• Steel and Composite Structures
• /
• 제7권2호
• /
• pp.105-118
• /
• 2007

On September $11^{th}$ 2001, the twin towers of the World Trade Center in New York City were struck by two hijacked airplanes. Despite severe local damage induced by the impact, the towers were able to sustain 102 and 56 minutes of the subsequent multi-storey fires before collapsing. The purpose of this study is to contribute to the understanding of the in-fire performance of composite trusses by examining the behaviour of the longer-span type used in the towers. It makes no attempt to be a forensic study of the actual events. Using the finite element package Vulcan, the structural mechanics of typical long-span composite floor trusses are explained, under a variety of scenarios, as the fire temperatures rise. Different boundary conditions, degrees of protection and loading are all covered, the results being presented mainly in the form of graphs of deflection and internal force of members against time.

• Earthquakes and Structures
• /
• 제24권4호
• /
• pp.247-258
• /
• 2023

Multiple pounding tuned rolling mass damper (MPTRMD) distributed in the cavity of voided slabs is proposed to passively control multi-story frame structures, which disperses the mass of the oscillator to multiple dampers so that the control device can be miniaturized without affecting the vibration control performance. The mechanism and the differential motion equations of the MPTRMD-controlled multi-degree-of-freedom system are derived based on the Lagrange principle. Afterward, this advanced RMD is applied to a simplified 20-floor steel frame to evaluate the seismic control performance in the numerical analysis. A four-storey frame structure equipped with MPTRMD is then taken for a shaking table test to verify its effectiveness of control performance. The pounding mechanism has been detailed studied numerically and experimentally as well. The numerical and experimental results show that the proposed damper is practically promising not only for its prominent control performance but also for its lightweight and space-saving. Additionally, the pounding mechanism influenced by the variable impact parameters exhibits a balance between the two effects of motional limitations and energy dissipation.

• 한국소음진동공학회논문집
• /
• 제22권2호
• /
• pp.115-122
• /
• 2012

Sound packages and damping materials have been widely applied on the floor to decrease the interior noise of a vehicle. Based on the previous researches on the low-noise vehicles, weight optimization through minimization of damping material usage is required while decreasing mid and high frequency range noise by application of sound packages. This paper describes the analysis process of robust design of vehicle body structure before applying damping materials and focuses on the analysis and test process of the location optimization at the stage of damping material application. A vibration experiment for the analysis of floor panel velocity with respect to the excitation of suspension attachment parts at the underfloor of a vehicle is performed. And through the improvement correlation between FEA and TEST, a design guide to optimize damping materials application in the early design stage is proposed. A research on vibration damping steel sheets and liquid acoustic spray on deadener(LASD) is performed to minimize manufacturing time and to minimize the space for pre-existing asphalt damping materials. As results of this study, panel stiffness is achieved through curved surface panel and bead optimization. And test baseline of optimum design is suggested through damping material optimization. And finally, through re-establishing the analysis process for vibration reduction of vehicle floors and lightweight design of damping materials, it is possible to design damping materials efficiently in the preceding stage of design.

• KIEAE Journal
• /
• 제14권6호
• /
• pp.59-64
• /
• 2014

The purpose of this study was suggested to establish of student housing by using shipping container. The research method are a study of shipping container and characteristics of student housing by using shipping container, compared typically student housing with student housing by using shipping container. Also there are planning though a case study of various planes and survey based on the student housing city in Amsterdam, Netherland, is called Keetwonen. It is a planning for housing unit to actual build at the part of land to devise master plan The 40FT(High Cube) Shipping Container housing unit are double occupancy room with toilet and balcony. The common areas are the kitchen, laundry facilities, conference room and lounge are available on the first floor with a lightweight steel frame construction method applied for obtain substantive utilization of the space. Considering into the type and scale of site shall be planning in the form of side corridor and central corridor, which is preferable to separate the interior space into two areas by a central corridor to secure personal privacy. Also, planning such as a separate exterior panel, color and landscape design to improve the external image of the container and block the solar radiation heat influx with a pitched roof. Allow 24 college students shall live at the site of Seongnae-dong, Gangdong-gu in Seoul, Korea (site area $330.9m^2$), including common facilities and a lounge with a building that has three stories above ground were established to build plans to target the actual land.