• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.474-478
• /
• 2010

순수 파라핀에 10 wt%의 LDPE를 첨가한 용융성 혼합 연료로 제작한 다이아프램을 장착한 연료를 사용하여 하이브리드 로켓 연소 실험을 수행하였고 다이아프램이 없는 파라핀 연료의 결과와 비교하였다. 용융성 다이아프램을 설치한 경우 강화된 난류와 열전달로 인해 다이어프램 후방의 연료 후퇴율이 크게 증가하였으며 특성속도와 비추력이 증가하였다. 연소 불안정 해석에서는 심각한 연소 불안정이 관찰되지 않았다. 이를 통해 용융성 다이어프램이 용융성 연료를 사용하는 하이브리드 로켓의 낮은 연소 효율 개선에 효과적임을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.469-473
• /
• 2010

본 연구에서는 빠른 후퇴율을 갖는 용융성 고체연료를 사용한 연소 실험을 수행하여 연소 중 압력진동 특성을 분석하고 연소 불안정의 위해성을 검토하였다. 빠른 후퇴율을 가지는 용융성 고체연료는 기존의 폴리머계 연료에 비해 압력 진동의 진폭이 증가하였다. 그러나 연료 그레인 내부 직경의 증가가 연소실 압력 진동의 증폭을 제한하여 급격한 연소 불안정은 거의 일어나지 않았다. 축방향 인젝터를 사용하는 경우 연료 연소량의 큰 증가와 예연소실에서의 와류 진동이 큰 압력 진동을 유발하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.43-49
• /
• 1998

The availability of large quantities of waste woods provides an impetus for investigating woody biomass potential uses. Polyurethane (PU) foams are prepared with reacting isocyanates and polyols, and are used. in various industry fields. Thus, lignocellulosic waste raw-materials are proposed as replacement for synthetic polyol to PU foam formulation. In this study PU foams were manufactured from liquefied woods, methanediisocyanate(MDI), catalyst, foaming stabilizer, and viscosity aids. The polyol content, isocyanate.hydroxyl group (NCO/OH) ratio, and water content were varied to evaluate their effects on the foaming and water absorption of the PU foams. Less than 400 Molecular weight. of polyethylene glycol(PEG) and 1 to 3 solvent to woody raw-material ratio were desirable for liquefying woody materials. Liquefying rate was increased with more than 3 % addition of inorganic and organic catalysts and raising reaction temperature more than $150^{\circ}C$. Addition of starch enhanced liquefying of woody materials. Fourty percents of starch resulted in about 90% liquefying rates. Foaming rates were increased with increasing moisture contents of liquefied wood. Moisture contents of 0.6% resulted in 5 time-foaming rates, and seven percents of moisture contents more than 30 time-foaming rates. But, an increase in water content may result in a decrease in cross-links between wood polyol and isocyanate, because the NCO/OH ratio is constant. Increasing moisture contents have significantly decreased density of PU foams. The optimum water content should be about 2.5% or less in this adopted condition.

• 한국미생물·생명공학회지
• /
• 제24권2호
• /
• pp.217-221
• /
• 1996

Various treatments of naked barley with commercial liquefying enzymes have been emploved to reduce high viscosity of naked barley in cooking as a raw material for alcohol production and to increase alcohol yield. The enzyme BAN used for cooking and liquefaction of naked barley was able to make a reduction of one third of viscosity and to enhance alcohol yield of 4 l/Ton of raw material than the T120L was. Of course, alcohol yield depended in part on the applied saccharifying enzymes. The low temperature cooking of naked barley with BAN was favorable compared with high temperature cooking for both of reducing viscosity (210 vs. 237 cp) and final alcohol yield (Yp/so: 0.397 vs. 0.395 g/g) in industrial scale.

• 한국미생물생명공학회:학술대회논문집
• /
• 한국미생물생명공학회 1976년도 제7회 학술발표회
• /
• pp.184.5-184
• /
• 1976

In the course of studies on thermostable liquefying amylase from thermostable Bacillus spp., we have isolated a strain which produces amylase activity. This strain was identified to be Bacillus stearothermophlus. The amylase of this strain demonstrated a maximum activity at 65$^{\circ}C$ and Ca$\^$＋＋/ did not improve thermostability of the enzyme although the erzyme was capable of hydrolyzing starch at temperature of 80$^{\circ}C$ and above. The maximum amount of the enzyme was product at pH 7.0, 50$^{\circ}C$.

• 미생물학회지
• /
• 제7권1호
• /
• pp.41-44
• /
• 1969

A new method for manufacturing the active seed starter (Korean Kok-Ja) has been studied, designed new method consists of the boiling process of raw wheat material and pure culture process of Rhizopus fungi. The feasibility study for industrialization of these methods have been performed, the liquefying and saccharifying activities were put to analysis and compared with conventional product of Kok-Ja. The isolated strains of mold from raw wht and Kok-Ja were idetified as Rhizopus sp., Aspergillus sp., Aspergillus niger sp., Endomyces sp., and Fungi imperfecii. It is proved that the saccharifying and liquefying activities are much stronger than that of conventional product of Kok-Ja, and the growth of Rhizopus strain in boild what material are vigorous than that of old type Kok-Ja. Then it is considered the newly designed method is effective to manufacturing a fine better Kok-Ja.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1591-1602
• /
• 1996

In operating the underwater engines such as encountered in exploring submarines, the dumping of the exhaust gas out of the engine requires a large portion of the total power, frequently amounting to 25-30% of the power generated. This unfavorable circumstance can be cured by liquefying the exhaust gas and storing it. In the present study, two liquefaction systems were simulated to enhance the overall efficiency; one is a closed cycle diesel engine and the other is a closed cycle LNG engine. The liquefied natural gas (LNG) is chosen as a fuel, not only because its use is economical but also because its cold energy can be utilized within the liquefaction system. Since a mixture of oxygen and carbon dioxide is used as an oxidizer, liquefying carbon dioxide is of major concern in this study. For further improving this system, the intercooling of the compressor is devised. The necessary power consumed for the liquefying system is examined in terms of the related properties such as pressure and temperature of the carbon dioxide vessel as a function of the amount of the exhaust gas which enters the compressor. The present study was successful to show that much gain in the power and reduction of the vessel pressure could be achieved in the case of the closed cycle LNG engine. The compression power of exhaust gas were observed remarkably lower, typically only 6.3% for the closed cycle diesel engine and 3.4% for the closed cycle LNG engine respectively, out of net engine power. For practicality, a design -purpose map of the operating parameters of the liquefaction systems was also presented.

• 유기물자원화
• /
• 제28권3호
• /
• pp.5-14
• /
• 2020

본 연구는 돈분과 사과착즙박 혼합 혐기소화액의 호기성 처리 과정에서 황산(H₂SO₄)을 이용한 혐기소화액의 pH를 7.0과 6.5 조절 처리가 암모니아 휘발과 화학적 특성 변화에 미치는 영향을 구명하기 위하여 수행하였다. 혐기소화액은 0.3 ㎥ air/㎥·min 조건에서 60일 동안 폭기처리를 실시하였다. 무처리구의 혐기소화액은 호기성 액비화 과정 중 pH가 상승하고, EC와 T-N 함량이 감소하는 경향을 나타내었다. 황산 무처리 혐기소화액은 pH가 높아 액비화 과정에 암모니아 농도가 172.6 mg/L로 높았으나 황산 처리 pH 조절 혐기소화액은 암모니아(NH₃) 발생이 유의적으로 감소되었다. 황산 무처리 혐기소화액은 액비화 과정 중 암모늄태 질소 함량이 47.2% 감소되었다. 혐기소화액의 pH 조절 처리구는 암모늄태 질소의 함량이 황산 처리 pH 조절 처리구에 비하여 높았다. 또한, 황산(H₂SO₄)처리는 혐기소화액에서 질소, 인산 함량의 증가에 영향을 주어 비료 성분이 높아지는 효과를 나타내었다. 따라서 혐기소화액의 황산 첨가에 의한 pH 조절은 호기성 액비화 공정에서 암모니아 휘산 저감과 질소 함량을 높이기 위한 유용한 방법으로 활용될 수 있을 것이다.

• 미생물학회지
• /
• 제5권2호
• /
• pp.93-96
• /
• 1967

Especially, we mainly dealt on the isolation of mold in the sample of the Korean products, Kock Ja. The kinds of the isolated strain are such as these, Rhizopus, Mucor, Aspergillus oryzae sp., aspergillus niger sp., Penicillum and Flungi Imperfecti. The action of the starch saccharification of isolated strain and the order of liquefying action are follows: The saccharification power was R-l>R-2>M-2> Kock Ja>M-1>O-2>N-1>O-4 The liquefying power was R-1, R-2>0-2>0-4>M-2, Kock Ja>M-1>N-1 We compared the pH's saccharification curve of each kind of strain with Kock Ja. The most suitable pH value of R-1, R-2 was the closest to pH 4. 0, close value with Kock Ja. The Rhizopus species on the saccharification action of each kind of strain in regard to raw wheat starch was stronger than other kinds of strain. We think that to generalize the above result, the Rhizopus species consists of an important strain of this Kock Ja, and is an important factor for the saccharification action of Kock Ja and the existence of Mucor species as well.

• Advances in aircraft and spacecraft science
• /
• 제10권4호
• /
• pp.317-334
• /
• 2023

This paper presents a basic methodology and a set of numerical tools for the preliminary design of solid-fueled ramjet missiles. An elementary code determines the baseline system configuration comprised of warhead, guidance-control, and propulsion masses and geometries from specific correlations found in the literature. Then, the system is refined with the help of external and internal ballistics codes. Equations of motion are solved for the flight's ascending, cruising, and descending stages and the internal ballistic set of equations designs the ramjet engine based on liquefying fuels. The combined tools sized the booster and the ramjet sustainer engines for a long-range missile, intended to transport 200 kg of payload for more than 300 km range flying near 14,000 m altitude at Mach 3.0. The refined system configuration had 600 mm in diameter and 8,500 mm in length with overall mass of 2,128 kg and 890 kg/m3 density. Ramjet engine propellant mass fraction was estimated as 74%. Increased missile range can be attained with paraffin-polyethylene blend burning at near constant regression rate through primary air mass flow rate control and lateral 2-D air intakes.