• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.169-170
• /
• 2017

In this study, the adequacy evaluation of limestone for exterior use is presented. Major flaws of limestone for exterior use are reviewed. In addition, freezing-thawing test of the limestone specimens were performed. As a result, the limestone specimens was damaged by the freezing and thawing action for 300 cycle.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.163-164
• /
• 2022

Using the limestone powder as material that can substitute the clinker, it seems to get positive effect as filler and enhance workability of cement but the substitution amount and chemical properties of it can affect mechanical properties of cement. Thus, in this study, the effect limestone powder that has other properties on cement is evaluated. As a result, the workability enhancing effect was confirmed but deterioration of compressive strength was also checked. Later, with the view of workability, the experiment that the possibility of strength compensation by decreasing unit water weight of limestone powder cement is planned when the limestone powder is used.

• 한국건설순환자원학회논문집
• /
• 제12권1호
• /
• pp.102-109
• /
• 2024

석회석미분말을 콘크리트용 재료로 활용하기 위하여 치환율을 달리하여 제조한 시멘트 경화체의 역학적 특성 및 내구특성을 평가하였다. 일반적으로 석회석미분말은 시멘트 수화반응에 기여하지 못함으로 이를 사용한 모르타르의 압축강도 시험결과 치환율이 증가할수록 압축강도는 감소하였다. 그러나 석회석미분말을 사용한 모르타르의 염소이온 침투저항성, 탄산화저항성 및 화학저항성 등 내구성능을 평가한 결과 석회석미분말의 작은 입자가 시멘트 경화체 내부의 미세한 공극을 채워주는 마이크로 필러효과로 인하여 치환하지 않은 기준 모르타르에 비하여 우수한 결과를 나타내었다. 따라서 석회석미분말은 콘크리트의 내구성 향상을 위한 효과적인 방법으로 활용될 수 있을 것으로 기대된다. 본 연구에서는 석회석미분말의 치환량을 0 %, 5 %, 10 %, 15 %로 변화시켜 내구성능을 평가하였으나 향후 석회석미분말의 종료와 치환량을 다양한 수준으로 변화시켜 내구성능에 미치는 영향을 보다 자세히 연구할 필요가 있을 것으로 판단된다.

• International Journal of Concrete Structures and Materials
• /
• 제4권2호
• /
• pp.97-104
• /
• 2010

The crushed limestone sand is an abundant material in Tunisia, which induces many environmental problems. Indeed, available stocks of siliceous sand drastically decrease because of its massive use in hydraulic concrete. Some recent research works, carried out in Tunisia, concluded that crushed limestone sand may be used in concrete manufacture instead of siliceous sand traditionally used. In this context, an experimental study was achieved in order to quantify the influence of a partial or total substitution of siliceous sand by crushed limestone sand on hydraulic concrete performances. Preliminary chemical and physical tests on crushed sand indicated that it presented the minimum requirement for its use as aggregate in hydraulic concrete. 79 concretes were then prepared with siliceous sand, crushed limestone sand and a mix of the two sands. Their slump value and compressive strengths were measured on plain concretes. Complementary structural tests on reinforced concrete beam were also performed. The results proved that crushed limestone sand concretes showed workability and mechanical performances closed to those of siliceous sand concretes.

• 자원환경지질
• /
• 제13권1호
• /
• pp.21-27
• /
• 1980

${\delta}^{13}C$ and ${\delta}^{18}O$ values were determined for the Paleozoic limestones (Great Linestone Series) from the Taebaegsan region and the age-unknown limestones (Janggun Formation) from the Janggun mine, Korea. Limestones of the Great Limestone Series exhibit a range of carbon isotopic composition from -4.5 +1.3‰ with a mean ${\delta}^{13}C$ value of -1.1‰, relative to the PDB standard, and of oxygen isotpic composition from +8.8 to +23.3‰ with a mean ${\delta}^{18}O$ value of +16.0‰, relative to the SMOW, falling into the normal marine limestone range according to Keith and Weber (1964), and Degens and Epstein(1964). Carbon isotopic composition of limestones of the Great Limestone Series becomes progressively lighter from Pungchon limestone of middle Cambrian age to mid-Ordovician Maggol limestone, possibly due to change in depositional environment in the Taebaegsan basin. Variation in isotopic composition of limestones from Hwajeol to Dumugal formation offers the possibility or deposition in shallow sea environment, in which fresh waters were added in several stages. Janggun limestone of unknown age may be corelated with the Paleozoic limestones of Great Limestone Series as infered from the istopic composition ranging from -2.8 to + 0.7‰ of ${\delta}^{13}C$ and +13.4 to +22.4‰ of ${\delta}^{18}O$.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.132-137
• /
• 2014

The study was performed with low-grade limestone, which is used to make cement or is disposed of due to its low CaO content. In this study, the optimal condition of limestone with which to manufacture precipitated calcium carbonate (PCC) and limestone in fiber was determined through in-situ reactions. The best firing condition is with slaked lime with rapid cooling after 2 h of firing at $1000^{\circ}C$. In addition, the content of CaO can be increased by sorting the low-grade limestone using a 200 mesh filter, and the optical quality of old newspaper (ONP) was similar when using both low-grade and high-grade limestone. Also, controlling the particle size of PCC is an important factor pertaining to the optical characteristics of paper.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.575-583
• /
• 2014

The flue gas desulfurization (FGD) process is currently the most effective process utilized to remove sulfur dioxide from stack gases of coal-fired plants. However, FGD systems use a lot of limestone as desulfurizing agent. In this study, we use limestone sludge, which is a by-product of the steel industry, to replace the desulfurizing agent of the FGD system. The limestone particle size is found to be unrelated to the desulfurizing rate; the gypsum purity, however, is related. Limestone sludge mixes with limestone slurry delivered at a constant rate in a desulfurizing agent with organic acid are expected to lead to a high desulfurization efficiency and high quality by-product (gypsum).

• 한국환경복원기술학회지
• /
• 제22권1호
• /
• pp.47-59
• /
• 2019

This study was composed of four treatments [no treatment, phosphate + limestone layer treatment, phosphate + sodium bicarbonate + cement layer treatment, and phosphate + sodium bicarbonate + limestone layer treatment] for figuring out vegetation effects on the acid drainage slope. Treated acid neutralizing techniques were effective for neutralizing acidity and vegetative growth in order of [first: phosphate + sodium bicarbonate + limestone layer treatment, second: phosphate + sodium bicarbonate+cement layer treatment, third: phosphate + limestone layer treatment and fourth: no treatment] on the acid drainage slope. We found out that sodium bicarbonate treatment was additory effect on neutralizing acidity and increasing vegetaive growth besides phosphate and neutralizing layer treatments. In neutralizing layer treatments, Limestone layer was more effective for vegetation and acidity compared to cement layer treatment. Cement layer showed negative initial vegetative growth probably due to high soil hardness and toxicity in spite of acid neutralizing effect. Concerning plants growth characteristics, The surface coverage rates of herbaceous plants, namely as Lotus corniculatus var. japonicus and Coreopsis drummondii L were high in the phosphate + sodium bicarbonate + limestone layer treatment while Festuca arundinacea was high in the phosphate + sodium bicarbonate + cement layer treatment. We also figured out that soil acidity affected more on root than top vegetative growth.

• 콘크리트학회논문집
• /
• 제27권1호
• /
• pp.3-9
• /
• 2015

본 연구에서는 소량 혼합재로서 석회석과 고로슬래그를 단독 또는 복합으로 10%까지 혼합하면서 나타나는 보통 포틀랜드 시멘트의 수화특성에 대해 고찰하였다. 응결시간은 석회석과 고로슬래그를 복합하여 10% 혼합한 경우, 석회석의 혼합량이 증가할수록 Alite의 수화반응을 촉진시켜 종결이 빨라졌다. 재령 3일에서 모르타르의 압축강도는 석회석 5%-고로슬래그 5% 혼합이 가장 컸다. 이러한 이유로는 석회석에 의한 Alite의 수화촉진에 의해 생성된 C-S-H 수화물과 Alite의 수화촉진에 의해 부가적으로 생성된 $Ca(OH)_2$가 일부 고로슬래그와 반응하여 추가적으로 C-S-H 수화물을 생성하였기 때문이다. 재령 7, 28일에서는 석회석 3%-고로슬래그 7%의 복합 혼합이 가장 큰 압축강도를 나타냈다. 이 시기에는 고로슬래그의 수화반응이 활발한 시기로 C-S-H 수화물 생성량은 석회석의 혼합량보다 고로슬래그의 혼합량에 의존한다. 그리고 고로슬래그의 수화반응을 활성화하기 위해서는 $Ca(OH)_2$ 생성량이 증가해야 하므로, Alite의 수화를 활성화 시키는 소량의 석회석이 필요하다. 따라서 재령 7일 이후에는 고로슬래그의 혼합량이 많고 석회석의 혼합량이 적은 것이 보통 포틀랜드 시멘트의 강도발현에 효과적이었다.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.440-448
• /
• 2023

시멘트 산업의 원료대체 기술의 하나인 혼합재 활용 기술은 다른 기술에 비해 접근성이 상대적으로 좋아 쉽고 빠르게 실적용이 가능할 것으로 기대된다. 시멘트 혼합재 중 석회석 분말은 핵형성효과, 화학적효과, 충전효과를 통해 시멘트 성능을 향상시킬 수 있다고 보고하고 있어 시멘트 혼합재로써 적합성이 기대되는 재료이다. 한편, 전 세계적으로 양질의 석회석이 고갈되면서 점토질 또는 마그네시아(MgO) 함량이 높은 석회석의 사용이 점차 불가피해지는 상황이다. 따라서 본 연구에서는 국내에서 흔히 사용되는 서로 다른 품질의 석회석을 혼합한 석회석 시멘트의 기초 물성을 측정하여 혼합재로서의 적합성을 평가하고자 하였다. 결과적으로 석회석 혼합재 화학성분과 상관없이 알라이트 반응촉진 효과를 확인할 수 있었다. 하지만 화학성분보다 치환량에 따른 희석효과가 크게 나타났다. 본 연구범위 내에서 석회석의 함량이 15 % 이내의 범위에서 중품위의 석회석도 혼합재로 사용할 수 있을 것으로 판단된다. 추후 시멘트 화학성분에 따른 추가적인 실험을 통하여 석회석 혼합재의 화학성분이 미치는 영향을 평가할 예정이다,