• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.11-16
• /
• 1999

This study was conducted to compare the dry matter intake, the digestibility, and utilization of nitrogen and energy of Korean native goats, when fed on orchardgrass(OG) mixed with alfalfa(AA) at a different levels. Experimental diets include three treatments : OG 100%, OG 80%+AA 20%, and OG 60%+AA 40%. With increasing levels of AA supplementation, the content of CP was higher for AA supplemented diets than for OG 100% diets, while the content of NDF, ADF, hemicellulose and lignin content were slightly lower for AA supplemented diets than for OG 100% diets. Also, the DM intake and the digestibility of DM, cellular constituents, NDF and ADF were higher for AA supplemented diets than for OG 100% diets, especially those were the highest in OG 60%+AA 40% diets(P<0.05). The apparently digested N, retained N and biological value of AA supplemented diets were increased with increasing levels of AA supplementation, compared with those of OG 100% diets(P<0.05). The utilization of DE and ME were slightly high in OG 60%+AA 40% diets, but there was no significant difference among all diets. According to the results, DM intake, digestibility and nitrogen utilization were improved in goat fed diets with supplementation AA(AA 20%, 40%), compared with those of OG 100% diets. But energy utilization did not show the difference among diets. Hence, It needs to provides to the adequate energy sources to goats.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.238-243
• /
• 2001

Mass reduction and physicochemical properties of the produced compost were investigated during composting domestic food wastes without additive. A small composter used in this study had the height of 15 cm from the center of bottom half circle (diameter 24 cm) up to under the lid, the side length of 50 cm and the horizontal lid angle of $50^{\circ}$ and was operated at the heating unit temperature of $85^{\circ}$. It was mixed by the rotating arm for two minutes in every half hour while supplied with air flow at 3 L/min for 10 minutes in every half hour. This condition was found in a preliminary experiment as optimal for keeping the water content of composting material in the optimal range without adding any bulking materials. The domestic food wastes were added into the composter at the rate of 1 kg/day without additives during composting. The results were as follows; during the composting process, water content maintained in the range of $51.0{\sim}53.5%$. Hemicellulose and lignin contents did not show any tendency, but cellulose content decreased. During the composting process, $NH_3-N$ and $NO_2-N$ were not detected due to nitrification. The contents of inorganic compounds did not increase during the composting process. They were in the range of $1.32{\sim}1.71%\;P_2O_5$, $1.29{\sim}1.48%\;CaO$, $0.41{\sim}0.49%\;MgO$, and $0.38{\sim}0.74%\;K_2O$. For 20 days, weight reduction rate was 67.5% in wet basis, and decomposition rate was 48% in dry basis. Concentration of heavy metals (Cu, Cr, Cd, Pb, Zn, Hg, As) was less than the limiting value of the compost. Maturity of the produced compost was 3 grade through reaching maximum temperature of $46{\sim}48^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.6
• /
• pp.475-489
• /
• 2013

This work was conducted to investigate the effect of the addition of binders, such as rapeseed flour, coffee waste, bark, pine cone and lignin powder, on the fuel characteristics of the pellets fabricated with larch and tulip tree sawdust. Moisture content, bulk density and higher heating value of most pellets fabricated with the binders exceeded the 1st-grade pellet standard designated by Korea Forest Research Institute, but ash content of the pellets fabricated with rapeseed flour or bark of 10 wt% on the dry weight basis of sawdust was satisfied with just the 2nd- or 3rd-grade standard. The durability of tulip tree-pellets was positively influenced by the addition of rapeseed flour, coffee waste or lignin powder and increased with increasing the amount of the binders. For larch-pellets, the increase of binders did not greatly affect the durability, and even the durability reduced with the increase of bark or pine cone. From the microscopic observation, the obvious feature of pellet surfaces was not identified by the type of binder but by the addition amount of the binder. In summary, the addition of binders contributed to the fuel characteristics of wood pellets, and particularly the characteristics of wood pellets fabricated with coffee waste improved greatly. Therefore, if the binders are secured sufficiently with a reasonable cost, it might be possible to commercialize wood/binder pellets, which have better fuel characteristics than conventional wood pellets.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.292-296
• /
• 2011

Liberation of fermentable sugars from lignocellulosic biomass is one of the key challenges in production of cellulosic ethanol. Aqueous ammonia cleaves ether and ester bonds in lignin carbohydrate complexes. It is an effective swelling reagent for lignocellulosic biomass. The aqueous ammonia pretreatment selectively reduces the lignin content of biomass. However, at high temperatures, this process solubilizes more than 50% of the hemicellulose in the biomass. Here we conducted a SAA(Soaking in Aqueous Ammonia) process by moderate reaction temperatures at atmospheric pressure using various lignocellulosicbiomass. The optimum condition of this process was 15 wt% of aqueous ammonia at 50 of reaction time during 72 hr. The delignification was up to 60% basis on initial biomass and the enzymatic digestibility was 60-90% for agricultural biomass, respectively.

• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.311-318
• /
• 1994

We examined spatial and temporal patterns of root decomposition for three and half years, from October 1986 to April 1990, in semi-arid Chihuahuan Desert. Decomposition of roots occurred in a two-phased pattern: an early period of rapid mass loss followed by a period of slower loss. The rate of root decomposition had a high negative correlation with the initial lignin concentration in roots (r=-0.84, p<0.05). Annual mass loss rate of Baileya multiradiata, a herbaceous annual, was the highest with the value of 0.60, while that of Panicum obtusum. a perennial grass which was restricted to playa, was the lowest with 0.13. The mass loss rate of roots in the playa was the lowest among the vegetation zones along the transect. After 42 months elapsed, fluffgrass roots in playa lost 40% of the initial mass, while in other sites it lost on average 55% of the initial mass. In all roots except for desert marigold, there was an initial release of nitrogen early in decomposition followed by net nitrogen immobilization. Nitrogen concentration of the desert marigold roots showed linear increase from the beginning. Lignin concentration of perennial grass roots were higher than those of herbaceous annual and woody perennial root.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.103-107
• /
• 1989

To determine optimal sowing time of forage rape in southern areas of Korea, forage rape cv. Velox, the highest yielding variety among seventeen introduced varieties of forage rape, was grown under five different sowing times. The results obtained are summarized as follows: 1. Yield components such as plant length, number of branches and number of leaves etc. were highest at the sowing time of Sep. 14 and Sep. 24. 2. Plants sown at Sep. 14 and Sep. 24 also showed highest'fresh and dry matter yield. 3. As plants were grown under later sowing time, they showed higher values in content of crude protein and lower values in contents of crude fiber such as NDF, ADF, cellulose and lignin. 4. There was no relationship between variation of IVDMD and sowing time. Plants sown at Sep. 14 and Sep. 24 showed highest digestible dry matter yields.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.18 no.4
• /
• pp.345-350
• /
• 1998

In order to evaluate the feed value of rice straw as influenced by ripening stage, and to determine the effects of chemical treatments and ensiling on its feeding value, in situ studies using a rumen fistulated Korean cow nylon bag technique, and digestion trials with sheep were conducted. Experiments were conducted at the Experimental Farms, Woosuk University, Wanju in 1998. The results obtained are summarized as follows; 1. The contents of crude protein and crude fat were decreased(P<0.05), while those of crude fiber and crude ash were increased as the ripening of rice straw progressed. The content of NDF was not affected by the ripening stage. After the yellow stage hemicellulose was remarkably decreased while cellulose and lignin were increased. 2. Degradation of rice straw NDF in the rumen was most rapid when at the heading stage, but degradation of straws after the milky stage were similar each other. Degradation of rice straw ADF, on the other hand, did not show any difference with advancing ripening stage. In Conclusion, the change of chemical composition and degradation rate of rice straw in the rumen under the different ripening stage, it can be concluded that the lignification of rice straw was accelerated after the heading stage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.75-81
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on BCTMP fibers and handsheets properties. DES was prepared using lactic acid and betaine (LB), and the molar ratio of these two components mixtures was controlled to 2:1 (LB 2:1) and 5:1 (LB 5:1). As results, 2% of BCTMP pulp (o.d. weight) was extracted when it was treated by LB 5:1 at $50^{\circ}C$ for 12 hours, stirring constantly at 120 rpm. In contrast, lignin was not extracted when BCTMP was mildly treated by the LB DES mixed with 50% of distilled water at the reacting condition of temperature $60^{\circ}C$ for 2 hours using water bath. These results indicate that conditioned water content and adequate reaction time are needed to achieve effective extraction of lignin. It was also found that stiffening of cellulose fiber due to the mild treatment of LB DES to BCTMP fiber leads to the increase of paper bulk without the loss of strength.

• Journal of Applied Biological Chemistry
• /
• v.51 no.1
• /
• pp.28-35
• /
• 2008

The physico-chemical properties of kapok fibers were altered via the combination processes of chlorite-periodate oxidation, in order to assess their efficacy as a heavy metal adsorbent. The chemically-oxidized kapok fibers were found to harbor a certain amount of polysaccharides, together with lowered lignin content. This alteration in lignin characteristics was clearly confirmed via FTIR and NBO yield. Moreover, chemically oxidized kapok fibers retained their hollow tube shape, although some changes were noted. The chemically oxidized kapok fibers evidenced elevated ability to adsorb heavy metal ions with the best fit for the Langmuir adsorption isotherm model. Three cycles of adsorption-desorption were conducted with in-between regeneration steps. Our experimental results indicated that chemically oxidized kapok fibers possessed excellent adsorption characteristics, and the modified kapok fibers could be completely regenerated with almost equimolar diluted sodium hydroxide. Pb, Cu, Cd and Zn ions evidenced adsorption rates of 93.55%, 91.83%, 89.75%, and 92.85% on the chemically oxidized kapok fibers. The regeneration efficiency showed 73.58% of Pb, 71.55% of Cu, 66.87% of Cd, and 75.00% of Zn for 3rd cycle with 0.0125N NaOH.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.67-74
• /
• 2010

This study was carried out to investigate the pulping and papermaking characteristics of lotus (Nelumbo nucifera G.) leafstalk for the development of high performance paper. Anatomical and chemical properties of the lotus leafstalk were analyzed. The pulping and papermaking properties of the lotus leafstalk by conventional alkali and sulfomethylated pulping processes were also evaluated. The length and width of fibers were 0.06-3.32 mm (av. 1.23 mm) and 3.47-25.6 ${\mu}m$ (av. 20.7 ${\mu}m$), respectively. The length and width of vessel elements were 0.07-0.78 mm (av. 0.20 mm) and 14.1-330.0 ${\mu}m$ (av. 54.13 ${\mu}m$), respectively. The fiber length/fiber width ratio was 60.20. The extractives (cold water, hot water, 1% NaOH and ethanol-benzene) and lignin content of lotus leafstalk were higher than those of plant bast fiber. The contents of holocellulose, lignin, and ash were 73.8%, 24.3%, and 4.3%, respectively. The pulp yields based on pulping methods were sulfomethylated pulping av. 52%, and alkaline pulping av. 42%. The conventional alkaline pulping shows better pulp and sheet properties than the sulfomethylated pulping which was modified pulping processes. But the sulfomethylated pulping shows higher brightness than alkali pulping. In the consequence of FE-SEM observation, lotus leafstalk pulp consists of various kinds of thin walled fibers which have large amount of small pits.