• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1169-1172
• /
• 2004

Polyimides are blended with photoreactive polymers in order to improve the thermal stability of molecular orientation of photoreactive groups induced by polarized UV irradiation. The polyimide/photopolymer blends can be applied for the photo-induced liquid crystal alignment layers. However, the polyimides are also decomposed by UV irradiation and this may have the negative effect on the orientation of liquid crystals. In order to elucidate the influence of polyimide on the molecular orientation of liquid crystal, non-photoreactive naphthalenic polyimide (1,4,5,8-naphthalene tetracarboxylic dianhydride} was selected for the blend alignment layers. We prepared the blends of photo-reactive coumarin polymers and naphthalenic polyimide, and investigated the orientation of liquid crystals. Thermal stability of the orientation of liquid crystals was enhanced due to the thermally stable polyimide. However, there was no other side-effect of polyimide on the orientation of liquid crystals and this might be attributed to the non-photo-reactivity of naphtahlenic polyimide.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.69-78
• /
• 2016

Liquid crystals are important materials because of their applications in display technology and many other scientific applications. Different mixtures of liquid crystals and their doped samples have gained interest because a single liquid crystal compound cannot fulfill all the required parameters for the display application. The doping can be accomplished with dyes, polymers, or composite nanoparticles among other substance. The addition of nanoparticles can modify the physical properties of the host liquid crystal and enhances the performance of electro-optical devices. The present study is focused on investigations of possible changes in dielectric and electro optical properties of liquid crystals caused by doping with ceramic nanoparticles. Including smaller nanoparticles were found to be better candidates for use in suppressing the unwanted ion effects in liquid crystal displays.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.176-180
• /
• 2005

The liquid crystalline properties of a series of main chain liquid crystalline polymers and four series compounds consisting of aromatic type Schiff base mesogenic units and polymethylene flexible spacers were studied. The thermal and liquid crystalline properties were investigated by differential scanning calorimetry and on the hot stage of a polarizing microscope. The nature of the liquid crystalline phase of the polymers and compounds depended greatly on the length of the central polymethylene spacer and on the terminal alkoxy groups. Polymers I and Series III exhibited an even-odd effect in melting and isotropization temperatures but Series II and Series IV exhibited an even-odd effect in isotropization temperatures. They formed nematic and smectic mesophases in melts as judged by their optical textures observed through a polarizing microscope.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.71-75
• /
• 1998

Liquid crystalline compounds with amine terminal group and related linear and cross-linked liquid crystal polymers with epoxy resin structure were synthesized and characterized to develope matrix materials for polymer dispersed liquid display applications. Both linear and crosslinked side chain type liquid crystal polymers made with aromatic amine mesogens and ethylene glycol diglycidyl ether exhibited nematic texture as shown by polarized optical microscope(POM) and their transition temperatures were determined both by DSC and POM. Liquid crystal polymer samples also showed even-odd effect as the spacer length of aromatic amine mesogens were varied, however, the effect was samller than that of low molecular weight mesogens. Changes of nematic-to-isotropic transition($T_{NI}$) of crosslinked type polymer liquid crystals were also disscussed in relation to the concentration change of crosslinking agent 1,10-diaminodecane.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.559-566
• /
• 2006

The isothermal crystallization behavior of blends of poly(ethylene terephthalate) and liquid crystalline polymers(LCP) was studied. The Avrami analyses were applied to obtain the information on the crystal growth geometry and factors controlling the rate of crystallization. The crystallization kinetics for the blends followed the classical Avrami equation up to a high degree of crystallization regardless of crystallization temperature, The values of Avrami exponent, n, for PET in the blends were estimated to be around 2, which indicate that the polymer crystals grow into one-dimensional linear or fiber-like crystallization mode. The crystallization rate, as expected, decreases with increasing the crystallization temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.623-624
• /
• 2009

Here we report a photo polymerization-induced hybrid alignment of a nematic liquid crystal cell which can be applied for a roll to roll fabrication process. Predominant polymerization in the vicinity of UV incident front induced a diffusion of monomers toward front slide and anisotropic polymer network was formed parallel to the polarization direction of the UV light. This induced planar alignment of liquid crystals at the front slide. Simultaneously, homeotropic alignment was induced at the bottom slide as the polymers are phase-separated from a bottom slide.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.493-495
• /
• 2007

Cinnamate groups are well-known for a dimerization reaction upon exposure to ultraviolet irradiation and a thermal reaction after being heated. In this study, to verify the thermal reaction of the cinnamate group in detail, we investigated the thermal crosslinking of cinnamate oligomers. The thermal reaction of cinnamate oligomers of low molecular weight is induced more readily by thermal energy compared with that of cinnamate polymers. The orientation of the liquid crystal depended on the length of the spacers in the cinnamate oligomers.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.599-608
• /
• 2004

New two kinds of methacrylate monomers having a benzene ring inserted between spacer and methacryloyl group and the chiral center connected to the terminal of the mesogenic structures were synthesized. In these two series the effects for the formation of the liquid crystals in regard to the length changes of the spacers and mesogenic groups were investigated. The first series did not show any liquid crystalline phases in the intermediate compounds nor in the end products. However, the methacrylates of second series showed the liquid crystalline phases in the intermediate compounds as well as in the final products regardless of the length of the spacers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1125-1128
• /
• 2007

The laminating technique for developing flexible liquid crystal display was demonstrated by using a thin UV curable polymer film and a plastic substrate with patterned polymer wall structure. We adopted the rigid wall structure to provide a solid mechanical support for the stable molecular alignment of liquid crystals (LCs) in the device. The cover film was prepared to have an ability of aligning LC molecules by patterning a micro-groove structure using the soft-lithographic process. These two substrates can be assembled tightly by the laminating and one-step UV irradiation process because of the adhesive nature of the used UV curable polymers. Proposed method can be used to fabricate the flexible LC display with simplicity and also be applicable for a cost-effective roll-to-roll process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.41-42
• /
• 2000

Photosensitive polyimides containing cinnamoyl and coumarin side groups were synthesized in a high molecular weight, giving a good quality of films. Nematic liquid-crystal (LC) molecules on the film were aligned along the direction with an angle of $97-99^{\circ}$ respect to the polarization of ultraviolet (UV) light. The LC alignment was induced mainly by the photoaligned polymer chains made by the first UV-exposure even though the film was treated by multiple exposures with changing the polarization of UV light. From these results, it is concluded that the LC alignment on the film is induced by the photodimerization rather than the trans-cis photoisomerization.