• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.609-617
• /
• 2017

Railways are one of the safest and most important transportation systems in the world. On the other hand, due to the increasing complexity of the railway system and the running distance of rail vehicles, railway accidents occur continuously every year. In particular, in the case of high-speed trains and freight trains, if the function of the axle bearing is lost due to abnormal overheating of the axle box bearing, the load on the axle becomes uneven. Therefore, abnormal overheating in the train axle box bearings can cause serious accidents or derailments. For this purpose, a Hot Box Detector (HBD) was installed in the track side of a high speed line to detect abnormal overheating. This paper proposes an EWMA technique-based axle temperature monitoring method to detect abnormal overheating quickly and efficiently. A statistical design of the proposed method was also performed. The proposed method has better performance compared to the current method in the case of abnormal overheating and the performance is improved by approximately 170% at the maximum.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.10
• /
• pp.87-93
• /
• 1994

Ohmic contacts between Au and p-HgHg_{0.7}Cd_{0.3}Te$ with low specific contact resistance have been obtained. The contact region of the wafer is first pre-heated for 5 seconds in a rapid thermal processing equipment. The temperature reaches a maximum value of about 200$^{\circ}C$ at the end of the 5 seconds. Next, a thin Au film is formed on the contact region by immersing the sample in AuCl$_{3}$ solution. the sample is then post-annealed in the same condition as the pre-heating after Pb/In pad metals are deposited on the electroless Au contacts. The specific contact resistance measured by transmission line model is 5${\times}10^{-3}{\Omega}cm^{2}$ at 80K. RBS and differential Hall measurement data suggest that the above low resistance ohmic contact is ascribed to surface traps and increased gold diffusion rate.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.65-73
• /
• 2013

Ground-coupled heat pump system has attracted attention as a promising renewable energy technology due to its improving energy efficiency and eco-friendly mechanism for space cooling and heating. Pipes buried in the ground play a role of direct thermal interaction between circulating fluid inside the pipe and surrounding soils in the geothermal exchange system. However, both complexities of turbulent flow coupling thermal-hydraulic phenomena and very long aspect ratio of the pipe make it difficult to model the heat exchange system directly. Energy balance for fluid flow inside the pipe was derived to model thermal-hydraulic phenomena, and one-dimensional pipe element was proposed through Galerkin formation and time integration of the equation. Developed element is combined to pre-developed FEM code for THM phenomena in porous media. Numerical results of Thermal Response Test showed that line-source model overestimates equivalent thermal conductivity of surrounding soils due to thermal interaction between adjacent pipes and finite length of the pipe. Thus, inverse analysis for the TRT simulation was conducted to present optimal transformation matrix with utmost convergence.

• IMMUNE NETWORK
• /
• v.2 no.4
• /
• pp.195-201
• /
• 2002

Background: IgE is closely related to the development of allergies. However, the poor relationship between the specific IgE level and the severity of allergic diseases suggests the possibility of functionally different IgE isoforms. With this in mind, rat basophilic leukemia (RBL)-2H3 activation was analyzed with each type of rat IgE for two parameters, exocytosis and IL-4 mRNA production. RBL-2H3 has been well documented in the rat mucosal mast cell line. Methods: RBL-2H3 cells sensitized with each kind of rat IgE was activated by cross-linking FcRI with B5 (monoclonal anti-rat IgE mouse IgG antibodies). The RBL-2H3 exocytosis was measured by analyzing the ${\beta}$-hexosaminidase level, and the level of IL-4 mRNA synthesis was analyzed using semiquantitative RT-PCR. Rat IgE, which was produced by a parasite infection (REP), was prepared using either Paragonimus westermani metacercariae (REP-PW) or Anisakis simplex third stage larvae (REP-AS). A rat IgE prototype of IR162 was prepared by a peritoneal injection of immunocytoma. Results: The level of exocytosis showed a linear relationship with the rat IgE concentration when REP-PW or REP-AS was applied. However, it exhibited a biphasic response with IR162. In addition, the time course of heating at $56^{\circ}C$ illustrated the similarity between REP-PW and REP-AS, which differed from that of IR162. In contrast, the level of IL-4 mRNA synthesis in the RBL-2H3 cells with IR162 was comparable to that of either REP-PW or REP-AS. Conclusion: These results suggest that functionally different rat IgE isoforms exists in RBL-2H3 exocytosis.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2018

While the number of passengers using urban railroads is increasing day by day, the number of complaints from passengers is also increasing. In order to resolve problems caused by poor communication between urban railroad officials and passengers in this paper. An IOS application using the Internet of Things (IoT) technology is proposed for providing safety and comfort temperature service(s) and for taking prompt action(s) of passengers complaints. In this proposal system, the temperature & humidity sensors were placed in a suitable location within the train. At the same time, transferring measurements to the remote server, allowing passengers to request their desired temperature through the IOS Application. Like this based on the collected data, I suggest a system that urban railroad officials can control temperature & humidity of the train. The proposed system was implemented by the Gwangju Metro Line 1 to validate its effectiveness.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.80.1-80.1
• /
• 2017

We present preliminary results of KVN single dish telescope observations of 80 dense cores in the Orion molecular cloud complex which contains the Orion A, B, and ${\lambda}$ Orionis cloud. We investigate the behavior of the different molecular tracers and look for chemical variations of cores in the three clouds in order to systematically investigate the effects of stellar feedback. The most commonly detected molecular lines (with the detection rates higher than 50%) are N2H+, HCO+, H13CO+, C2H, HCN, and H2CO. The detection rates of dense gas tracers, N2H+, HCO+, H13CO+, and C2H show the lowest values in the ${\lambda}$ Orionis cloud. We find difference between molecular D/H ratios and N2H+/H13CO+ abundance ratios towards different clouds, and between protostellar cores and starless cores. Eight starless cores in the Orion A and B clouds exhibit high deuterium fractionations, larger than 0.10, while in the ${\lambda}$ Orionis cloud, no cores reveal the high ratio. These chemical properties could support that cores in the ${\lambda}$ Orionis cloud are affected by the photo-dissociation and external heating from the nearby H II region, which is a hint of negative stellar feedback on core formation. The striking difference between the [N2H+]/[H13CO+] ratios leads us to suggest that there are significant evolutionary differences between the Orion A/B and ${\lambda}$ Orionis clouds. In order to examine whether starless cores can be candidates of pre-stellar cores, we compared the core masses estimated from the 850 um emission to their Virial masses calculated from the N2H+ line data and find that most of them are not gravitationally bound in the three clouds.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.28-33
• /
• 2002

The characteristics of hull-pieces are large quantity, comparatively large piece-size, and different each shape. For the more, in the forming process(including Line-Heating Process) of curved hull pieces, shape checking processes including initial shape measurement and forming shape measurement of the each pieces are needed to achieve a given accuracy. So, the forming process of large curved hull pieces needs efficient measurement and comparison technique to check the shape and ensure the forming-accuracy In this paper, we try to construct integrated S/W, H/W system for efficient measurement and comparison of large curved hull pieces, which can apply to above forming environment.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.75-82
• /
• 2008

Flame bending has been extensively used in the shipbuilding industry for hull plate forming In flame bending it is difficult to obtain the desired shape because the residual deformation dependson the complex temperature distribution and the thermal plastic strain. Mechanical bending such as reconfigurable press forming multi-point press forming or die-less forming has been found to improve the automation of hull plateforming because it can more accurately control the desired shape than line heating. Multi-point forming is a process in which external forces are used to form metal work-pieces. Therefore it can be a flexible and efficient forming technique. This paper presents an optimal approach to determining the press-stroke for multi-point press forming of curved shapes. An integrated configuration of Finite element analysis (FEA) and spring-back compensation algorithm is developed to calculate the strokes of the multi-point press. Not only spring-back is modeled by elastic plastic shell elements but also an iterative algorithm to compensate the spring-back is applied to adjust the amount of pressing stroke. An iterative displacement adjustment (IDA) method is applied by integration of the FEA procedure and the spring-back compensation work. Shape deviation between the desired surface and deform￡d plate is minimized by the IDA algorithm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1667-1673
• /
• 2017

Antibiotics have long been of great benefit for people, both in the medical treatment of human disease and in animal food where they improve the growth performance and feed utilization during animal production. Antibiotics as in-feed supplements affect all stages of pork production, including the gestation, nursing, growing, and finishing stages, although the effects show stage-dependent differences. However, the use of antibiotics in animal feed has become a worldwide concern. This review describes why sub-therapeutic levels of antibiotic additives in animal feed have become an integral part of animal feeding programs for more than 70 years, particularly in pork production. It also discusses the threat of the long-term use of sub-therapeutic levels of antibiotics in pork production. In recent years, the effectiveness of in-feed antibiotics has tended to decrease. This review analyzes this change from various perspectives. First, the equipment used at pig farms has improved dramatically and is more sanitary. Worldwide, more pig farms use pig farrowing crates, gestation crates, piglet nursery crates, flooring devices, piggery ventilation and cooler systems, automatic pig feeders, piggery heating equipment, and artificial insemination systems. In addition, scientists have replaced the use of antibiotics with organic acids, fermented mash, probiotics, prebiotics, minerals, oligosaccharides, enzymes, herbs/flavors, and protein/amino acids, and have improved management and husbandry techniques. In addition, animal welfare legislation has been aimed at improving the quality of the floors and living space, ensuring that animals have permanent access to fresh water, and setting a minimum weaning age. Finally, the prospects and the possibility of replacing antibiotics in pork production are described, in line with recent research results.

• Journal of Korean Academy of Nursing
• /
• v.37 no.7
• /
• pp.1061-1072
• /
• 2007

Purpose: The purpose of this study was to compare the effects of intravenous fluid warming and skin surface warming on peri-operative body temperature and acid base balance of abdominal surgical patients under general anesthesia. Method: Data collection was performed from January 4th, to May 31, 2004. The intravenous fluid warming(IFW) group(30 elderly patients) was warmed through an IV line by an Animec set to $37^{\circ}C$. The skin surface warming(SSW) group(30 elderly patients) was warmed by a circulating-water blanket set to $38^{\circ}C$ under the back and a 60W heating lamp 40 cm above the chest. The warming continued from induction of general anesthesia to two hours after completion of surgery. Collected data was analyzed using Repeated Measures ANOVA, and Bonferroni methods. Results: SSW was more effective than IFW in preventing hypothermia(p= .043), preventing a decrease of $HCO_3{^-}$(p= .000) and preventing base excess(p= .000) respectively. However, there was no difference in pH between the SSW and IFW(p= .401) groups. Conclusion: We conclude that skin surface warming is more effective in preventing hypothermia, and $HCO_3{^-}$ and base excess during general anesthesia, and returning to normal body temperature after surgery than intravenous fluid warming; however, skin surface warming wasn't able to sustain a normal body temperature in elderly patients undergoing abdominal surgery under general anesthesia.