• Korean Journal of Construction Engineering and Management
• /
• v.18 no.1
• /
• pp.37-47
• /
• 2017

The proportion of elderly people over 50 years old in the total population of Korea increased from 29.2% in 2010 to 34.8% in 2015. As a result, the proportion of construction workers over 50 years old compared to the total construction workers increased from 20.1% in 2010 to 27.0% in 2015. In this aging society, the construction industry has faithfully carried out the business objectives and budget execution of measures to prevent disasters against elderly workers, but there was a limit to the fundamental prevention of disasters. Because the countermeasures for the prevention of construction disaster are considered on all ages rather than elderly workers. This study investigates the safety and health status of elderly workers at construction sites and suggests the plans to reduce disaster. In particular, to reduce disasters of rapidly growing elderly workers, the authors reviewed the related literature and safety regulations, statistics on the causes of industrial accidents, statistics on the status of industrial accidents, and applied to 3,549 workers who participated directly in the construction activities. The authors surveyed the actual situation of safety and health, presented the comprehensive disaster reduction measures by analyzing the current status and problems of disaster prevention projects. If the countermeasures proposed in this paper can be reflected in the actual policy, it is expected that the countermeasures will be possible to reduce the disaster of the elderly workers at the construction site, which is gradually increasing.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.25-40
• /
• 2008

The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.569-576
• /
• 2017

The electromagnetic valve of pneumatic doors of EMUs has a high failure rate due to air leakage because it supplies air on and off to operate the doors repeatedly. The electromagnetic valve is a very important safety component for which a very high reliability is required because failure makes it impossible to operate the passenger cars. However, domestic urban railway operators maintain electronic valves of the EMU door under a fixed cycle with a spare period according to the full overhaul cycle of the EMU. An improvement of the current maintenance cycle was suggested based on the reliability function and mission reliability. Using the statistical program MINITAB for the operational data of EMU line 6, we analyzed the characteristics of the fault distribution and derived the shape and scale parameters of the reliability function. If we limit the specific reliability probability to under a certain failure rate and calculate its statistical parameters, we can calculate the allowable inspection period with mission reliability. Through this study, we suggested a maintenance period based on RCM (reliability centered-maintenance) to improve the reliability of electromagnetic valves from 68% to 95%.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.361-370
• /
• 1993

Low power physics tests should be peformed for the domestic pressurized light water reactors (PWRs) after refueling. The tests are peformed to ensure that operating characteristics of the core are consistent with predictions and that the core can be operated as designed. But in some low power physics tests, slow but steady reactivity increasing phenomena were noticed after step reactivity insertion by the control rod movement. These reactivity increasing phenomena are due to the low flux level and the gamma background because an uncompensated ion chamber (UIC) is used as the ex-core neutron detector. The gamma background may affect the results or the lour power physics tests. The aims or this paper are to analyze the grounds of such phenomena, to simulate a reference bank worth measurement test and to present a resolution quantitatively. In this study, the gamma background level was estimated by numerically solving the point kinetics equations accounting the gamma background effect. The reactivity computer check test was simulated to verify the model. Also, an appropriate neutron flux level was determined by simulating the reference bank worth measurement test. The determined neutron flux level is approximately 0.3 of the nuclear heating flux. This level is about 3 times as high as the current test upper limit specified in the test procedure. Then, the findings from this work were successfully applied to Kori unit 4 cycle 7 and Yonggwang unit 1 cycle 7 physics tests.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.513-518
• /
• 2005

Capillary electrophoresis (CE) method was developed to determine (+)-catechin and (-)-epicatechin contents in grape seed ethanol extract. CE separation was achieved using 100 mM phosphate and borate buffer at pH 6.0 as background electrolyte and fused silica capillary with 50 microns x 375 microns O.D. (effective length 20.0cm) maintained at $25^{\circ}C$. The applied voltage was 10kV, and detection was performed by DAD at 210 nm, Two catechins were well separated within 6 min with repeatability of <0.8% RSD for migration time and <2.0% RSD for peak area, and correlation coefficients higher than 0.994 were obtained from 58.0 to 174.0 mg/L with detection limit of 0.035 mg/L. Separated compounds were successfully determined. CE method was easy to handle and showed good reproducibility. CE method was compared with conventional coloring and HPLC methods, and main advantages of CE method were low amount of sample required, simple pre-sample treatment, good recovery rate, and short analysis time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2B
• /
• pp.100-107
• /
• 2007

Recently, a study of BcN(Broadband convergence Network) is progressing continuously, and it is important to improve the quality of the service according to subscribers because a scale of network is about to be larger. It is more important to manage QoS(Quality of Service) of all subscribers in layer 2 than layer 3 network since managing it in layer 3 network cost both additional processes and large hardware. Moreover, QoS based on Best-Effort service has been developed because tots of subscribers should use limited resource in BcN. However, they want to be supplied with different service even though they pay more charge. Therefore, it is essential to assign the different bandwidth to subscribers depending on their level of charge. The method of current Rate Limiter limits the bandwidth of each port that does not offer fair service to subscribers. The Rate Limiter proposed in this paper limits bandwidth according to each subscriber. Therefore, subscribers can get fair service regardless of switch structure. This new Rate Limiter controls the bandwidth of subscribers according to the information of learning subscriber and manages maximum performance of Ethernet switch and QoS.

• The KIPS Transactions:PartD
• /
• v.18D no.3
• /
• pp.179-184
• /
• 2011

Current mobile devices have surpassed its boundaries as a more communication tool to a smart device which provides additional features. These features have supported the smart life of its users, but have reached its limit from low-performance processors and short-battery time. These issues can be resolved b implementing higher performing hardware, but they come with a burden of high cost. This paper introduces a new way of managing computing resources in a mobile device by enhancing the quality of human-computer interaction. The real-speed felt by users are mainly influenced by the time it takes form a user's input to the device to display the completed result on the screen. Since the size of the screen for mobile devices are small, if the processor only fetch data to be used for displaying on screen, the time can be significantly reduced. MVC+Prefetch Controller pattern accomplished this goal by using the minimum amount of data from DB to fetch display and still manages to support high-speed data transfer to achieve seamless display. This idea has been realized by practice using Samsung mobile phone S8500, which demonstrated the superior performance on user's perspective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.28-34
• /
• 2020

A reservoir is defined as an artificial facility that stores and controls water during floods and droughts. Korea has constructed and managed reservoirs all over the country to benefit farming communities. The importance of reservoirs has decreased gradually due to urbanization and the spread of tap water, but the importance of water is increasing because of the recent shortage of water and the resulting rise in the price of water resources. Therefore, this study suggests countermeasures through an analysis of the used threshold for agricultural reservoirs. To this end, the forecast of rainfall up to 2100 was first analyzed using flood estimates and RCP scenarios through rainwater data collection. The increase in the RCP 8.5 scenario, the largest increase in the probability rainfall, was calculated by adding it to the current probability rainfall, and it was predicted that the marginal height of Odong Dam would reach its limit in 2028. Therefore, as a countermeasure against this, the measures to secure effective water storage were suggested through measures, such as lowering the height of Yeosu and installing movable beams. Overall, it is expected that effective management of the reservoirs used for agriculture will be possible in the future.

• 대한공업교육학회지
• /
• v.31 no.2
• /
• pp.111-127
• /
• 2006

The purpose of this study is to analyze current recruiting examination and to categorize and construct test item that assess a variety of Mechanic Metal teachers in technical high school for appointing new Mechanic Metal teacher. The future developmental directions in this study are as follows: First, the examination for appointing secondary school new Mechanic Metal Teacher reflects the curriculum of the teacher education and technical high school, must be nomalize. Second, the rational readjustment of the basic necessary subjects for Machinery Metal recruiting examination is required. Third, the Mechanic Metal recruiting examination must prepare the criteria for the domain ratio of presenting problems and improve with level of presenting the question items which demands a knowledge, application and critical thinking. Fourth, in order to avoid the bias of the some subject tendency with committee making questions of different domain, more participation of a committee making questions is required. Fifth, the practical evaluation must be executed by the effective method to be able to make up for the limit of paper and pencil tests Sixth, as the long-term prospect to secure the professionalism of teacher, the recruiting examination of teachers must be carried out with the Machinery and Metal subject, respectively.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.166-173
• /
• 2020

AtoN Accident causes navigation dangerous to ships and reduces the credibility of aids to navigation. The most light buoys on the sea have the highest accident rate from the influence of sea weather such as wind, current, and waves. However, in Korea, despite the different sea weather conditions in each sea area, in calculating the dynamic stability of the light buoy, there is a problem that only limit value conditions are applied to all sea areas. Thus, the purpose of this study was to analyze the dynamic stability of the LL-26(M) light buoy, the most installed buoy of its kind on the sea and suggest a stable operation plan for the LL-26(M) light buoy. To achieve this, after analyzing the weather for each sea area of the previous study related to the light buoy, the dynamic stability (inclination angle) was estimated by applying to the representative light buoys of each sea area wherein the number of accidents caused by sea weather was high. As a result of this study, the inclination angle of LL-26(M) light buoy for each sea area was different. That is, the inclination angle caused by winds was 10.329°-36.868°, the inclination angle caused by currents was 0.123°-18.834° and the inclination angle caused by waves was 4.777°-20.695°. The results of study can be used as basic data useful for installation standards for each sea area for stable operation of the LL-26(M) light buoy.