• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.171-182
• /
• 2006

• Journal of the Korean institute of surface engineering
• /
• v.29 no.4
• /
• pp.238-252
• /
• 1996

In order to study the effect of interface oxides on the adhesion strength of the copper/epoxy system, copper foils were immersed in black oxide or brown oxide forming solutions before lamination with epoxy prepregs, and variation of peel strength with the treatment time were investigated. Results showed that peel strength decreased rapidly up to 1 minute of treatment lime and remained constant in the case of the black oxide treated specimens, which was accompanied by the thickening of $Cu_2O$ at the Copper/Epoxy interface during the period. In contrast, peel strength increased rapidly up to 1 minute of treatment time and remained constant in the case of the brown oxide treated specimens, which could be ascribed to the thickening of CuO. Subsequent heat treatments of the Copper/Epoxy laminations at $120^{\circ}C$ in air showed that peel strength remained constant in the case of the black oxide treated specimens but decreased gradually in the case of the brown oxide treated specimens. Following XPS analyses revealed that the latter was possibly caused by the coalescence of CuO at the Copper/Epoxy interface into $Cu_2O$.

• International Journal of Railway
• /
• v.6 no.3
• /
• pp.90-94
• /
• 2013

Cement or lime is generally used to improve the strength of soil. However, bacteria were utilized to produce cementation of loose soils in this study. The microo rganism called Bacillus, and $CaCl_2$ was introduced into loose sand and soft silt and $CaCO_3$ in the voids of soil particles were produced, leading to cementation of soil particles. In this study, loose sand and soft silt typically encountered in Korea were bio-treated with 3 types of bacteria concentration. The cementation (or calcite precipitation) in the soil particles induced by the high concentration bacteria treatment was investigated at 7 days after curing. Based on the results of Scanning Electron Microscope (SEM) tests and EDX analyses, high concentration bacteria treatment for loose sand was observed to produce noticeable amount of $CaCO_3$, implying a significant cementation of soil particles. It was observed that higher calcium carbonate depositions were observed in poorly graded distribution as compared to well graded distribution. In addition, effectiveness of biogrouting has also been found to be feasible by bio-treatment without any cementing agent.

• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1025-1032
• /
• 2020

This work was performed to develop a dip injection wet scrubber (DIWS) system with chlorine dioxide as the oxidant. The exhaust pollutants from a lime kiln of paper-mill were introduced to the system. When NaClO₃ was used to oxidize NO into NO₂, the oxidation was unsatisfactory and the combination of HNO₃ or H₂SO₄ was required for 100% oxidation. ClO₂ is recommended to oxidize NO and SO₂ effectively. With the combination of 1^st stage of DIWS and ClO₂, 57.1% of NOx and 98% of SO₂ were effectively removed. In the case of 2^nd stage of DIWS and ClO₂, 93.5% of NOx and 99% of SO₂ were removed. The ClO₂+DIWS process was superior to the ClO₂+Scrubber process in terms of investment, running cost and NOx removal efficiency.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.440-445
• /
• 1999

In order to investigate the change of physiological active compounds in buckwheat with soil chemical properties and soil conditioners, we cultured buckwheat at an experimental open field station, Chonnam Provincial Agicultual Reserch and Extension Service. Fatty acids, phenolic compounds and tyrosinase inhibitory activity (TIA) from buckwheat grains and plants were analyzed. The contents of fatty acids in buckwheat plants was less than that of buckwheat grain. The fatty acids of buckwheat plants and grains were composed of saturated and unsaturated fatty acids. The contents of unsaturated fatty acids were more than saturated fatty acids. The phenolic compounds in buckwheat were from $682.6mg\;kg^{-1}$ to $1822mg\;kg^{-1}$. The phenolic compounds in buckwheat with addition of applied lime were $1822mg\;kg^{-1}$. It was higher than any other plot. The tyrosinase inhibitory activity (TIA) of sediment c in buckwheat grain with addition of applied lime was 92.8%. It was more than that of sediment a, b or compound A, B, C within the same treatment. But the TIA of compound C in buckwheat with application of borax was 81.0%. It was highest of all sediments and compounds within the same treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.23 no.3
• /
• pp.180-187
• /
• 1990

This experiment was conducted to find a methode reducing peant empty pods when it was cultivated on a newly reclaimed upland soil in Kimjae, Jeonbuk, Korea. Liming materials, slaked lime and dolomite were applied to the soil at two levels : lime requirement amount neutralizing the soil and one of 1.5 times. The results are summarized as the followings. 1. There was a yield increase of 27% from the field applied 1.5 times amount of dolomite Compared to that of slaked lime. The number of empty pods per plant was at the lowest level with the treatment of higher amount of dolomite. 2. At the maturing stage of the plant there was a positive significant correlation observed between the content of MgO and other parameters such as no, of branchs per plant dry weight per plant, no, of pods per plant and 100 seed-weight. But the correlation between MgO content and the no of empty pods was negatively significant at 5% level. 3. The content of CaO and MgO was significantly correlated to hull and pod volumes, pod surface area, hull thickness and hull weight. 4. Correlation coefficients between yield and the contents of Ca and Mg in soil at mauring stage were $0.572^{**}$ and $0.556^{**}$ respectively.

• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.162-167
• /
• 2008

To enhance the control efficacy against cockroaches in dwelling space, repellent ("Push") was set down on one comer and a poison bait including attractant ("Pull") was on the opposite side. And we tested the control efficacy of Push-Pull strategy by behavior-stimuli of cockroaches. In a mini-field test, German cockroach males primarily chose shelters nearest to the attractant-treated surfaces and farthest from the repellent-treated surfaces. The consumption of food or bait was also highest from food nearest to the preferred shelters by push-pull effect. We evaluated the push-pull insecticidal efficacies of five essential oils belong to Citrus plant, namely, grapefruit, lemon, lime, orange, and petitgrain. The combined push-pull treatments appeared to be faster and higher insecticidal effects than single (pull) treatment, and the repellent efficacy of Citrus oils was in the order of grapefruit > lemon > lime > orange > petitgrain. Therefore, we propose the effective control of the german cockroach using Citrus oils as repellents and push-pull method into a limited area.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.66-66
• /
• 2008

Most of the properties of ITO films depend on their substrate nature, deposition techniques and ITO film composition. For the display panel application, it is normally deposited on the glass substrate which has high strain point (>575 degree) and must be deposited at a temperature higher than $250^{\circ}C$ and then annealed at a temperature higher than $300^{\circ}C$ in order to high optical transmittance in the visible region, low reactivity and chemical duration. But the high strain point glass (HSPG) used as FPDs is blocking popularization of large sizes FPDs because it is more expensive than a soda lime glass (SLG). If the SLG could be used as substrate for FPDs, then diffusion of Na ion from the substrate occurs into the ITO films during annealing or heat treatment on manufacturing process and it affects the properties. Therefore proper care should be followed to minimize Na ion diffusion. In this study, we investigate the electrical, optical and structural properties of ITO films deposited on the SLG and the Asahi glass(PD200) substrate by rf magnetron sputtering using a ceramic target ($In_2O_3:SnO_2$, 90:10wt.%). These films were annealed in $N_2$ and air atmosphere at $400^{\circ}C$ for 20min, 1hr, and 2hrs. ITO films deposited on the SLG show a high electrical resistivity and structural defect as compared with those deposited on the PD200 due to the Na ion from the SLG on diffuse to the ITO film by annealing. However these properties can be improved by introducing a barrier layer of $SiO_2$ or $Al_2O_3$ between ITO film and the SLG substrate. The characteristics of films were examined by the 4-point probe, FE-SEM, UV-VIS spectrometer, and X-ray diffraction. SIMS analysis confirmed that barrier layer inhibited Na ion diffusion from the SLG.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.217-221
• /
• 1986

A column test was conducted to find out the effect of application of slaked lime, calcium sulfate, calcium superphosphate, and phosphoric acid on the solubility of lead in soil. The soil was adjusted to 310.8 ppm concentration of Pb and applied with amounts of calcium equivalent to 600, 1000, 2000 ppm as slaked lime; sulfate 144, 288, 432 ppm as calcium sulfate; phosphate 95, 190, 285 ppm as calcium superphosphate and phosphoric acid, respectively. The results obtained are as follows: 1. The increasing application of improvement agents reduced the amounts of water soluble Pb in soil. Phosphoric acid was the most effect among to the treatments. 2. The slaked lime treatment has the highest pH of soil and the lowest at the phosphoric acid one. The soil Eh has a reverse tendency the soil pH. 3. Water soluble Ca, $PO_4$ and $SO_4$ contents increased with increasing application amounts of improvement agents in soil. 4. $1N-NH_4$ OAC soluble Pb content in soil was a decreasing tendency in the order of calcium superphosphate, phosphoric acid, slaked lime, calcium sulfate and control after experiment.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.69-76
• /
• 2024

In an effort to achieve the goal of carbon neutrality, countries around the world are aiming to phase out coal-fired power plants. Due to various reasons, electricity production through coal-fired power generation and sulfur oxide (SOx) emissions are expected to continue in the future. In the South Korea, sodium bicarbonate (NaHCO₃) and lime materials are used to treat SOx, and most of the sodium bicarbonate is imported. Therefore, this research was conducted to replace sodium bicarbonate by improving the physical properties of lime materials using domestic limestone. Limestone was heat-treated through a box-type electric furnace and a vertical electric furnace. Due to the structural characteristics of the vertical electric furnace, a lime material(quicklime) was possible to improve the physical properties like a specific surface area and a pore volume. Then, they were reached to 22.33 m²/g specific area and 0.14 cc/g pore volume.