groups compared to control (P < 0.05). It can be assumed that a supplementation of LeIBP in boar sperm freezing extender is an effective method to increase the sperm qualities after cryopreservation.

• Journal of Embryo Transfer
• /
• v.32 no.4
• /
• pp.311-317
• /
• 2017

Cryopreservation of oocytes by vitrification technique may contribute a lot in the field of reproductive biotechnology. The objectives of the present study were to evaluate the effectiveness of two cryo-devices for vitrification of immature oocytes of indigenous zebu cows. Slaughter house derived immature cumulus-oocyte-complexes (COCs) of cows were vitrified using 15% dimethyl sulphoxide (DMSO) as cryoprotective agent (CPA) with 0.5 mol sucrose in TCM 199 supplemented with 20% FBS. Vitrification of COCs was completed after immediate plunging of COCs loaded cryotop or French mini straw into the liquid nitrogen ($LN_2$). Then the COCs containing cryotop or French mini straws were warmed in 0.25 mol sucrose and 20% FBS supplemented TCM 199 followed by in vitro culture in $50{\mu}l$ droplets of bicarbonate buffered TCM 199 supplemented with 10% FBS, pyruvate, FSH and oestradiol for 24 hrs at $39^{\circ}C$ with 5% CO2 in humidified air. After maturation culture, oocytes were denuded and examined under inverted microscope for presence of polar body as the indication of maturation. Denuded oocytes were also stained by whole mount technique using 1% orcein to examine the maturation by presence of MII chromosomes. The in vitro maturation rate was significantly (p<0.05) higher in oocytes vitrified and warmed using crytop ($47.1{\pm}6.9%$) than that of French mini straw ($15.9{\pm}12.5%$). Moreover, in vitro maturation rate was significantly (p<0.05) highe r in control oocytes (not vitrified) ($84.5{\pm}14.2%$) than that of vitrified oocytes. In conclusion, cryotop is better than French mini straw as cryo-device for vitrification of bovine immature oocytes.

• Journal of Embryo Transfer
• /
• v.29 no.4
• /
• pp.385-391
• /
• 2014

Objective of this study was to investigate the effect of nicotinic acid (NA) on the characteristics in fresh semen of miniature pig. We evaluated viability, acrosome reaction and mitochondrial integrity of sperm on 0, 3, 7 and 10 days during storage period with nicotinic acid. As results, the survival rate of sperm in 15 mM NA (day 3, $87.8{\pm}1.2%$; day 5, $84.0{\pm}2.7%$; day 7, $82.2{\pm}0.9%$) and 30 mM NA (day 3, $87.7{\pm}0.3%$; day 5, $84.4{\pm}2.5%$; day 7, $82.3{\pm}0.7%$) groups were higher than control and 5 mM NA groups in 3, 7 and 10 days of semen storage. The NA-treated sperm on 10 day was used day for observing acrosome integrity. The survival sperm with acrosome reaction was higher in 30 mM NA group (day 3, $2.7{\pm}0.2%$; day 5, $3.3{\pm}0.6%$; day 7, $11.4{\pm}0.3%$) than in the control, significantly (P<0.05). Moreover, the live sperm with mitochondrial integrity was higher in whole treatment groups of NA than control group, significantly (P<0.05). Specially, most mitochondrial integrity on 10 day of semen storage was significantly higher in 30 mM NA group ($90.2{\pm}1.6%$) than other treatment groups (control, $81.8{\pm}3.1%$; 5 mM NA, $83.4{\pm}3.0%$; 15 mM NA, $89.1{\pm}0.7%$, P<0.05). In conclusion, supplement of NA in liquid semen of miniature pig can improve and maintain semen quality, such as viability, acrosome reaction, and mitochondria integrity.

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.276-293
• /
• 2011

In this study a modeling system consisting of Weather Research and Forecasting (WRF), Sparse Matrix Operator Kernel Emissions (SMOKE), the Community Multiscale Air Quality (CMAQ) model, and the CMAQ-Model of Aerosol Dynamics, Reaction, Ionization, and Dissolution (MADRID) model has been applied to estimate enhancements of $PM_{10}$ during Asian dust events in Korea. In particular, 5 experimental formulas were applied to the WRF-SMOKE-CMAQ (MADRID) model to estimate Asian dust emissions from source locations for major Asian dust events in China and Mongolia: the US Environmental Protection Agency (EPA) model, the Goddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model, and the Dust Entrainment and Deposition (DEAD) model, as well as formulas by Park and In (2003), and Wang et al. (2000). According to the weather map, backward trajectory and satellite image analyses, Asian dust is generated by a strong downwind associated with the upper trough from a stagnation wave due to development of the upper jet stream, and transport of Asian dust to Korea shows up behind a surface front related to the cut-off low (known as comma type cloud) in satellite images. In the WRF-SMOKE-CMAQ modeling to estimate the PM10 concentration, Wang et al.'s experimental formula was depicted well in the temporal and spatial distribution of Asian dusts, and the GOCART model was low in mean bias errors and root mean square errors. Also, in the vertical profile analysis of Asian dusts using Wang et al's experimental formula, strong Asian dust with a concentration of more than $800\;{\mu}g/m^3$ for the period of March 31 to April 1, 2007 was transported under the boundary layer (about 1 km high), and weak Asian dust with a concentration of less than $400\;{\mu}g/m^3$ for the period of 16-17 March 2009 was transported above the boundary layer (about 1-3 km high). Furthermore, the difference between the CMAQ model and the CMAQ-MADRID model for the period of March 31 to April 1, 2007, in terms of PM10 concentration, was seen to be large in the East Asia area: the CMAQ-MADRID model showed the concentration to be about $25\;{\mu}g/m^3$ higher than the CMAQ model. In addition, the $PM_{10}$ concentration removed by the cloud liquid phase mechanism within the CMAQ-MADRID model was shown in the maximum $15\;{\mu}g/m^3$ in the Eastern Asia area.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.