• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.26-36
• /
• 2020

The use of existing macroscopic research of pedestrian behavior on the walking link as data is limited in determining an individual pedestrian's moving route and the level of service. In macroscopic studies, it is difficult to make quantitative indices, such as pedestrian flow rate, occupied space, density, and speed for determining the level of service on pedestrian roads. Therefore, the microscopic pedestrian route is required to establish appropriate pedestrian policies. In this study, the Yeok-Sam subway station network was examined using a micro-simulation VISSIM, which was then calibrated and validated statistically. The Pedestrian Road's Level of Service of Yeok-Sam subway station area was evaluated using the pedestrian speed as the evaluating index on the Korean highway capacity handbook.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.784-799
• /
• 2013

This paper presents an adaptive rate control scheme for streaming-based content sharing service. This scheme delivers multimedia contents from a user device to another device or seamlessly redirects streaming service across heterogeneous user devices. In the proposed scheme, a streaming server adjusts video quality level according to the network and client status. Our scheme is different from other rate control schemes, because the video quality at the server is decided not only based on the available bandwidth, but also based on the device characteristics and bandwidth requirement at the access network. We also propose a bandwidth estimation method to achieve more equitable bandwidth allocations among streaming flows competing for the same narrow link with different Round Trip Times (RTTs). Through the simulation, we prove that our scheme improves the network stability and the quality of streaming service by appropriately adjusting the quality of the video stream. The simulation results also demonstrate the ability of the proposed scheme in ensuring RTT-fairness while remaining throughput efficient.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.1
• /
• pp.11-24
• /
• 2019

This paper investigates the performance comparison of a Terahertz (THz) communications for a single-carrier and a multi-carrier single antenna point-to-point communication system. The multi-carrier system and single carrier system consider the orthogonal frequency division multiplexing (OFDM) and the minimum mean square error linear equalizer (MMSE-LE), respectively. We compare the frame-error-rate (FER) and throughput performance of both the systems for a THz communication environment with the carrier frequency of 300GHz and the tapped delay line (TDL) channel models described in 3GPP. It is observed from the simulation results that the OFDM systems outperform the MMSE-LE for various configurations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.806-811
• /
• 2005

The robot to search and rescue is used in narrow space where human cannot approach. In case of this robot, it can overcome obstacles such as wrecks or stairs etc. Also, this robot can do various locomotion for each object. In this reason, an articulated robot has advantages comparing with one module robot. However, the existing articulated robot has limits to overcome vertical passages. For expanding contacted territory of robot, a novel mechanism is demanded. In this paper, the novel mechanism of articulated mobile robot is designed for moving level ground and vertical passages. This paper proposes to change wheel alignment. The robot needs two important motions for passing vertical passages like pipe. One is a motion to press wheels at wall for not falling into gravity direction. The other is a motion that wheels contact a vertical direction of wall's tangential direction for reducing loss of force. The mechanism of the robot focused that two motions can be acted to use just one motor. Length of each link of robot is optimized that wheels contact a vertical direction of wall's tangential direction through kinematic modeling of each link. The force of pressing wall of robot is calculated through dynamic modeling. This robot composes four modules. This mechanism is confirmed by dynamic simulation using ADAMS program. The articulated mobile robot is elaborated based on the results of kinematic modeling and dynamic simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1877-1882
• /
• 2013

Smart Utility Network (SUN) is not only a core technology of intelligent green home networks but also a future technology which can be applicable to various areas instead of ZigBee. SUN should be compliment with IEEE 802.15.4g standard and can provide high link margin and stable communication data-rate for poor communication surrounding. This paper describes how to design the system simulation environment for the SUN RF transceiver, and also reports the required block-level specification for each circuit and various implementation impairments. Finally, the measured performances of the fabricated RF transceiver, which has utilized the system simulation results, completely satisfies the IEEE 802.15.4g SUN PHY standard.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.563-572
• /
• 2002

Wireless mobile networks tend to drop a large portion of packets due to propagation errors rather than congestion. To Improve reliability over noisy wireless channels, wireless networks can employ forward error correction (FEC) techniques. Static FEC algorithms, however, can degrade the performance by poorly matching their overhead to the degree of the underlying channel error, especially when the channel path loss rate fluctuates widely. This paper investigates the benefits of an adaptable FEC mechanism for wireless networks with severe packet loss by analytical analysis or measurements over a real wireless network called sensor network. We show that our adaptive FEC named FECA (FEC-level Adaptation) technique improves the performance by dynamically tuning FEC strength to the current amount of wireless channel loss. We quantify these benefits through a hybrid simulation integrating packet-level simulation with bit-level details and validate that FECA keeps selecting the appropriate FEC-level for a constantly changing wireless channel.

• Earthquakes and Structures
• /
• v.10 no.2
• /
• pp.367-388
• /
• 2016

Eccentrically braced frames (EBFs) represent an attractive lateral load resisting steel system to be used in areas of high seismicity. In order to assess the likely damage for a given intensity of ground shaking, fragility functions can be used to identify the probability of exceeding a certain damage limit-state, given a certain response of a structure. This paper focuses on developing a set of fragility functions for EBF structures, considering that damage can be directly linked to the interstorey drift demand at each storey. This is done by performing a Monte Carlo Simulation of an analytical expression for the drift capacity of an EBF, where each term of the expression relies on either experimental testing results or mechanics-based reasoning. The analysis provides a set of fragility functions that can be used for three damage limit-states: concrete slab repair, damage requiring heat straightening of the link and damage requiring link replacement. Depending on the level of detail known about the EBF structure, in terms of its link section size, link length and storey number within a structure, the resulting fragility function can be refined and its associated dispersion reduced. This is done by using an analytical expression to estimate the median value of interstorey drift, which can be used in conjunction with an informed assumption of dispersion, or alternatively by using a MATLAB based tool that calculates the median and dispersion for each damage limit-state for a given set of user specified inputs about the EBF. However, a set of general fragility functions is also provided to enable quick assessment of the seismic performance of EBF structures at a regional scale.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.234-240
• /
• 2007

In this paper, a novel multi-level inverter for low cost high speed switched reluctance(SR) drive is proposed. The proposed multi-level converter has reduced number of power switches and diodes than that of a conventional asymmetric converter for SRM and smaller voltage rating of the dump capacitor comparing with energy efficient c-dump converter. It can supply five operating modes that is boosted, DC-link, zero, negative bias and negative boosted voltage. The proposed multi-level converter has fast excitation and demagnetization modes of phase current, so dynamic response can be achieved. The proposed multi-level converter is verified by computer simulation and experimental results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.12
• /
• pp.1947-1955
• /
• 1989

With the increasing complexity of cabling at sensory level in process control and manufacturing automation, field buses were introduced to replace the traditional point to point links from each sensor or acruator to its controlling equipments by a single link on which all information is transmitted seriall and multiplexed in time. In this papr, we introduce the BITBUS network as a field bus. For the service discipline of the BITBUS network, two service strategies are proposed to obtain the performance of the network. They are the equal priority cyclic service strategy and the non-equal priority cyclic service strategy. The former assigns equal priority to each node for polling and the latter assumes non-equal priority. The BITBUS network was modeled as a cyclic queueing model and it is analyzed by two methods: the Kuehn's and the Boxma's. Computer simulation was also done for the cyclic queueing model and simulation results were compared with those. Under mathematically non-analyzable environment, only the computer simulation was done. From the simulation result, in order to meet the response time requirement of 5 msec imposed by International Electrotechnical Commission when each node has the average traffic of 5000 messages/sec in manufacturing automation the number of slave nodes should be smaller than 10 at the transmission rate of 2.5 Mbps.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.767-775
• /
• 2014

New material design has obtained tremendous attention in material science community as the performance of new materials, especially in nano length scale, could be greatly improved to applied in modern industry. In certain conditions limiting experimental synthesis of these new materials, new approach by computer simulation has been proposed to be applied, being able to save time and cost. Recent development of computer systems with high speed, large memory, and parallel algorithms enables to analyze individual atoms using first principle calculation to predict quantum phenomena. Beyond the quantum level calculations, mesoscopic scale and continuum limit can be addressed either individually or together as a multi-scale approach. In this article, we introduced current endeavors on material design using analytical theory and computer simulations in multi-length scales and on multi-physical properties. Some of the physical phenomena was shown to be interconnected via a cross-link rule called 'cross-property relation'. It is suggested that the computer simulation approach by multi-physics analysis can be efficiently applied to design new materials for multi-functional characteristics.