• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.957-960
• /
• 2003

We have studied the influence of rubbing directions on electro-optic characteristics of the fringe field driven hybrid aligned nematic liquid crystal (LC) cell by computer simulation. When a LC with positive dielectric anisotropy is used, the results show that the driving voltage and transmittance decreases as the rubbing direction with respect to horizontal electric field direction increases. The reason for decrease in light transmission is the reduction of twist angle and increase of tilt angle on the center of common electrode. In this paper, we have studied how the rubbing angle effects on the transmittance of the cell by investigating a distribution of electric field and LC director.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.93-94
• /
• 2000

In this work, we proposed a reflective antiferroelectric liquid crystal display (AFLCD) using a half-wave cell whose tilt angle is $22.5^{\circ}$. To check the validity of our design, we fabricated a reflective half-wave AFLC cell of which tilt angle is $24.9^{\circ}$, and measured viewing angle dependent reflectance and VIS reflection spectra. In the results, the half-wave AFLC cell in the reflective configuration exhibits high brightness, high contrast ratio of 20:1.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.357-360
• /
• 2005

A novel wide viewing angle flexible liquid crystal display will be demonstrated. The crossed matrix-type micro-cell structure was adopted in this design. The LC domains were divided into four different tilted directions by the combination effect of pixel fringe field and crossed matrix type micro-cell. It can create four domains without rubbing process and form the cell gap without spacer. For flexible color fabrication, a novel inkjet printing technology is adopted. This cost effective wide viewing angle color flexible LCD technology can be a good solution for high performance flexible LCD.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3187-3195
• /
• 1993

Combustion of liquid-fuelled combustion in a high-temperature vitiated-air stream was studied. The mathematical formulation comprise the application of Eulerian conservation equation to the gas phase and Lagrangian equation of droplet motion. The latter is coupled with a droplet-tracking technique (PSI-CELL Model) which regard the droplet phase as a source of mass, momentum, and energy to the gaseous phase. Reaction rate is determined by taking into account the Arrhenius reaction rate based on a single-step reaction mechanism. The calculated profiles show somewhat uncertainess at the upstream, but bases data for designing the combustor followed by 2-phase flow were obtained.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.524-526
• /
• 2007

Polymer dispersed liquid crystal (PDLC) films consist of micro-droplets of liquid crystals dispersed in a polymer matrix. To make wide area PDLC filled devices, it is necessary to develop reliable method of vacuum injection of PDLC solution instead of the capillary injection. However, well-known 2-ethylhexylacrylate (EHA), main element of a prepolymer, exhibits the volatility problems, when the PDLC solution is placed under the low pressure. In this study, we developed the vacuum injection process to fill a wide area cell. Experimental results indicate that the $V_{90}$(turn-on voltage) of the PDLC cell made by a vacuum injection method are lower than that of the PDLC cell made by a capillary injection method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.73-75
• /
• 2007

Micro-cell LC film and polymer network liquid crystal (PNLC) film by using continuous compatible process have been developed . A high-contrast micro-cell LC film has a strong potential as a high-performance flexible device. PNLC film has the low driving voltage. Both films show the characteristics of lightness, thinness and mechanical stability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.259-262
• /
• 1998

The liquid crystal (LC) alignment and pretilt angle generation using photo-alignment method were investigated in this study. We obtained that the monodomain alignment of nematic(N) LC increases with increasing irradiation time in a cell with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (Pl) surfaces. We consider that the monodomain alignment is able to be anisotropic dispersion force due to photo-depolymerization of polymer with LPUV light irradiation on Pl surface. Also, we observed that the uniform alignment of NLC is obtained in a cell with normally LPUV light irradiated on Pl surface at 30 min. and then oblique LPUV is secondly irradiated on Pl surfaces rotated by 90$^{\circ}$. The pretilt angle of NLC is generated about 1.5$^{\circ}$ with oblique angle 60$^{\circ}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.271-274
• /
• 1998

In this paper, the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by one side transcription alignment method on PI surface with side chain were investigated. The LC alignment produced by the transcription alignment method is attributable to a memory effect of the NLC on Pl surfaces. We observed that the pretilt angle of NLC is generated about 3.6$^{\circ}$ in a cell with one side transcription alignment on PI surface. Also, the electro-optical(EO) performance of TN-LCD with one side transcription alignment method on PI surface will be discussed.

• Journal of Information Display
• /
• v.4 no.2
• /
• pp.25-28
• /
• 2003

We propose a new optical configuration of a hybrid-aligned nematic liquid crystal cell for reflective displays, which consist of a biaxial film for obtaining wide viewing angle and a half-wave film for achieving high contrast. As a result, we can achieve wide viewing angle of (80( for the horizontal direction and (50( for the vertical direction and uniform reflection spectrum.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.30-38
• /
• 2013

In this study, a catalyst slurry was prepared with a Pt/C catalyst, Nafion ionomer solution as a binder, an ionic liquid (IL) (1-butyl-3-methylimidazolium tetrafluoroborate), deionized water and ethanol as a solvent for the application to polymer electrolyte fuel cells (PEFCs) at high-temperatures. The effect of the IL in the electrode of each design was investigated by performing a cyclic voltammetry (CV) measurement. Electrodes with different IL distributions inside and on the surface of the catalyst electrode were examined. During the CV test, the electrochemical surface area (ESA) obtained for the Pt/C electrode without ILs gradually decreased owing to three mechanisms: Pt dissolution/redeposition, carbon corrosion, and place exchange. As the IL content increased in the electrode, an ESA decrement was observed because ILs leaked from the Nafion polymer in the electrode. In addition, the CVs under conditions simulating leakage of ILs from the electrode and electrolyte were evaluated. When the ILs leaked from the electrode, minor significant changes in the CV were observed. On the other hand, when the leakage of ILs originated from the electrolyte, the CVs showed different features. It was also observed that the ESA decreased significantly. Thus, leakage of ILs from the polymer electrolyte caused a performance loss for the PEFCs by reducing the ESA. As a result, greater entrapment stability of ILs in the polymer matrix is needed to improve electrode performance.