• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.73-80
• /
• 2018

Certification revocation list(CRL) is needed for excluding compromised, faulty, illegitimate vehicle nodes and preventing the use of compromised cryptographic materials in vehicular communications. It should be distributed to vehicles resource-efficiently and CRL computational load of vehicles should not impact on life-critical applications with delay sensitive nature such as the pre-crash sensing that affords under 50msec latency. However, in the existing scheme, when a vehicle receives CRL, the vehicle calculates linkage values from linkage seeds, which results in heavy computational load. This paper proposes, a new CRL distribution scheme is proposed, which minimizes the time for CRL processing of vehicles. In the proposed scheme, the linkage value calculation procedure is performed by road-side unit(RSU) instead of the vehicle, and then the extracted linkage values are relayed to the vehicle transparently. The simulation results show that the proposed scheme reduces the CRL computational load dramatically, which would minimize impact on life-critical applications' operations with low latency.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.476-478
• /
• 2015

This paper deals with synthesis of 4 bar linkage by using optimum design. To design 4 bar linkage, overlay method is proposed and for optimization, genetic algorithm is applied with objective function. The accuracy of this method will be determined by errors between real value and test value. We will use Chebychev spacing to get 3 precision positions of input angles. The output angles will be determined by the function that the designer wants input and output relations to be. It will be applied to example to show the accuracy of this method. The advantages of using this method are that it is fast to get optimal solution and it is simple to use.

• The Korean Journal of Health Service Management
• /
• v.7 no.3
• /
• pp.57-69
• /
• 2013

In these days, the interest on health industry is increasing around the world. This paper attempts to estimate the economic effects of the Cosmetic Industrydusing the Input-Output Analysis. Especially, 78*78 Sector Tables were used as the first analysis tool. So then, 79*79 Sector Tables adjusted were used for that industry. The main analysis tools of this study are comparing and analyzing backward and forward linkage effects, the induced effects of the self industry and other industries and the induced coefficients such as product, value-added, job and employment. According to the result of analysis, the cosmetic industry has great economic impacts which affects the major macroeconomic factors such as product, value added and backward linkage effect. And the induced effects of the self cosmetic industry are significant compared to other industries in aspects of product, value-added, and employment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.2
• /
• pp.162-172
• /
• 2011

In this paper, simulation was used to determine accuracies of genomic breeding values for polygenic traits associated with many thousands of markers obtained from high density genome scans. The statistical approach was based upon stochastically simulating a pedigree with a specified base population and a specified set of population parameters including the effective and noneffective marker distances and generation time. For this population, marker and quantitative trait locus (QTL) genotypes were generated using either a single linkage group or multiple linkage group model. Single nucleotide polymorphism (SNP) was simulated for an entire bovine genome (except for the sex chromosome, n = 29) including linkage and recombination. Individuals drawn from the simulated population with specified marker and QTL genotypes were randomly mated to establish appropriate levels of linkage disequilibrium for ten generations. Phenotype and genomic SNP data sets were obtained from individuals starting after two generations. Genetic prediction was accomplished by statistically modeling the genomic relationship matrix and standard BLUP methods. The effect of the number of linkage groups was also investigated to determine its influence on the accuracy of breeding values for genomic selection. When using high density scan data (0.08 cM marker distance), accuracies of breeding values on juveniles were obtained of 0.60 and 0.82, for a low heritable trait (0.10) and high heritable trait (0.50), respectively, in the single linkage group model. Estimates of 0.38 and 0.60 were obtained for the same cases in the multiple linkage group models. Unexpectedly, use of BLUP regression methods across many chromosomes was found to give rise to reduced accuracy in breeding value determination. The reasons for this remain a target for further research, but the role of Mendelian sampling may play a fundamental role in producing this effect.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.128-135
• /
• 1984

Gamadi, a native rice cultivar from Nepal in which the panicle remains enclosed within its flag leaf sheath upto maturity, was crossed with different genetic marker testers of 12 linkage groups in order to analyze its linkage relationship. The results obtained from the experiment were summarized as follows: Normal segregations of all the genetic marker genes used in this experiment viz Cl, wx and Pla of linkage group I, Pn, Rd and Pub of linkage group III, and lg, g, Ps, gh, Hla, la, nl, bl, be and gl of linkage groups II, IV, V, VI, VII, VIII, IX, X, XI, and XII respectively confirmed the previous results, and also strongly indicated that the genetic constituent of the Gamadi and marker testers is same. 'Gamadiness' (the panicle enclosing character) was controlled by two complementary dominant genes with the segregation ratio of 9 Gamadi to 7 normal panicle-exserting types. These genes have been temporarily proposed as G-a and G-b for gamadiness. G-a gene was found to be linked with the neckleaf gene (nl) of linkage group Ⅸ with the crossover value of 0.3733$\pm$0.027. G-b gene appeared to be associated with the brittle culm gene (bc) of the linkage group XI with the crossover value of 0.2725$\pm$0.061.TEX>0.061.

• Korea Trade Review
• /
• v.44 no.5
• /
• pp.17-28
• /
• 2019

Although brand love is a major interest in global business, very little is known about how the effects of brand love are affected by relevant constructs. This study examines how the brand love-loyalty link is moderated by shopping value (hedonic vs. utilitarian) and how the moderated moderation effect of gender difference influences the consumer-brand relationship. Based on a unique dataset of 254 Chinese consumers of Korean cosmetic brands in China, we tested our proposed hypotheses using Regression PROCESS macro (model = 3). One of our novel findings is that brand love has a positive influence on brand loyalty. However, this relationship is sensitive to moderators. Regarding the brand love-loyalty linkage, consumers who seek hedonic shopping value is higher than consumers who seek utilitarian shopping value. In particular, female consumers are more passionate and loyal than male consumers. Finally, male consumers seeking hedonic shopping value feature greater brand love-loyal linkage than other consumers; however, this effect is very limited.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.6
• /
• pp.651-655
• /
• 1995

A simulation study on detection of linkage between genetic markers and QTL in backcross design was conducted. The effects of various sample sizes and the degree of QTL dominance on detention of linkage were examined by using a simple regression analysis. The results indicated that as sample size increased, the standard error of the estimated slope became smaller. When the dominance effect of QTL was complete, the estimated slope tended to be negative but was statistically not significant at all with type I error of greater than 50%. With complete linkage between genetic Marker and QTL, the estimated intercept value was smallest but the estimated slope was largest as expected. In most cases with various degree of dominance and sample sizes, when the actual recombination rate became larger, greater values were obtained for the slope except in the case of complete dominance of QTL.

• CDE review
• /
• v.21 no.2
• /
• pp.31-33
• /
• 2015

This paper deals with synthesis of 4 bar linkage by using optimum design. To design 4 bar linkage, overlay method is proposed and for optimization, genetic algorithm is applied with objective function. The accuracy of this method will be determined by errors between real value and test value. We will use Chebychev spacing to get 3 precision positions of input angles. The output angles will be determined by the function that the designer wants input and output relations to be. It will be applied to example to show the accuracy of this method. The advantages of using this method are that it is fast to get optimal solution and it is simple to use.

• Korean Journal of Agricultural Science
• /
• v.26 no.2
• /
• pp.77-93
• /
• 1999

This study is aiming at identifying the foreward and backward lingkage effects of the farm land base development project. Korean Government has continuously carried out farmland base development projets including the integrated agricultural development projects. large and medium scale irrigation projects and the comprehensive development of the four big river basin including tidal land reclamation and estuary dam construction for the all weather farming since 1962. the starting year of the five year economic development plans. Consequently the irrigation rate of paddy fields in Korea reached to 75% in 1998 and to escalate the irrigation rate, the Government had procured heavy investment fund from IBRD. IMF and OECF etc. To cope with the agricultural problems like trade liberalization in accordance with WTO policy, the government has tried to solve such problems as new farmland base development policy, preservation of the farmland and expansion of farmland to meet self-sufficiency of foods in the future. Especially, farmland base development projects have been challanged to environmental and ecological problems in evaluating economic benefits and costs where the value of non-market goods have not been included in those. Up to data, in evaluating benefits and costs of the projects, farmland base development projects have been confined to direct incremental value of farm products and it's related costs. Therefore the projects'efficiency as a decision making criteria has shown the low level of economic efficiencies. In estimating economic efficiencies including Leontiefs input-output analysis of the projects could not be founded in Korea at present. Accordingly this study is aimed at achieving and identifying the following objectives. (1) To identify the problems related to the financial supports of the Government in implementing the proposed projects. (2) To estimated backward and foreward linkage effects of the proposed project from the view point of national economy as a whole. To achieve the objectives, Hwangrak benefited area with reservoir which is located in Seosan-haemi Disticts, Chungnam Province were selected as a case study. The main results of the study are summarized as follows : a. The present value of investment and O & M cost were amounted to 3,510million won and the present value of the value added in related industries was estimated at 5.913million won for the period of economic life of 70 years. b. The total discounted value of farm products in the concerned industries derived by the project was estimated at 10,495million won and the foreward and backward linkage effects of the project were amounted to 6,760 and 5,126million won respectively. c. The total number of employment opportunities derived from the related industries for the period of project life were 3,136 man/year. d. Farmland base development projects were showed that the backward linkage effects estimated by index of the sensitivity dispersion were larger than the forward linkage effect estimated by index of the power of dispersion. On the other hand, the forward linkage effect of rice production value during project life was larger than the backward linkage effect e. The rate of creation of new job opportunity by means of implementing civil engineering works were shown high in itself rather than any other fields. and the linkage effects of production of the project investment were mainly derived from the metal and non-metal fields. f. According to the industrial linkage effect analysis, farmland base development projects were identified economically feasible from the view point of national economy as a whole even though the economic efficiencies of the project was outstandingly decreased owing to delaying construction period and increasing project costs.

• Asia pacific journal of information systems
• /
• v.15 no.2
• /
• pp.171-193
• /
• 2005

Small firms are considered as the last mile in electronic networks of business enterprises. Since small firms lack in their resources and capabilities for IT deployment, it seems a challenging project to make them electronically linked to their trading partners. This study aims to investigate the factors that influence the intent of small firms to adopt electronic linkage to their trading partners. This study considers the context where small firms already have transaction relationships with partner firms and where their adoption of electronic linkage may influence the nature and performance of the transactional relationships. This study considers the expected value of electronic linkage and the joint actions of the trading firms as the major factors. Its research model also includes traditional factors such as influences from the industry and the trading partner, the support of CEO, and the readiness of the trading partner. Based on the survey data from more than 1000 small firms, the present study performs regression analysis and finds that all but one factor are significant in explaining the variations in the adoption intention of small firms. The exception is the joint action, which is shown to decrease the intention. Based on the results, this study offers business and policy implications that would be useful to business managers and policy makers.