• ETRI Journal
• /
• v.22 no.2
• /
• pp.11-19
• /
• 2000

If the right and left signals of a binaural sound recording are reproduced through loudspeakers instead of a headphone, they are inevitably mixed during their transmission to the ears of the listener. This degrades the desired realism in the sound reproduction system, which is commonly called 'cross-talk.' A 'cross-talk canceler' that filters binaural signals before they are sent to the sound sources is needed to prevent cross-talk. A cross-talk canceler equalizes the resulting sound around the listener's ears as if the original binaural signal sound is reproduced next to the ears of listener. A cross-talk canceler is also a solution to the problem-how binaural sound is distributed to more than 2 channels that drive sound sources. This paper presents an effective way of building a cross-talk canceler in which geometric information, including locations of the listener and multiple loudspeakers, is divided into angular information and distance information. The presented method makes a database in an off-line way using an adaptive filtering technique and Head Related Transfer Functions. Though the database is mainly concerned about the situation where loudspeakers are located on a standard radius from the listener, it can be used for general radius cases after a distance compensation process, which requires a small amount of computation. Issues related to inverting a system to build a cross-talk canceler are discussed and numerical results explaining the preferred configuration of a sound reproduction system for stereo loudspeakers are presented.

• BMB Reports
• /
• v.49 no.3
• /
• pp.149-158
• /
• 2016

Plants have evolved a vast chemical cornucopia to support their sessile lifestyles. Man has exploited this natural resource since Neolithic times and currently plant-derived chemicals are exploited for a myriad of applications. However, plant sources of most high-value natural products (NPs) are not domesticated and therefore their production cannot be undertaken on an agricultural scale. Further, these plant species are often slow growing, their populations limiting, the concentration of the target molecule highly variable and routinely present at extremely low concentrations. Plant cell and organ culture constitutes a sustainable, controllable and environmentally friendly tool for the industrial production of plant NPs. Further, advances in cell line selection, biotransformation, product secretion, cell permeabilisation, extraction and scale-up, among others, are driving increases in plant NP yields. However, there remain significant obstacles to the commercial synthesis of high-value chemicals from these sources. The relatively recent isolation, culturing and characterisation of cambial meristematic cells (CMCs), provides an emerging platform to circumvent many of these potential difficulties.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2001

The present study investigated the effects of experimental parameters on the thermal characteristics of an in-line 6x1 array of discrete heat sources for a test multichip module using water, PF-5060 and paraffin slurry. The parameters were heat flux of 10-40W/$cm^2$. Reynolds number of 3,000~20,000 and mass fraction up to 10% for paraffin slurry The size of paraffin slurry was within 10~40$\mu$m before and after experiments. The local heat transfer coefficients for the paraffin slurry were larger than those for water. Thermally fully developed conditions were observed after the third or fourth row (five or seven times of the chip length) and the paraffin slurry showed effective cooling performance at the high heat flux The paraffin slurry with the mass fraction of 5% showed the most efficient cooling performance when the heat transfer and the pressure drop in the test section are considered simultaneously. The experimental data at the fourth and sixth rows are best agreed with the values predicted by the Malina and Sparrow`s correlation among other correlations, and the empirical correlations for water and 5% paraffin slurry were obtained at the first and sixth rows when the channel Reynolds number is over 3,000.

• Journal of The Korean Astronomical Society
• /
• v.46 no.6
• /
• pp.235-242
• /
• 2013

We compare mass-loss rates of OH/IR stars obtained from radio observations with those derived from the dust radiative transfer models and IR observations. We collect radio observational data of OH maser and CO line emission sources for a sample of 1533 OH/IR stars listed in Suh & Kwon (2011). For 1259 OH maser, 76 CO(J=1-0), and 55 CO(J=2-1) emission sources, we compile data of the expansion velocity and mass-loss rate. We use a dust radiative transfer model for the dust shell to calculate the mass-loss rate as well as the IR color indices. The observed mass-loss rates are in the range predicted by the theoretical dust shell models corresponding to $\dot{M}=10^{-8}M_{\odot}/yr-10^{-4}M_{\odot}/yr$. We find that the dust model using a simple mixture of amorphous silicate and amorphous $Al_2O_3$ (20% by mass) grains can explain the observations fairly well. The results indicate that the dust radiative transfer models for IR observations generally agree with the radio observations. For high mass-loss rate OH/IR stars, the mass-loss rates obtained from radio observations are underestimated compared to the mass-loss rates derived from the dust shell models. This could be because photon momentum transfer to the gas shell is not possible for the physical condition of high mass-loss rates. Alternative explanations could be the effects of different dust-to-gas ratios and/or a superwind.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.33-36
• /
• 2002

This study was performed to investigate vibration generated from machines that were used at factories and construction works. Vibrations were measured at three points in a straight line based on distance from the vibration sources, and analyzed to assess the vibration levels. The average vibration level of factory machines was 65.4 dBV at 2 m, and that of construction machines was 74.0 dBV at 5m. Vibration attenuations was 4.0∼8.2 dBV by double distance. All such data were applied to gain coefficients of attenuation equations for predicting vibration level by distances from the vibration sources. Data recorded on tapes were analyzed to understand the characteristics of frequency because these characteristics are important factors to design a plan for installing the vibration-proof devices. Finally, considering results from these analysis, assessment, and prediction, the methods for reducing vibration generated from machines were discussed.

• Korean Journal of Human Ecology
• /
• v.20 no.6
• /
• pp.1153-1165
• /
• 2011

Decision making for gas boiler consumers depends on the characteristics of products such as the price and quality as well as the brand image. Although a gas boiler is a high involvement product in terms of price, in fact, it is a low involvement product which is greatly affected by installers. This study examined variables which affect the level of satisfaction and repurchase intention by surveying about 1,000 housewives through an on-line questionnaire. The results were as follows: first, gas boiler users' general knowledge of gas boilers showed a correct-answer rate of 54.5%. The average satisfaction score of product quality (mean=5.61 out of 7) was higher than that of the satisfactionscore of the company's service (mean=5.46). Second, the level of repurchase intention was above the mid-point (mean=4.72). Multivariate regression found that product satisfaction, service satisfaction, household size, and information sources explained repurchase intentions for gas boilers to be about 50.7%. Gas boiler marketers should pay attention to the survey result in that the level of repurchase intention depends mainly on both consumer satisfaction and information sources.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.6
• /
• pp.564-573
• /
• 2012

The objective of this study is to determine the effect for the sound quality according to the noise source and to build the sound quality index of the laundry noise. In order to compare laundry noise among the influence of noise sources, we made virtual laundry noises by synthesizing an actual laundry noise and each noise source such as a dropping noise, water noise, motor noise and circulation pump noise. We conducted a listening test by customers using virtual laundry noises. As a result of listening test, we found that the dropping noise has a decisive effect on the sound quality of the laundry noise. We conducted the multi regression analysis of sound quality for the laundry noise using the statistical data processing. It is verified to the reliability of the multi regression index by comparison with listening results and index results of other actual laundry noises. This study is expected to provide a guide line for improvement of the laundry noise.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.297-307
• /
• 2021

In the vibrant environment, documentation and managing systems are maintained autonomously through education foundations, book materials and libraries at the same time as information are not voluntarily accessible in a centralized location. At the moment Libraries are providing online resources and services for education activities. Moreover, libraries are applying outlets of social media such as Facebook as well as Instagrams to preview their services and procedures. Librarians with the assistance of promising tools and technology like analytics software are capable to accumulate more online information, analyse them for incorporating worth to their services. Thus Libraries can employ big data to construct enhanced decisions concerning collection developments, updating public spaces and tracking the purpose of library book materials. Big data is being produced due to library digitations and this has forced restrictions to academicians, researchers and policy creator's efforts in enhancing the quality and effectiveness. Accordingly, helping the library clients with research articles and book materials that are in line with the users interest is a big challenge and dispute based on Taibah university in Saudi Arabia. The issues of this domain brings the numerous sources of data from various institutions and sources into single place in real time which can be time consuming. The most important aim is to reduce the time that lapses among the authentic book reading and searching the specific study material.

• Journal of East Asia Management
• /
• v.5 no.1
• /
• pp.75-90
• /
• 2024

About 100 years after the start of mass production by American car maker Ford in 1913, the automobile industry has come to a major transformation in 100 years. In this transformation period, automakers are facing the biggest challenge of converting power sources, the basis of automobiles, from existing internal combustion engines to electric vehicles. Hybrid vehicles have been released in Japan since the late 1990s, and changes in automobile power sources have occurred early. In order to gain global leadership in hybrid vehicles, Japanese automakers and the Japanese government joined forces to promote the growth of the domestic hybrid vehicle market. The government has implemented a policy to substantially subsidize the high price of hybrid cars compared to internal combustion engine cars by providing purchase subsidies and tax benefits to buyers. Toyota has increased its line-up of hybrid cars around the Prius and has further strengthened communication with customers for the sale of hybrid vehicles. As a result of continuing these efforts for about 20 years, the percentage of Japan's hybrid vehicle market in 2022 reached 51% for passenger cars. Recently, each country has been setting and promoting aggressive goals for electric vehicles that require a wider range of physical and institutional infrastructure than hybrid vehicles. This study aims to assess the growth of electric vehicles by looking at the trend of hybrid vehicles and how they've been distributed in the Japanese market.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.42-50
• /
• 2009

Samples of subway dust were collected by the air filter system of 30 subway stations on Daegu subway line 1 in January 2008. Samples were sieved below 100 ${\mu}m$, and 14 elements were analyzed using ICP after acid extraction. Results obtained from the source assessment of trace elements using enrichment factor showed that Ca, Fe, K, Mg, Mn, Na, V were influenced by natural sources such as weathered rock and resuspended soil, while Cd, Cr, Cu, Ni, Pb and Zn were influenced by anthropogenic sources such as fuel combustion and waste incineration. Concentrations were remarkably higher in components from natural sources than in components from anthropogenic sources. Anthropogenic sources were significantly affected by indoor dusts than outdoor dusts. Results of pollution indices of heavy metals indicated that indoor dusts were more contaminated with heavy metal ions than outdoor dusts. The correlation analysis among trace elements indicated that components were much correlated in the order of natural sources-anthropogenic sources, anthropogenic sources-anthropogenic sources, natural sources-natural sources in both indoor and outdoor dusts. Trace element components of outdoor dusts were largely correlated than those of indoor dusts. In addition, indoor dusts were significantly affected by outdoor dusts rather than depth from the surface or the average daily number of subway passengers.