• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.622-628
• /
• 2013

Due to the development of compounding technology, there is a considerable increase in the number of high performance rubbers in the world. Accordingly, there are rapid growing requests about high performance tires such as UHP tire and Run-flat tire. However, it is extremely difficult to investigate the friction coefficient of tire tread rubbers. An alternative solution must be developed with the reliability of high-speed linear friction test machines. The use of friction test machines can be expected to improve rubber friction researches. In this paper, we propose a new kind of high-speed linear friction test machine. We have designed and manufactured various mechanisms for friction tests. The final goals are to design and manufacture friction test machines that can investigate friction coefficients efficiently and rapidly. The performance of the proposed high-speed linear friction test machine is evaluated experimentally; however additional study should be necessary for safer and more reliable experimentation.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.64-71
• /
• 2001

In general, precise linear actuators using piezoelectric element are driven by friction force. Exact understanding of friction plays an important role in analysis and control of a motor. In this research, we designed a precise linear actuator using piezoelectric elements and observed its dynamic characteristics. By varying phase angle difference and amplitudes of the sinusoidal waves that are driving inputs, we can know that it is possible to control moving direction and distance of the slider. As preload is increased, its moving distance is decreased. And also, we have modeled a precise linear actuator using stick slip friction models such as classical, Karnopp. and reset integrator. Finally, by comparing the results of simulation and experiment, it was verified that the model is well designed.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.761-766
• /
• 2013

A precision linear motion table plays a crucial role in manufacturing systems used in various industries such as machine tools, semiconductors, and nanofabrication. In particular, one of the most typical mechanisms for a linear motion table is to use a ballscrew and LM guides. However, this mechanism is inevitably influenced by friction because of the relative motion in its joint regions. One of the most complex phenomena in friction is the hysteresis behavior of dynamic friction, which was compared with the steady dynamic friction that was presented using a Stribeck curve in this study. Therefore, we investigated the dynamic friction and its hysteresis behavior using a miniaturized linear table equipped with a ballscrew and LM guides that were lubricated with grease. Subsequently, it could be seen that hysteresis could be considered a time delay after zero-velocity crossing and that it was influenced by acceleration.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.18-24
• /
• 2006

This paper proposes a LuGre Model-Based Neural Network (MBNN) friction compensation algorithm for a linear motor stage. For matching the friction phenomena in both the motion-start region and the motion-reverse region, the LuGre dynamic model is employed into the proposed compensation algorithm. After training of the model-based neural network is completed, the estimated friction for compensation is obtained. From the obtained result we find that the new structure gains advantage over the non-friction compensation system on the performance of the compensator in both regions. The proposed compensator is evaluated and compared experimentally with an uncompensated system on a microcomputer controlled linear motor tracking system in the final section of the paper. The experimental results show the improvement on the maximum velocity error and the root mean square tracking error in the motion-start region ranges from 34% to 53% and from 53% to 75% respectively, and in the motion-reverse region from 48% to 65% and from 79% to 90% respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1828-1831
• /
• 2003

There are various sources causing a position error in a linear motor. This paper focuses on error sources from rotational motions of a table and friction. Rotational errors occur due to imperfections during manufacturing and/or assembly of guide ways, and cause a position error at locations of interest. Friction is another factor deteriorating the position error due to its highly nonlinear behavior. The position error of the linear motor was about 20∼30$\mu\textrm{m}$. After compensating the position errors due to rotational error motions and friction. the remaining errors become about 6～8$\mu\textrm{m}$ and 2～3$\mu\textrm{m}$, respectively. It is shown that the positional accuracy of a linear can be greatly improved by compensating the two error sources.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.760-766
• /
• 2010

본 논문에서는 유압 비례 제어 밸브로 구동되는 유압모터 부하계에 존재하는 정지마찰토크와 점성마찰토크를 해석하였다. 이에 기초 실험으로 유압시스템의 에너지인 압력과 유량에 대한 특성실험을 수행하였고, 공압브레이크 시스템을 이용하여 브레이크 압력의 변화를 인가하여 마찰토크의 변화를 실험하였다. 비선형마찰과 선형마찰에 대한 해석은 유압 시스템의 마찰특성에 대하여 수행하였다.

• 한국정밀공학회지
• /
• 제32권5호
• /
• pp.423-429
• /
• 2015

Linear motion (LM) ball guides have good accuracy and high efficiency. They are widely applied for precision machinery such as machine tools, semiconductor fabrication machines and robots. However, friction force incurs heat between the balls and grooves. Thermal expansion due to the heat deteriorates stiffness and accuracy of the LM ball guides. For accurate estimation of stiffness and accuracy during the linear motion, friction models of LM ball guides are required. To formulate accurate frictional models of LM ball guides according to load and preload conditions, rolling and viscous frictional analyses have been performed in this paper. Contact loads between balls and grooves are derived from Hertzian contact analysis. Contact angle variation is incorporated for the precision modeling. Viscous friction model is formulated from the shear stress of lubricant and the contact area between balls and grooves. Experiments confirm validity of the developed friction model for various external load and feedrate conditions.

• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.174-180
• /
• 1996

The friction is one of the nonlinearities to be considered in the precise position control of a system which has electromechanical components. The friction has complicated nonlinear characteristics and depends on the velocity, the position and the time. The conventional fixed friction compensator and the controller based on linear control theory may cause the steady state position error or oscillation. The plant to be controlled in this study is a positioning system with a linear brushless DC motor(LBLDCM). The system behaves like a 4th-order model including the compliance and the friction. In this study, the plant model is simplified to a 2nd-order model to reduce the computation in on- line estimation. Also, to reduce the computation time, only the friction is estimated on-line while the mass and the viscous damping coefficient are fixed to the values obtained from off-line estimation. The validity of the proposed scheme is illustrated with the computer simulation and the experiment where the friction is compensated by using the estimation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2399-2401
• /
• 2001

This Paper presents a positioning control method of the LBLDCM(Linear Brushless DC Motor) under friction. The friction may cause steady state position error. So it is necessary to consider friction effect for precision positioning control. The proposed control method uses disturbance observer algorithm and friction compensation. The experimental results of the proposed control method based on the disturbance observer are presented to show its effectiveness.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.695-700
• /
• 2003

This paper dealt with friction-induced vibrations in engineering practice, specifically arising at the moment of counterturn of two friction surfaces. The harshness of the vibrations are attributed to the sharp change of the friction coefficients from kinetic to static near zero relative velocity, which is one of the examples of the stick slip. But the experimental results and numerical analysis of piston and cylinder operation showed that transition of the friction coefficient from kinetic to static is insignificant in vibrations. Dry friction itself dominates the harshness of vibrations. This study shows that how dry friction triggers the vibrations and demonstrates the effect of sharp transition from kinetic to static friction coefficient on the vibrations.