• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.989-996
• /
• 2008

The purpose of this study is to provide the basic knowledge for the pattern development of a flared skirt. Two flat pattern (FP) methods, the concentric circle method and the corrected concentric circle method, and a draping were used for pattern making. Using these patterns, skirts were made with lengthwise grain in the centerline. The influence of pattern making method on the silhouette of the flared skirt was evaluated by the hemlines formed at the skirt worn in a dress form. Moreover, the combined influence of pattern making method and cutting direction on the silhouette of the flared skirt was examined with the draping pattern (DP) skirt and a FP skirt with $45^{\circ}$ bias grain in the centerline. The DP skirt had more uniform nodes and formed a stable wave form than the FP skirts throughout the whole hemlines. The number of nodes was reduced with lining in the two FP skirts, whereas the number of nodes was not changed in the DP skirt. The unit wave form of all the skirts by three patterns showed long loop form, and the slope angles of the unit wave form of the two FP skirts were higher than that of the DP skirt. The silhouette of the flared skirt was highly influenced by the shape of the waist circumference line in patterns. The DP skirt with lengthwise grain in the centerline showed good silhouette with uniform nodes and high marking efficiency, compared to the FP skirt with $45^{\circ}$ bias grain in the centerline.

• 한국환경복원기술학회지
• /
• 제13권4호
• /
• pp.65-74
• /
• 2010

This study is for Hanbuk Mountain Range within Gyeonggi province which is to propose the conservation plan by each damage pattern through site survey of the mountain range. The damage patterns are classified by siding, pointing and lining. The total damaged area is 103 areas: The siding pattern is damaged by developing farmland, mineral and quarry mining, dam, large scale development complex and cemetery park; The pointing pattern is including the development of road, transmission tower and way and mountaineering trail; The construction of electricity and communication facility, military facility, mobile communication station, heliport and shelter. The damages by developing road and large scale development complex are the most cause, and military facility, dam and reservoir, and residential area are the main causes, respectively. One of the compromised situation Hanbuk-Mountain Range usage as per section 7 section (18.45%), 12 section (18.45%) is the largest number of compromised has been surveyed, undermine the situation if you look at the usage by the road 25 locations (24.22%), military facilities and dam and reservoir to undermine this 11 established respectively (10.68%) were the most undermine. Therefore, this research propose the conservation plan as follow: first, need to understand, educate and publicize on Hanbuk-Mounatin Range; second, manage through the regulations and ordinance of Gyeonggi province; third build and expand the law for protecting Baekdu-Great Mountain Range.

• 한국터널지하공간학회 논문집
• /
• 제25권4호
• /
• pp.305-330
• /
• 2023

쉴드TBM 터널은 NATM 터널과 달리 라이닝이 세그먼트로 분절되어 있다. 따라서 라이닝에 동일 하중이 발생되어도 NATM 터널 라이닝과 쉴드TBM 터널 라이닝의 응력 분포가 다르게 발생된다. 쉴드TBM 터널에서 라이닝에 발생되는 응력을 분석하는 대표적 방법은 연결부를 고려하지 않는 강성일체법과 링간 이음 및 세그먼트 연결을 고려하는 2링 빔스프링 모델이 있다. 본 연구는 라이닝 분절 Segmentaion을 고려한 Break-joint Mode 해석 방법이지만 세그먼트 라이닝 연결부의 구조적 역할을 고려하지 않고 마찰력 성분인 수직강성과 전단강성 만 도입된 쉘 인터페이스 요소를 이용한 모델링을 적용하여 진동하중 발생 시 라이닝의 응력 및 변위에 대한 응답결과를 분석했다. 토압 등 정적 하중에 대해 천 정부에서 가장 큰 응력이 발생되는 강성일체법과 달리 본 연구의 해석방법에 의해 발생된 세그먼트 라이닝 응력 분포는 세그먼트 연결부가 집중된 천정부 Key 세그먼트에서 가장 작은 응력이 발생하였고 연결부를 경계로 응력의 분포가 뚜렷이 구분되었다. 그리고 정적 해석 결과는 강성일체법에 발생된 라이닝 응력이 본 연구 방법에 의해 발생된 세그먼트 라이닝의 응력에 비해 최대 7배의 큰 응력이 발생되었다. 이러한 결과는 세그먼트 연결부를 고려한 기존의 2링 빔-스프링 모델의 응력분포 양상과 일치하는 결과다. 그러나 열차 진동하중에 대한 응력값은 Break-joint Mode로 해석한 본 연구방법의 응력이 강성일체법에 비해 더 큰 응력을 발생되었다. 이는 짧은 부재들의 조합으로 이루어진 세그먼트 Ring이 원주방향으로 일체로 되어 부재의 길이가 상대적으로 더 긴 강성일체법 결과에 비해 더 작은 응력이 발생되는 정역학적 개념과 상이한 결과다. 진동하중에 대해 Break-joint Mode에서 세그먼트 라이닝에 응력이 더 크게 발생된 원인은 부재의 고유주기, 감쇠비 등 동역학적 요인의 차이보다는 열차 진동하중에 대해 라이닝에 발생되는 변위의 차이에 기인하는 것으로 판단되지만 이에 대한 증명은 추후의 과제로 남겨두었다. 본 연구 방법의 Break-joint Mode를 이용하면 정지상태의 열차 하중에 의해 발생되는 라이닝의 응력과 변위값을 비교하여 쉴드TBM 터널의 충격계수(DIF)를 비교적 간단하게 추정할 수 있다. 본 연구는 쉴드TBM 터널의 Segmentaion을 고려한 3차원 모델링으로 추후 지진파 등 다양한 하중조건의 검토를 통해 기존 해석방법 결과와 비교하여 모델링의 추가적 신뢰성을 확보할 필요가 있다.

• 헤리티지:역사와 과학
• /
• 제56권2호
• /
• pp.80-98
• /
• 2023

조선 말기에 혼례를 마치고 신부가 시댁으로 가면서 가마를 타고 가는데 그 때 가마 위에 벽사의 뜻이 담긴 호피를 덮는 풍습이 있었다. 상류층을 중심으로 호피나 표피를 사용했으나 서민들 사이에서는 호랑이무늬를 그린 모포를 덮었다. 그 모포는 호탄자, 호구, 호구욕 등으로 불리었다. 신부 가마덮개가 처음 사용된 시기는 정확히 알 수 없으나 대략 19세기 말부터 1930년대까지 성행하다 점차 사라졌는데 신식혼례의 등장으로 신부의 가마가 필요 없어졌기 때문으로 추정된다. 호랑이무늬 모포는 신부 가마 위에 덮는 것뿐만 아니라 상 위에 덮거나 바닥에 깔기도 하였는데 모두 혼인식에 사용되었다. 호랑이무늬 모포 9점에 대한 성분 분석 결과 겉감과 안감의 경사는 무명실, 위사에는 모사(毛絲)가 사용되었다. 겉감의 위사에 사용된 모사는 2종류인데 중국의 비미종 양모와 중국 허베이성 카펫용 염소모로 밝혀졌다. 러시아에서 '호랑이 그린 무늬의 담요'가 수입되었다는 것과 중국에서 모물을 사들인 후 우리나라에서 깔개를 만들었다는 내용, 그리고 여러 기법의 모깔개를 제작했다는 사료를 고려해보면 중국과 러시아 등지에서 완제품으로 수입하기도 했고 국내에서 생산하기도 했다는 것으로 추정된다. 실물 조사한 호랑이무늬 모포 13점의 겉감은 직물의 조직과 실꼬임 방향에 따라 6종류가 있으며 안감은 3종류, 그리고 가선은 4종류로 분류되었다. 안감과 겉감은 한 폭을 그대로 사용한 것으로 직물의 폭이 최소 135cm의 광폭으로 직조하였다. 호랑이 무늬를 표현하는 방법은 공판화 기법이다. 빨간색 겉감 위에 호랑이 몸통과 꼬리의 도안을 대고 흰색을 칠한 후 호랑이의 바탕색인 노란색과 얼룩무늬인 갈색, 검은색의 순서로 칠한다. 호랑이무늬는 조금씩 달라서 여러 공방에서 제작된 것으로 추정된다. 호탄자의 무늬는 호피처럼 엎드린 상태로 그렸는데 서 있는 자세도 생겨나고 호랑이무늬는 작아지면서 가장자리에 화려한 꽃무늬를 그려 넣었다. 이같이 호탄자는 무늬에 장식적인 요소가 가미되는 변천을 겪다가 가마덮개로서의 기능이 상실되면서 점차 사라졌을 것으로 여겨진다. 현재 남아 있는 호랑이무늬 모포 중 수입품이 포함되어 있다는 점과 당시 유행이었던 점을 고려하면 여러 생산지에서 제작되었을 것으로 추정된다.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.

• 대한치과보철학회지
• /
• 제41권6호
• /
• pp.732-746
• /
• 2003

Statement of problem. Soft lining materials, also referred to as tissue conditioning materials, tissue heating materials, relining materials, soft liners or tissue conditioners, were first introduced to dentistry by a plastic manufacturer in 1959. Since the introduction of the materials to the dental field, their material properties have been continually improved through the effort of many researchers. Soft lining materials have become widely accepted, particularly by prosthodontists, because of their numerous clinical advantages and ease of manipulation. Unfortunately, few reports have been issued upon the topic of increasing the bond strength between the base metal alloy used in cast denture bases and PMMA soft liner modified with 4-META, nor upon the pattern of debonding and material change in wet environment like a intra oral situation. Purpose. The purposes of this study were comparing the bond strength between base metal alloy used for the cast denture bases and PMMA soft liner modified with 4-META, and describing the pattern of debonding and material property change in wet environment like the intraoral situation. Material and Methods. This study consisted of four experiments: 1. The in vitro measurement of shear bond strength of the adhesive soft liner. 2. The in vitro measurement of shear bond strength of the adhesive soft liner after 2 weeks of aging. 3. A comparison of debonding patterns. 4. An evaluation the Relation time of modified soft liner. The soft liner used in this study was commercially available as Coe-soft (GC America.IL.,USA), which is provided in forms of powder and liquid. This is a PMMA soft liner commonly used in dental clinics. The metal primer used in this study was 4-META containing primer packed in Meta fast denture base resin (Sun Medical Co., Osaka, Japan). The specimens were formed in a single lap joint desist which is useful for evaluating the apparent shear bond strength of adhesively bonded metal plate by tensile loading. Using the $20{\times}20mm$ transparent grid, percent area of adhesive soft liner remaining on the shear area was calculated to classify the debonding patterns. To evaluate the change of the initial flow of the modified adhesive soft liner, the gelation time was measured with an oscillating rheometer (Haake RS150W/ TC50, Haake Co., Germany). It was a stress control and parallel plate type with the diameter of 35mm. Conclusion. Within the conditions and limitations of this study, the following conclusions were drawn as follows. 1. There was significant increase of bond strength in the 5% 4-META, 10% 4-META containing groups and in the primer coated groups versus the control group(P<0.05). 2. After 2 weeks of aging, no significant increase in bond strength was found except for the group containing 10% 4-META (P<0.05). 3. The gelation times of the modified soft liner were 9.3 minutes for the 5% 4-META containing liner and 11.5 minutes for the 10% 4-META liner. 4. The debonding patterns of the 4-META containing group after 2 weeks of aging were similar to those of immediaely after preparation, but the debonding pattern of the primer group showed more adhesive failure after 2 weeks of aging.

• 복식
• /
• 제29권
• /
• pp.117-126
• /
• 1996

As the current stage of the fashion begins to follow the styles of the past the study on the past costume is getting more importance and as the methodolgy of the study the accu-rately approached study through the rehabili-tation of the past cosume is more needed than the simple rearrangement of the historical documents. By this methodology this study can be positioned as a re-creation activity. The results of the study are as follows. 1) Style: The general silhouette is the style to emphasize the waist and to widen skirt at the lower part of the body. The front shows hourglass silhouette but the side shows S-line silhouette. The dress is two-piece composed of bodice and skirt. 2) Color and Fabric: The main color is dull powder blue end the sub color is ivory. The dress is made of wool crepe and cotton and partly silk crepe satin and taffeta. 3) Pattern and sewing: The dress is combined with lining and fabrics, The patterns. or overbodice. The skirt is gored skirt. The skirt is gored skirt. The dress has various effect not only to decorate but also to conceal seams support hemlines nd affect the depth and length of front panel. 4) Datail: The braid black velvet ribbon frill and tucks in bodice skirt sleeves front panel collar cuffs are repeatedly used to dec-orate the dress. Finally the 1902-3 day dress has the characteristics of transitional stag in which the chatacteristics of the costume of 1900s and the remnants of the characteristics of the pre-vious costume style and shows the charac-teristics of day dress well in terms of the style color and fabric pattern and sewing and detail.

• Restorative Dentistry and Endodontics
• /
• 제42권2호
• /
• pp.111-117
• /
• 2017

Objectives: Periapical lesions, including periapical cyst (PC), periapical granuloma (PG), and periapical abscess (PA), are frequently affected by chemical/physical damage during root canal treatment or severe bacterial infection, and thus, the differential diagnosis of periapical lesions may be difficult due to the presence of severe inflammatory reaction. The aim of this study was to make differential diagnosis among PC, PG, and PA under polarizing microscope. Materials and Methods: The collagen birefringence patterns of 319 cases of PC (n = 122), PG (n = 158), and PA (n = 39) obtained using a polarizing microscope were compared. In addition, 6 cases of periodontal fibroma (PF) were used as positive controls. Results: Collagen birefringence was condensed with a thick, linear band-like pattern in PC, but was short and irregularly scattered in PG, and scarce or absent in PA. PF showed intense collagen birefringence with a short, palisading pattern but no continuous band-like pattern. The linear band-like birefringence in PC was ascribed to pre-existing expansile tensile stress of the cyst wall. Conclusions: In this study all PCs (n = 122) were distinguishable from PGs and PAs by their characteristic birefringence, despite the absence of lining epithelium (n = 20). Therefore, the authors suggest that the presence of linear band-like collagen birefringence of the cyst wall aids the diagnostic differentiation of PC from PG and PA.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.620-620
• /
• 2003

The purpose of this study was to see the occurrence of the epithelial ingrowth in the periapical lesion and its relevance with the clinical symptoms. The subjects of this study included 129 specimens which were obtained from the apical surgery during the year of 2001-2002. The patterns of epithelial ingrowth were classified as either as either lining or networking. The clinical records were reviewed and the relevance between the clinical symptoms and the pattern of the epithelial ingrowth were evaluated under the light microscope.(중략)

• 한국가축번식학회지
• /
• 제8권1호
• /
• pp.46-55
• /
• 1984

The purpose of the experiment was to clarify morphologically normal growth pattern of the ductus deference in accordance with the sex maturity of meat-type cockerels. 1. Diameter of lumens in u, pp.r, mid and lower parts of ductus deferens, the most conspicuous enlargement of lumen was observed in the lower part. Heights of epithelial layers of ductus deferens showed abrupt growth at 12 weeks of age with subsequent gradual growth in all the part of u, pp.r, mid and lower, and heights of those at 30 weeks were a, pp.oximately 4 times as large in the u, pp.r and mid parts and 5 times as large in the lower part in contrast to those at 4 weeks of age. Thickness of muscular layer of ductus showed gradual growth in contrast with the diameter of lumen and height of epithelial layer, showing 1.3 times as large in the u, pp.r part, 1.6 times in the mid part and 1.9 times in the lower part at 30 weeks of age in contrast to the thickness at 4 weeks of age. 2. Within 10 weeks after hatching, lining cells of ductus deferens were mainly composed of round cells and columnar cells in simple columnar epithelium. During 10th to 20th week, the lining cells were mainly composed of high columnar cells and round cells in pseudostratified epithelium. From 22nd week, the lining cells were composed of pseudostratified columnar cells. Whereas round cells disa, pp.ared gradually. Enlargement of lumen and pooling of sperms in ductus deferens coincided with the maturation of seminiferous tubules. 3. In simple correlation between the values of testis weight and the values from various measurements in the ductus deferens, there was significant correlation coefficient with each other. 4. In the India ink absorption test, India ink granules were not absorbed on the epithelium of the ductus deferens, but the granules reactive to acid phosphatase a, pp.ared in a line on the free border of each parts of the ductus deferens. The granules reactive to alkaline phosphatase were noted on the luminal border of ductus deferens mainly, but weak reaction showed than acid phophatase were a, pp.ared. The granules reactive to PAS were a, pp.ared mostly near on the free border of hte epithelial cells of ductus deferens. 5. Number of sperm, Indes of sperm vitality and MRT in the different parts of ductus deferens were tended to be somewhat dominant in the mid and lower parts than in u, pp.r part, even though not significant in the statistical analysis. Ratio of sperm abnormality was tended to be relatively high in the u, pp.r part too, and in the sperm of abnormality blunted head was less in number significantly in the mid and lower part than in the u, pp.r part.