• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.9
• /
• pp.1081-1090
• /
• 1988

A series of procedures using image processing techniques is presented for extracting layout information fast and automatically from chip images. CIF (caltech intermediate form) is chosen for representing such information. First, line-edges are extracted using a line-edge detector. Then, thinning and noise removal procedures follow. Subsequent procedures are vertex extraction and vertex grouping. Finally, CIF is extracted from the coordinates of the grouped vertices. In this paper, the final process is applied to only metal layer. In experiments, this processing scheme is shown to be very effective in extracting CIF.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.75-83
• /
• 2013

We applied a sensitive method based on on-line solid-phase extraction (SPE) and liquid chromatography/mass spectrometry (LC/MSD) using an electrospray interface for the determination of eleven perfluorinated compounds (PFCs) in water. The on-line connection suppressed the target loss by keeping the cartridge from drying, which resulted in improvement of the recovery and saving of the analytical time. For the on-line solid-phase extraction of 10 mL water samples, recoveries were between $80.4{\pm}5.2%{\sim}109.5{\pm}1.4%$ and limit of quantification (LOQ) were 3.6~15.9 ng/L for the PFCs. The total PFCs concentrations of the tributaries and main stream of Nakdong River water samples were in the range of $8.0{\sim}678.6{\mu}g/L$.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3755-3759
• /
• 2010

A on-line SPE (solid phase extraction)-HPLC preconcentration method was developed for the determination of phenolic compounds at trace levels in environmental water sample. XAD-4 and Dowex 1-X8 were used as sorbent in the on-line SPE-HPLC method for the selective enrichment of nine phenolic compounds, which are included in the priority pollutants list of the US EPA. Also alumina prefiltering considerably reduced the amount of interfering peaks due to humic substances that could accumulated due to the preconcentration step and prevent quantification of polar phenolic compounds in environmental water samples. This method was used to determine the phenolic compounds in tap and river water and superiority to the US EPA 625 method in its enrichment factor, pretreatment time, recoveries, and detection limit. The limits of detection were in the range of $0.3-0.9\;{\mu}g/L$ in tap water sample.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.59-64
• /
• 2002

This paper presents a method for line segment extraction for 3-d building reconstruction. Building roofs are described as a set of planar polygonal patches, each of which is extracted by watershed-based image segmentation, line segment matching and coplanar grouping. Coplanar grouping and polygonal patch formation are performed per region by selecting 3-d line segments that are matched using epipolar geometry and flight information. The algorithm has been applied to high resolution aerial images and the results show accurate 3-d building reconstruction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.5078-5094
• /
• 2019

In recent years, the development of drone technologies has promoted the widespread commercial application of drones. However, the ability of drone to carry explosives and other destructive materials may bring serious threats to public safety. In order to reduce these threats from illegal drones, acoustic feature extraction and classification technologies are introduced for drone sound identification. In this paper, we introduce the acoustic feature vector extraction method of harmonic line association (HLA), and subband power feature extraction based on wavelet packet transform (WPT). We propose a feature vector extraction method based on combined HLA and WPT to extract more sophisticated characteristics of sound. Moreover, to identify drone sounds, support vector machine (SVM) classification with the optimized parameter by genetic algorithm (GA) is employed based on the extracted feature vector. Four drones' sounds and other kinds of sounds existing in outdoor environment are used to evaluate the performance of the proposed method. The experimental results show that with the proposed method, identification probability can achieve up to 100 % in trials, and robustness against noise is also significantly improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4100-4105
• /
• 2013

The Peanut sprouts have been used as food for long time in many Asian countries. Among them, resveratrol have bioactivity effects as antioxidant and anticancer. In this work, resveratrol was extracted from peanut sprouts by dipping(extraction time 3h, $25^{\circ}C$) method. And extraction efficiency and amount was identified using on-line screening HPLC-ABTS. From the experimental results, it is evident that the amount of resveratrol($0.310-0.346{\mu}g/mL$) by 50% aqueous EtOH was higher than any 100% water and EtOH composition. Also, the 100% water extracts sample was low yield 2.040-2.145%. The shown results can be applied as sources for pharmaceuticals and functional material.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.103-110
• /
• 2008

A reliable extraction of welded area is the precedent task before the detection of weld defects in industrial radiography. This paper describes an attempt to detect and extract the welded features of steel tubes from the computed radiography(CR) images. The statistical properties are first analyzed on over 160 sample radiographic images which represent either weld or non-weld area to identify the differences between them. The analysis is then proceeded by pattern classification to determine the clustering parameters. These parameters are the width, the functional match, and continuity. The observed weld image is processed line by line to calculate these parameters for each flexible moving window in line image pixel set. The local statistic line-clustering method is used as the classifier to recognize each window data as weld or non-weld cluster. The sequential procedure is to track the edge lines between two distinct regions by iterative calculation of threshold, and it results in extracting the weld feature. Our methodology is concluded to be effective after experiment with CR weld images.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.250-253
• /
• 2007

The purpose of this research is focussed on the numerical predictions of the heat and smoke propagations for a passenger train fire in an underground subway tunnel for different air supply and extraction flowrates. The analysis is performed for one of the stations on subway line #5 in Seoul under the emergency operation mode for different air supply and extraction flowrates. Five different the air supply and extraction flowrates are considered for the numerical analyses. The numerical results show that the air supply and extraction flowrates affect the smoke control performance significantly by improving the smoke removal performance for the balanced control of air supply and smoke extraction and for the unbalanced control with lager smoke extraction than air supply.

• Resources Recycling
• /
• v.27 no.4
• /
• pp.65-69
• /
• 2018

In solvent extraction, extraction isotherm represents the relation between the equilibrium concentration of metal in the aqueous and organic phase. McCabe-Thiele diagram on which extraction isotherm and operating line are constructed provides valuable information on the mass transfer operation. When the equilibrium constant of a solvent extraction reaction is known, the calculation method to obtain extraction isotherm was introduced. Kresmer equation by which the number of extraction stages can be calculated when the distribution coefficient is constant was introduced.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.297-302
• /
• 2008

In this work, the amounts of Flavone C-glycosides homoorientin, orientin extracted from Black bamboo by various ultrasonic waves frequency (35, 72, 170 KHz, 300 Watt $\pm$1) time (15, 30, 60 min) and temperature ($25^{\circ}C$) were compared using 50% aqueous ethanol solution. And describesanalysis of the antioxidant potential of Black bamboo using an high-performance liquid chromatography (HPLC) on-line $ABTS^+$antioxidant screening method. In conjunction with the analysis of their 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) radical scavenging ability. The optimum operating conditions were experimentally determined to analyze the Flavone C-glycosides homoorientin, orientin in the pretreatment ultrasonic extracts. From the results, the effect on extraction yield of variations in frequency, solvent composition and extraction time was investigated. The highest yield of Black bamboo was obtained by ultrasonic waves with a frequency of 72 KHz and an extraction time of 60 min, The extraction frequency 35 KHz ($25^{\circ}C$), time 30 min was selected as an optimal antioxidant activity condition.