• 제목/요약/키워드: liquid fuel waste

검색결과 84건 처리시간 0.019초

즉발감마선 측정을 위한 HPGe 검출기의 전계수 또는 동시계수모드에서의 광대역 계측효율 보정 (Efficiency Calibration of HPGe Detector in Normal ana Coincidence Mode for the Determination of Prompt Gamma-ray)

  • 송병철;박용준;지광용
    • 방사성폐기물학회지
    • /
    • 제2권2호
    • /
    • pp.97-104
    • /
    • 2004
  • NIPS 시스템은 중성자 핵반응 결과 방출되는 즉발 감마선을 정량적으로 측정하는 장치이며 고체 및 액체 폐기물 중 존재하는 다양한 원소를 비파괴적으로 분석할 수 있는 장점이 있다. 본 연구에서는 NIPS 시스템에 이용된 고순도반도체 검출기의 계측효율을 $^{l33}$Ba 및 $^{152}$Eu 방사성 동위원소 선원과 $^{35}$ Cl(n, ${\gamma}$)$^{36}$ Cl 핵반응 시 발생되는 즉발감마선을 이용하여 80 keV에서 8 MeV까지 넓은 영역에 대하여 구하였다. $^{35}$ Cl(n, ${\gamma}$)$^{36}$ Cl 핵반응을 이용한 고에너지 감마선의 계측효율은 즉발감마선의 방사능 값을 정확히 알 수 없기 때문에 저 에너지 영역에서 정확히 알고 있는 검출기 효율곡선에 규격화시켜 전 에너지 영역에서의 효율보정곡선을 구하였다. 또한 KCl 표준용액에 $^{252}$ Cf 중성자 선원을 조사시켜 표준용액으로부터 방출되는 즉발 감마선을 고순도반도체 검출기로 측정하고 광대역 계측효율 곡선을 이용하여 수용액 시료에서의 평균 열중성자 속을 예측하였다. NIPS 측정시스템은 주변 재료 물질의 핵반응으로 방출되는 감마선 background를 줄이기 위해 두 개의 고순도반도체 검출기를 이용한 동시계수 장치가 고안되었으며, 동시계수 모드에서의 계측효율도 함께 고려되었으며, 표준선원을 이용하여 전 계수 또는 동시계수모드에서의 background에 대한 측정감도를 비교하였다.다.

  • PDF

화학적 산화 방법을 이용한 농축폐액 내 $^{14}C$$^{3}H$ 정략 (Simultaneous Assay of $^{14}C$ and $^{3}H$ in Evaporator Bottom by Chemical Oxidation Method)

  • 안홍주;이홍래;한선호
    • 방사성폐기물학회지
    • /
    • 제3권3호
    • /
    • pp.193-200
    • /
    • 2005
  • 원전에서 발생된 농축폐액 방사성폐기물로부터 $^{14}C$$^{3}H$를 분리 정량하기 위하여 potassium persulfate와 sulfuric acid의 산화제를 이용하는 산화증류법을 적용하였으며, $^{14}C$$^{3}H$는 각각 $^{14}CO_2$ 기체와 HTO 액체로 순차적으로 분리되었다. 분리된 $^{14}C$$^{3}H$는 액체섬광계수기를 이용하여 계수되었고, 소광효과를 보정하여 방사능을 측정하였다. 산화증류법을 검증하기 위하여 $^{14}C$ 방사성 표준물은 $Na_{2}^{14}CO_{3}$$^{14}C-alcohol$, 그리고 $^{14}C-toluene$의 3종류, 그리고 $^{3}H$ 방사성 표준물은 HTO가 이용되었다. 또한 산화되기 어려운 방향족 화합물 중 $^{14}C-toluene$을 대상으로 가장 최적의 산화 조건을 조사하고자 황산용액 농도에 따라 FT-IR 피크 변화를 평가하였다. 방사성표준시료의 경우와 동일한 방법으로 원전 농축폐액 시료로부터 $^{14}C$$^{3}H$를 분리 검출하였는데, 그 결과 회수율은 $^{14}C$$^{3}H$가 각각 $8.35{\sim}l.38{\times}10^3$ Bq/g와 $2.46{\times}10^2{\sim}1.40{\times}10^4$ Bq/g로 검출되었다.

  • PDF

핵연료분말 제조공정에서 발생된 여액으로부터 우라늄 회수 및 회수된 우라늄 화합물의 열분해 특성 (Uranium Recovery from Nuclear Fuel Powder Conversion Plant Filtrate and its Thermal Decomposition Characteristics)

  • 정경채;정지영;김병호;김태준;최종현
    • 한국세라믹학회지
    • /
    • 제39권2호
    • /
    • pp.204-209
    • /
    • 2002
  • 본 연구에서는 AUC 공정에서 발생되는 액체폐기물에 미량 함유되어 있는 우라늄을 회수/재사용하기 위해 액상에서 침전법을 이용하여 용해도가 작은 우라늄화합물을 얻었으며, 이 화합물에 대한 chemical analysis, thermal analysis, x-ray diffraction analysis 및 FT-IR 분석을 통해 물성 특성을 해석하였다. 연구결과, 화학분석 및 FT-IR 분석으로부터 우라늄화합물은 $UO_4{\cdot}2NH_4F$ 형태를 가지고 있음을 알 수 있었으며, 평균 2∼3${\mu}m$ 입자 크기를 갖는 hexagonal 형태를 나타내었다. 열 분해시 분해 온도에 따라 중간물질로 $UO_4F,\;UO_4,\;UO_3,\;U_3O_8$ 등으로 변환되었으며, 상온에서 800$^{\circ}C$까지의 공기분위기에서 일정한 가열속도로 열분해시킬 경우, $UO_4{\cdot}2NH_4F{\rightarrow}UO_4F{\rightarrow}UO_4{\rightarrow}UO_3{\rightarrow}U_3O_8$의 반응 메커니즘을 나타내었다.

설비공학 분야의 최근 연구 동향: 2011년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2011)

  • 한화택;이대영;김서영;최종민;백용규;김수민
    • 설비공학논문집
    • /
    • 제24권6호
    • /
    • pp.521-537
    • /
    • 2012
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.