• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.83-91
• /
• 2017

In this work, we investigated the recently proposed phase-contrast x-ray imaging (PCXI) technique, the so-called single grid-based PCXI, which has great simplicity and minimal requirements on the setup alignment. It allows for imaging of smaller features and variations in the examined sample than conventional attenuation-based x-ray imaging with lower x-ray dose. We performed a systematic simulation using a simulation platform developed by us to investigate the image characteristics. We also performed a preliminary PCXI experiment using an established a table-top setup to demonstrate the performance of the simulation platform. The system consists of an x-ray tube ($50kV_p$, 5 mAs), a focused-linear grid (200-lines/inch), and a flat-panel detector ($48-{\mu}m$ pixel size). According to our results, the simulated contrast of phase images was much enhanced, compared to that of the absorption images. The scattering length scale estimated for a given simulation condition was about 117 nm. It was very similar, at least qualitatively, to the experimental contrast, which demonstrates the performance of the simulation platform. We also found that the level of the phase gradient of oriented structures strongly depended on the orientation of the structure relative to that of linear grids.

• 복식문화연구
• /
• 제10권6호
• /
• pp.763-780
• /
• 2002

The aim of this research is to analyze Vionnet´s geometric features, which can be regarded as the key formative beauty among the external characteristics of her works. and to thereby establish the theory that her works emitted a time-transcending life force because they were patterns designed based on a geometrical frame of mind. To prove such argument, studies to understand the basic geometrical aspects appearing in her works will be made by taking a look at the general features of geometry, viewing Vionnet´s philosophy for designing, and examining the geometric cutting methods. The period covered in this paper will center mainly on dresses Vionnet made from her very active days in the fashion sector, 1919. till when she retired from the fashion industry, around 1939. What's outstanding about Vionnet´s geometric principle expressed in her works is the unique cutting method that acknowledges the silhouette of the human body as a cubic or three-dimensions concept, through insight of the human body, the mechanics of the materials, and geometry. Vionnet introduced a simple and elegant design by combining geometric figure cuts, such as rectan히es. quadrants, and triangles. Moreover, she created a new sewing structure that plans everything about the materials to the tiniest detail, resulting in producing a softer style With this, Vionnet showed the geometrical correlation can bring about harmony and the beauty of ideal proportion, forming the source of eternal beauty. As discussed so fu, the geometrical characteristics appearing in Vionnet´s works are marked such as spirals, zig-zag lines, asymmetries. panels, gradation, golden proportion, and the mobius-band.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.521-527
• /
• 2010

포장궤도는 토공구간, 교량구간, 터널구간, 분기기구간 등 모든 구간에서 유지보수를 절감할 목적으로 적용한다. 토공구간에 포장궤도를 적용할 경우, 내구성에 가장 큰 영향을 미치는 것은 시공이음매부로서 구조적인 문제는 없으나 슬래브의 불연속으로 인한 단차가 발생하여 장기적인 사용성에 영향을 미칠 가능성이 있다. 따라서 이에 대한 검토를 위하여 실물의 포장궤도를 제작하여 시공이음매부와 연속부에서 가속실험을 실시하였다. 가속실험에서는 각 재하하중별 변위와 토압에 대한 경향을 비교함으로써 시공이음매부에서의 취약도를 평가하고자 하였다.

• 한국전자통신학회논문지
• /
• 제8권8호
• /
• pp.1241-1246
• /
• 2013

현재 일반적인 반송 장치에서는 전기자를 반송 경로 전장에 배치하는 지상 1차측 시스템이 적용되고 있다. 하지만 이러한 시스템을 장거리 반송 장치에 적용하면 초기 설치비용과 제작시간이 상승하는 문제점이 발생한다. 이러한 문제점을 해결하기 위해 전기자를 분산시켜 배치하는 방식이 제시되고 있다. 하지만 전기자 분산배치 방식은 전기자가 존재하지 않는 구간에서 외란 발생 시 가동자가 정지할 수 있으며 이 때 전기자에 의한 제어가 불가능하게 되어 가동자를 이동 시킬 수 없는 문제점을 내재하고 있다. 따라서 이러한 문제점을 해결하기 위한 전기자 간격 결정이 매우 중요하다. 또한 전기자를 분산배치 할 경우 단부가 발생하게 된다. 이는 가동자가 전기자에 진입 또는 반출 시에 코깅력을 크게 발생시켜 추력 맥동의 원인이 되며, 소음과 진동을 발생시키므로 저감하여야 한다. 따라서 본 논문에서는 전기자를 분산 배치함에 따라 존재하는 단부 코깅력을 유한요소법을 이용한 2-D 수치해석을 통해 파악하고 이를 최소화하기 위한 전기자 간격을 도출하고자 한다.

• Advances in nano research
• /
• 제3권2호
• /
• pp.97-109
• /
• 2015

Citrate ion is a commonly used reductant in metal colloid synthesis, undergoes strong surface interaction with silver nanocrystallites. The slow crystal growth observed as a result of the interaction between the silver surface and the citrate ion makes this reduction process unique compared to other chemical and radiolytic synthetic methods. The antimicrobial effects of silver (Ag) ion or salts are well known, but the effects of citrate coated Ag nanoparticles (CAgNPs) are scant. Herein, we have isolated biofilm causative bacteria and fungi from drinking water PVC pipe lines. Stable CAgNPs were prepared and the formation of CAgNPs was confirmed by UV-visible spectroscopic analysis and recorded the localized surface plasmon resonance of CAgNPs at 430 nm. Fourier transform infrared spectroscopic analysis revealed C=O and O-H bending vibrations due to organic capping of silver responsible for the reduction and stabilization of the CAgNPs. X-ray diffraction micrograph indicated the face centered cubic structure of the formed CAgNPs, and morphological studies including size (average size 50 nm) were carried out using transmission electron microscopy. The hydrodynamic diameter (60.7 nm) and zeta potential (-27.6 mV) were measured using the dynamic light scattering technique. The antimicrobial activity of CAgNPs was evaluated (in vitro) against the isolated fungi, Gram-negative and Gram-positive bacteria using disc diffusion method and results revealed that CAgNPs with 170ppm concentration are having significant antimicrobial effects against an array of microbes tested.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.87-95
• /
• 2012

In recent years, laser-arc hybrid welding has begun to be adopted for assembly welding of automotive bodies and parts, because the hybrid welding process can weld lapped steel sheets having a larger gap than is possible with laser welding. In this paper, to predict the twist deformation by the hybrid welding when brackets are welded in B pillar of a passenger car, the residual stress using CAE is analyzed and the deformation result of CAE is compared with the measured deformation. First of all, after modeling heat source as intended to be expressed with laser-arc hybrid welding method, heat source fitting is done with welding conditions and a section of welding part obtained through specimen test. In case of heat source functions, laser used conical source and arc used double ellipsoid source. Through the local model analysis, elements which are located in the center of the model are selected. The elements are called WME(Welding Macro Element). This WME is extruded in the welding lines and welding phenomenon of complex parts is accomplished. The deformation amount after hybrid welding is got through a simulation, the validity of simulation is verified by measuring the panel and comparing with the simulation result.

• 한국농공학회논문집
• /
• 제55권6호
• /
• pp.101-112
• /
• 2013

Shuttle Radar Topography Mission Digital Elevation Model (SRTM DEM) offers opportunities to make advances in many research areas including hydrology by providing near-global scale elevation measurements at a uniform resolution. Its wide coverage and complimentary online access especially benefits researchers requiring topographic information of hard-to-access areas. However, SRTM DEM also contains inherent errors, which are subject to propagation with its manipulation into analysis outputs. Sensitivity of hydrologic analysis to the errors has not been fully understood yet. This study investigated their impact on estimation of hydrologic derivatives such as slope, stream network, and watershed boundary using Monte Carlo simulation and spatial moving average techniques. Different amount of the errors and their spatial auto-correlation structure were considered in the study. Two sub-watersheds of Geum and Deadong River areas located in South and North Korea, respectively, were selected as the study areas. The results demonstrated that the spatial presentations of stream networks and watershed boundaries and their length and area estimations could be greatly affected by the SRTM DEM errors, in particular relatively flat areas. In the Deadong River area, artifacts of the SRTM DEM created sinks even after the filling process and then closed drainage basin and short stream lines, which are not the case in the reality. These findings provided an evidence that SRTM DEM alone may not enough to accurately figure out the hydrologic feature of a watershed, suggesting need of local knowledge and complementary data.

• Journal of Multimedia Information System
• /
• 제9권2호
• /
• pp.113-120
• /
• 2022

Mongolian folk songs are inspired by Mongolian labor songs and are classified into long and short songs. Mongolian long songs have ancient origins, are rich in legends, and are a great source of folklore. So it was inscribed by UNESCO in 2008. Mongolian written literature is formed under the direct influence of oral literature. Mongolian long song has 3 classes: ayzam, suman, and besreg by their lyrics and structure. In ayzam long song, the world perfectly embodies the philosophical nature of world phenomena and the nature of human life. Suman long song has a wide range of topics such as the common way of life, respect for ancestors, respect for fathers, respect for mountains and water, livestock and animal husbandry, as well as the history of Mongolia. Besreg long songs are dominated by commanded and trained characters. In this paper, we proposed a method to classify their 3 types of long songs using machine learning, based on their lyrics structures without semantic information. We collected lyrics of over 80 long songs and extracted 11 features from every single song. The features are the name of a song, number of the verse, number of lines, number of words, general value, double value, elapsed time of verse, elapsed time of 5 words, and the longest elapsed time of 1 word, full text, and type label. In experimental results, our proposed features show on average 78% recognition rates in function type machine learning methods, to classify the ayzam, suman, and besreg classes.

• 천문학논총
• /
• 제27권4호
• /
• pp.243-248
• /
• 2012

Nearby spiral galaxies M101 and M81 are considered to have undergone a galaxy-galaxy interaction. M101 has experienced HI gas infall due to the interaction. With AKARI far-infrared (IR) photometric observations, we found regions with enhanced star forming activity, which are spatially close to regions affected by the interaction. In addition, the relation between the star formation rate (SFR) and the gas content for such regions shows a significant difference from typical spiral arm regions. We discuss possible explanations for star formation processes on a kiloparsec scale and the association with interaction-triggered star formation. We also observed the compact group of galaxies Stephan's Quintet (SQ) with the AKARI Far-infrared Surveyor (FIS). The SQ shows diffuse intergalactic medium (IGM) due to multiple collisions between the member galaxies and the IGM. The intruder galaxy NGC 7318b is currently colliding with the IGM and causes a large-scale shock. The 160 micron image clearly shows the structure along the shock ridge as seen in warm molecular hydrogen line emission and X-ray emission. The far-IR emission from the shocked region comes from the luminous [CII]$158{\mu}m$ line and cold dust (~ 20 K) that coexist with molecular hydrogen gas. Survival of dust grains is indispensable to form molecular hydrogen gas within the collision age (~ 5 Myr). At the stage of the dusty IGM environment, [CII] and $H_2$ lines rather than X-ray emission are powerful cooling channels to release the collision energy.

• 천문학회보
• /
• 제36권2호
• /
• pp.61.1-61.1
• /
• 2011

We have performed simultaneous observations at 22GHz and 43GHz on AGNs hosted by elliptical galaxies using KVN radio telescope. We have constructed the sample, based on two major surveys in radio and optical band, i.e. Faint Images of the Radio Sky at Twenty-Centimeters (FIRST) and Sloan Digital Sky Survey (SDSS) DR7, respectively. We restricted the redshift range 0.01 < z < 0.06 and the absolute magnitude Mr < -19.4 in order to satisfy volume limited sample. We also checked clear detection of four distinctive emission lines ([NII], [OIII], $H{\alpha}$, $H{\beta}$) so as to utilize on BPT diagram, distinguishing AGNs from star-forming galaxies. Elliptical galaxies have been selected by visual inspection making use of SDSS optical images. Then, we cross-matched the elliptical galaxies with FIRST detections. About 35% of the galaxies have been detected throughout KVN observations. We derive spectral index, applying the flux of different radio frequencies from FIRST (1.4GHz) and KVN (22GHz) and classify into steep, flat or inverted spectrum. We have found that most of the detected galaxies have flat spectrum while the rest of them have steep spectrum. This implies that a number of detected galaxies might have compact structure associated with the central region of the galaxies. The relation between black hole mass and radio luminosity has shown relatively tighter correlation in high frequency than in low frequency, which confirms that high frequency in radio band is appropriate to study the center of the galaxies.