• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2095-2110
• /
• 2015

This paper presents a design for a throughput-efficient online relay selection scheme for dual-hop multi-relay cooperative networks. Problems arise with these networks due to unpredictability of the relaying link quality and high time-consumption to probe the dual-hop link. In this paper, we firstly propose a novel probing and relaying protocol, which greatly reduces the overhead of the dual-hop link estimation by leveraging the wireless broadcasting nature of the network. We then formulate an opportunistic relay selection process for the online decision-making, which uses a tradeoff between obtaining more link information to establish better cooperative relaying and minimizing the time cost for dual-hop link estimation to achieve higher throughput. Dynamic programming is used to construct the throughput-optimal control policy for a typically heterogeneous Rayleigh fading environment, and determines which relay to probe and when to transmit the data. Additionally, we extend the main results to mixed Rayleigh/Rician link scenarios, i.e., where one side of the relaying link experiences Rayleigh fading while the other has Rician distribution. Numerical results validate the effectiveness and superiority of our proposed relaying scheme, e.g., it achieves at least 107% throughput gain compared with the state of the art solution.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.64-71
• /
• 2008

This study is on pedestrian protection device using pneumatic cylinder and simple link mechanism when vehicle collide with pedestrian. This study ensured the safety space between engine and hood after it applies to simple link mechanism and pneumatic cylinder. It can absorb the damage which measure the specific device if vehicle collide with pedestrian. Combination of simple link mechanism and pneumatic cylinder was more superior than the present pedestrian protection device. Simple link mechanism could confirm superior height and survival probability than when only cylinder operated. It also ensured enough space between engine and hood. And if a cylinder is not working because of old cylinder, poor repair or damage of accident vertical cylinder would be difficult to execute because there exists the irregular space between engine and hood. If simple link mechanism operates with only one cylinder it could ensure the regular space because simple link mechanism set up at the middle of hood. So this device could confirm high safety for pedestrian.

• Journal of Power System Engineering
• /
• v.13 no.1
• /
• pp.19-25
• /
• 2009

This paper is a study on the link composition design of a double link type level luffing jib crane using path generation synthesis passing through three precision points according to parameters, the length of backstay, the ratio of fly jib length between two moving hinges to the total length of fly jib, the location of a intermediate passing point etc. when the maximum and minimum working radius of the crane are given. The performance of the crane depends on the deviation of the luffing trajectory at fly jib tip. The luffing trajectories according to the above parameters are analyzed and shown in graphs by the developed computer program. In a real-life design, some trials are needed to arrive at a proper link composition design. Therefore, it is expected that the present computer program can rapidly and exactly deal with a link composition design proper to the design criteria of the crane.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1928-1938
• /
• 2016

The three-phase four-wire shunt active power filter (APF) is an effective method to solve the harmonic problem in three-phase four-wire power systems. In addition, it has two possible topologies, a four-leg inverter and a three-leg inverter with a split-capacitor. There are some studies investigating DC-link voltage control in three-phase four-wire APFs. However, when compared to the four-leg inverter topology, maintaining the balance between the DC-link upper and lower capacitor voltages becomes a unique problem in the three-leg inverter with a split-capacitor topology, and previous studies seldom pay attention to this fact. In this paper, the influence of the balance between the two DC-link voltages on the compensation performance, and the influence of the voltage balance controller on the compensation performance, are analyzed. To achieve the balance between the two DC-link capacitor voltages, and to avoid the adverse effect the voltage balance controller has on the APF compensation performance, a new DC-link voltage balance control strategy for the three-phase four-wire split-capacitor APF is proposed. Representative simulation and experimental results are presented to verify the analysis and the proposed DC-link voltage balance control strategy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1640-1650
• /
• 2010

To prepare for the network centric warfare, Korea Joint Tactical Data Link System(KJTDLS) has been developed by the South Korean military recently and its development is divided into two phases: basic and complete ones. Due to the limited bandwidth and low transmission efficiency of the developing KJTDLS (basic), lots of problems could be occurred when the TDMA protocol in Link-16 is applied. In this paper, a new dynamic TDMA frame structure for KJTDLS(basic) is proposed and the performance of the proposed is evaluated through the implementation of simulation.

• ETRI Journal
• /
• v.29 no.5
• /
• pp.569-595
• /
• 2007

Particularly in wireless communications, link errors severely affect the quality of the services due to the high error probability and the specific error characteristics (burst errors) in the radio access part of the network. In this work, we show that thorough analysis and appropriate modeling of radio-link error behavior are essential to evaluate and optimize higher layer protocols and services. They are also the basis for finding network-aware cross-layer processing algorithms which are capable of exploiting the specific properties of the link error statistics, such as predictability. This document presents the analysis of the radio link errors based on measurements in live Universal Mobile Telecommunication System (UMTS) radio access networks as well as new link error models originating from that analysis. It is shown that the knowledge of the specific link error characteristics leads to significant improvements in the quality of streamed video by applying the proposed novel network- and content-aware cross-layer scheduling algorithms. Although based on live UMTS network experience, many of the conclusions in this work are of general validity and are not limited to UMTS only.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.789-796
• /
• 2013

Next Generation Weapon system from the center of the platform to share information in real-time Network Centric Warfare(NCW: Network Centric Warfare) has been changed. Data link system is defined as a network. That is, all in real-time battlefield information is to enable sharing. Data link system is classified as a precision strike, Monitoring/control, control of a Patriot missile battery systems. These systems are most effective in a Joint warfare and precision strike. Data Link Systems(Data Communications) implementation is accomplished by using the KDLM(Korean Data Link Modem) and Radio Transceiver. KDLM is operated in conjunction with the legacy Radios(re-using fielded HF/VHF/UHF radio systems). In this paper, we describe in terms of KDLM system design. In this paper, the proposed design structure is how to effectively interact with legacy various radio. First, The results provide an analysis of that Dynamic TDMA system and apply modem structure. Radio characteristics data are necessary for an effective TDMA system design. This article analyzes the test results and describes the structure to improve the receive performance.

• Journal of information and communication convergence engineering
• /
• v.16 no.2
• /
• pp.72-77
• /
• 2018

This paper presents a novel channel capacity maximization method for a distorted $2{\times}2$ line-of-sight (LOS) multiple-input multiple-output (MIMO) link. A LOS MIMO link may be distorted by the influence of environmental factors such that the channel capacity of the LOS MIMO link may be degraded. By using the proposed method, the channel capacity of a distorted $2{\times}2$ LOS MIMO link can be the same as that of the ideal $2{\times}2$ LOS MIMO link. The proposed method employs an additional receiver antenna to maximize the channel capacity. In contrast to a $3{\times}2$ LOS MIMO link, a receiver circuit for a third receiving antenna is not necessary. Hence, the receiver for the proposed method is much simpler than that for a $3{\times}2$ LOS MIMO link. We determine the optimal position of the additional receiver antenna analytically. Simulation results show that the channel capacity can approach the ideal using the proposed method.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.553-564
• /
• 2022

Many existing reinforced concrete (RC) structures need to be strengthening for reason such as poor construction quality, low ductility or designing without considering seismic effects. One of the strengthening methods is strengthening technique with eccentrically braced frames (EBFs). The characteristic element of these systems is the link element and its length is very important in terms of seismic behavior. The link element of Y shaped EBF systems (YEBFs) is designed as a short shear element. Different limits are suggested in the literature for the link length. This study to aim experimentally investigate the effect of the link length for the suggested limits on the behavior of the RC frame system and efficiency of strengthening technique. For this purpose, a total of 5 single story, single span RC frame specimens were produced. The design of the RC frames was made considering seismic design deficiencies. Four of the produced specimens were strengthened and one of them remained as bare specimen. The steel YEBFs were used in strengthening the RC frame and the link was designed as a shear element that have different length with respect to suggested limits in literature. The length of links was determined as 50mm, 100mm, 150mm and 200mm. All of the specimens were tested under cyclic loads. The obtained results show that the strengthening technique improved the energy consumption and lateral load bearing capacities of the bare RC specimen. Moreover, it is concluded that the specimens YB-2 and YB-3 showed better performance than the other specimens, especially in energy consumption and ductility.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.7
• /
• pp.794-798
• /
• 2010

Assuming that a wireless link is mostly used at the network edge and the wireless NIC driver keeps monitoring the error rate of its link, this paper proposes an enhanced TCP congestion control, TCP-L (TCP Link-Aware). TCP-L predicts true congestion losses occurred inside the wired link area by utilizing the wireless link error rate. As a result, it mitigates performance degradation caused from TCP congestion control actions when segments losses occur in a wireless link. Experimental results show that TCP-L provides better performance and fairness in lossy wireless links than existing TCP congestion control schemes. Our approach utilizing the characteristic of the link at TCP could be well adapted to new wireless environments such as Cognitive Radio and ACK-less IEEE 802.11, where a frame may be delivered with a very long delay or lost in the link.