• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.80-82
• /
• 2005

This paper presents the dynamic characteristics of a linear brushless DC(BLDC) motor with permanent magnet excitation for the precision conveyor according to the load condition. In order to investigate the accurate dynamic performance of tile linear BLDC motor driving with 6 step inverter- fed, finite element techniques coupling with external circuit models, together with the simultaneous simulation of motion of the mover system, arc proposed. The results of finite element analysis arc compared to the experimental ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.9-11
• /
• 1999

A brushless and slotless DC linear motor(LDM)employing a movable set of neodymium-iron-boron type of magnets has high performances in advantages of large thrust per weights and accurate position control. But the Moving Magnet LDM produces thrust ripples owing to mainly end-effects, shape and magnetization of permanent magnets and so on. This paper represents the improvements of thrust ripples using the finite elements methods and phase control topology.

• 한국정보통신학회논문지
• /
• 제10권4호
• /
• pp.659-666
• /
• 2006

서보 모터는 컴퓨터와 센서로부터 오는 지령에 대해 정밀한 모션제어 즉, 정확한 속도조절과 위치 잡기를 수행함으로써 자동화 시스템에서 중요한 부분으로 사용된다. 특히, 선형추진 BLDC모터는 볼스크류, 타이밍 벨트, 랙/피니온과 같은 마찰 유도 전달 메카니즘들과 연결을 갖는 회전식 서보모터들에 비해 다양한 장점들을 갖는다. 본 논문은 정현파 구동형 선형 추진 BLDC모터의 동특성과 출력들로부터 얻어지는 정보를 이용하여 미지의 전동기 계통 파라미터들을 추정하는 방식을 제안한다. 추정된 파라미터들은 제어기와 외란 관측기의 이득을 조절하는데 사용될 수 있다. 이러한 목적을 이루기 위해 고성능의 디지털신호처리프로세서로 계자기준제어(FOC)기법을 구현하기 위해 설계된 TMS320F240을 선형 BLDC 서보 전동기의 제어기로서 사용한다. 이 서보전동기 응용 전용의 DSP는 A/D Converter와 PWM 발생부, 다수의 IO Port를 내장하고 있어 서보모터 제어기에 중요한 역할을 담당하게 된다. 이 선형 BLDC 서보 전동기 시스템은 또한 IPM 구동기와 홀센서 타입의 전류센서모듈 그리고 게이트 구동 신호와 고장 신호들의 전기적 절연을 위한 광결합 모듈을 포함한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1017-1018
• /
• 2011

This paper deals with a magnetic field analysis on brushless DC(BLDC) motor with radial magnetization permanent magnet. In order to analyze the magnetic field, multi-layer analysis based on space harmonics method is employed. Finally, the analytical results are validated by non-linear Finite Element Analysis(FEA).

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.25-29
• /
• 2001

The BLDCM (Brushless DC Motor) characterized by linear torque to current, and speed to voltage has low acoustic noise, and fast dynamic response. Moreover, it has high power density with high proportion of torque to inertia in spite of small size drive. But, it produce torque ripple due to the motor inductance components in stator windings and back-EMF, when armature current is commutated. Therefore, it is difficult to apply the BLDCM to a precision servo drive system. In this paper is proposed to a new current control algorithm with using fourier series coefficients can minimize torque ripple due to the phase current commutation of BLDCM. Simulation and Experimental results prove the effectiveness the proposed algorithm through comparison with the conventional used unipolar PWM method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.197-199
• /
• 2006

This paper presents a analytical field solutions for the general class of Linear Brushless DC(LBLDC) motors with PM mover and 3-phase winding stator. In our magnetic field analysis, we have adopted an approach which can treat both magnetized material and winding from the each field analysis by magnetic vector potential considering 2-Dimensional slot modeling. Therefore, we give accurate analytical formulas and object function for design and parameters estimation by its magnetic field.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.336-339
• /
• 1990

This paper discusses the application of VSCS(Variable Structure Control System) to position control of a trapezoidal type brushless DC motor. In order to simplify the overall control system and to improve the robustness, a new switching function which is composed of linear combination of only measurable state variables Sr(x) and Sr(x) is defined. The proposed new switching function is implemented using a digital signal processor(DSP). A general PWM amplifier is replaced by an ON-OFF pattern generator for the hardware simplification and digitalization. Experimental results are given to demonstrate the validity of the proposed control method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.466-469
• /
• 1995

This paper presents a design and performance of the 6 D.O.F linear motion table with a magnetic bearing suspension. The linear positioning of the table with a 150mm stroke is driven by a brushless DC Linear motor and the other attitudes of the stage are controlled by the analog PD controller with magnetic bearing actuators. Each magnetic bearing unit which consists of 3 electromagnets, 3 capacitance probes and 3 backup bearings affords controlled forces by detecting the air gap between the probes and guideways. An integral type capacitance probe amplifier is equipped on the upper plate of the table so that the probe line to the probe amplifier can be shorter therefore the problems due to the stray capacitance and noise can be reduced. Form the pitch-yaw errormeasured by the autocollimator, the vertical and horizont straightness errors of the table are derived that they are maintained below 1.mu. m over 100mm stroke. The positioning accuracy of the linear motion is maintained below 2 .mu. m and the repeatability error is below 1 .mu. m

• 대한기계학회논문집A
• /
• 제31권12호
• /
• pp.1173-1179
• /
• 2007

In recent years, research to machine large-surface micro-features has become important because of the light guide panel of a large-scale liquid crystal display and the bipolar plate of a high-capacity proton exchange membrane fuel cell. In this study, in order to realize the systematic design technology and performance improvements of an ultra-precision machine for machining the large-surface micro-features, a structural characteristic analysis was performed using its virtual prototype. The prototype consisted of gantry-type frame, hydrostatic feed mechanisms, linear motors, brushless DC servo motor, counterbalance mechanism, and so on. The loop stiffness was estimated from the relative displacement between the tool post and C-axis table, which was caused by a cutting force. Especially, the causes of structural stiffness deterioration were identified through the structural deformation analysis of sub-models.

• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.181-187
• /
• 1996

A frictionless positioning device using cone-shaped active magnetic bearings(AMBs) is developed, which is driven by a brushless DC motor equipped with resolver. The cone-shaped AMB feature that the structure is simple and yet the five d.o.f. rotor motion is controlled by four magnet pairs. A linearized dynamic model, which accounts for the relationship between input voltage and output current in the cone-shaped magnet, is developed and the azimuth motion of the frictionless positioning device is modeled as the second order system. The feedback controller is designed by using linear quadratic regulator with integral action optimal control law so that the cone-shaped AMB system is stabilized and the frictionless positioning device gets the zero steady state. It is observed that the linearized dynamic model is adequate and the frictionless positioning device can achieve the tracking accuracy within the sensor resolution.