• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.179-188
• /
• 2020

Weeding refers to the process of removing weeds around crop trees, which cause competition in nutrients, moisture, and light, and has a great effect on the early growth and survival of crop trees for establishing forest resources. This study was conducted to find out the timing and method of weeding that is the most suitable for the major afforestation species in national forests. We investigated (1) weeding time and frequency for each afforestation species and (2) the height of crop trees and the length of weeds. Up to 99% weeding operation was carried out until 5 years following afforestation. Pinus densiflora, Larix kaempferi, Chamaecyparis obtusa, Prunus sargentii, and Betula platyphylla plantations accounted for more than 70% of the total weeding sites. Once-a-year weeding process was conducted from late June to late July (67%), and twice-a-year weeding process was the highest in June-August by 31%. Most species were shorter than the weeds until the first and second year of planting, but the height of the crop trees was higher than that of the weeds by 48% in average from the third year. Therefore, from the third year of afforestation, except for some species, it is possible to reduce the cost of weeding operations while reducing nutrient competition by the weeds through the removal of weed sprouts, mainly woody weeds, rather than clear cutting. This study contributes to efficiently develop forest resource establishment while reducing operational costs through a detailed weeding schedule and species-specific method.

• Journal of Bio-Environment Control
• /
• v.8 no.3
• /
• pp.192-201
• /
• 1999

This study was aimed to introduce the measurement of $CO_2$ concentration and leaf area index in the phytotron for predicting the effect of CO.E, light and leaf area index on the instantaneous photosynthetic rate of sweet pepper with the existing ASKAM model. Measurements were made in 2 semi-closed phytotron compartments in which three different $CO_2$ concentrations were applied at random. Plants were grown on containers with circulating nutrient solution at 21$^{\circ}C$ and 80-95% relative humidity. The model estimates crop net $CO_2$ uptake for short time intervals during the day based on short-term data of daily radiation, temperature and $CO_2$ concentration. During the photosynthesis measurements, $CO_2$ concentrations in both compartments and in the basement were measured every minute. This was also done for the flow of pure $CO_2$ into the compartment, global radiation, photosynthetic active radiation inside the compartment, temperature and relative humidity. Crop growth models summarize our knowledge on crop behavior and have as such a wide range of applications in analysis, crop management and thus as a farm management tool.

• The Korean Journal of Community Living Science
• /
• v.18 no.1
• /
• pp.55-62
• /
• 2007

The purpose of this study was to determine the usefulness of Shiitake mushroom, which was rich in vitamin $D_2$ through UV irradiation. For the practical use, we prepared the cold buckwheat noodles using UV irradiated Shiitake mushroom powder and seaweed derived calcium. The time required to acquire $2.5 J/cm^2$ of UV was 30-45 minutes, when the mushrooms were disposed 18 cm below within 1 cm from the UV light. Among the texture profiles detected by texture analyzer, adhesiveness and chewiness were significantly influenced by addition of mushroom powder and/or calcium. Adhesiveness appeared in only 3% mushroom powder noodle, and chewiness was significantly decreased by both of mushroom powder and seaweed calcium. Shiitake powder lowered lightness(L) and yellowness(b), but these deminishing effect on L and B value were compensated with addition of seaweed clacium. With cooking, the value of L was increased and redness(a) and yellowness(b) were decreased in comparison with raw noodle. According to sensory evaluation, addition of Shiitake and calcium increased the preference scores of color and overall acceptance of cold buckwheat noodles, but flavor, taste and texture were not influenced by those ingredients. We concluded that addition of 5% Shiitake and/or calcium to cold buckwheat noodles might give advantages for born health without bad effects on characteristics of those noodles.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.62-67
• /
• 2011

This study has been investigated for characteristic of removal on the effect of changes in soil moisture, microwave power, and temperature through the decomposition of oil-contaminated soil under high temperature conditions with high temperature heating elements and microwave. A lubricating oil having long carbocyclic(C18-C50) commonly known as a non-resolvable material was treated and the efficient for removal of TPH(Total Petroleum Hydrocarbon) obtained 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was found to be removed to 1788 mg/kg for 40 minutes. In case of contaminated soil by light oil and gasoline, the amount of removal was achieved with 567 mg/kg at 6 kW, 500 for 20 minutes that corresponds to reach 98.4% of treatment efficient. In addition, non-resolvable materials contaminated by oil reached TPH concentration on 2,000 mg/kg of worrisome level of soil contamination in the 3-zone at 6kW, $700^{\circ}C$, and 30 minutes, and processing cost at this time was about 8,173 won per ton.

• Archives of design research
• /
• no.18
• /
• pp.25-34
• /
• 1996

Industrial design development methods and processes have changed in accordance with Industrial Information Age. These days, problems are created by existing methods and evaluation of design value , all problems concerned with time and finances sitaution have been made a subject of discussion. Development of design processes have been changed by the development of problem recognition and solving tools, and dpsign tpchnulugy havp hppn replaced by computer technology,Thus. software design processes linking thoughtware to hardware are used in the solution of design problems with many parts. In this study, 3D Modeling samples are presented, 3D Modeling can realise ' Ideas' to '3Dimentional Virtual Ohjects'. These effect and value are anle to decisively influence the process of design problem conference-ebealuation-solution.Proxesses of actual modeling and rendering are made as follows. By compusition of simple 20 drawings and shaping them into 30 objects, 30 solid models can be made. To prssent effectivley, we can make a sample model by varying camera views,light sourses,materials and colours etc. This sample is evaluated by various cumposition, methods and PERT(Program Evaluation and Review Technique). This cuncrete sample (tentative plan)is changed within the CAD SYSTEM by design evaluation, and then converted to flowchart of mass productive conception through refined data. So, that tentative plan can be conformed to design desire actuillly, to the utmost degree. Finally, this design process can be proposed as il new method in cuntrast with current methods. The aim of this study is to suggest effective evaluation methods of design outcome among many evaluating elements.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.8
• /
• pp.851-860
• /
• 2015

Transport Social Overhead Capital refers to public utilities necessary for a nation's basic economic activities, and is divided into roads, railway, subway, ports and so on. It is important to be able to provide these SOC in the right place at the right time to enhance productivity and competitiveness of a nation. In this study, correlation and factor analysis on countries' socioeconomic and transport indicators were performed in order to understand the need for expansion of SOCs including railway, and to identify the impact they have on national competitiveness(productivity). As a result, GDP showed high correlativity(0.59~0.99) with factors such as population, land area, extension of available railroad, and road extension. Specifically, through the analysis of Russia's urban transport system and comparison between socioeconomic indices and SOCs of OECD countries, it was examined that how increasing transport infrastructure investments could enhance national competitiveness. In conclusion, opening new Light Rail greatly affects the growth of GDP followed by the increasing extension of available railroad. Furthermore, if available railroad extension is increased by 10 % from 2014, assuming high speed tram is opened, GDP will likely increase by 21.6%.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.12
• /
• pp.1147-1153
• /
• 2010

To evaluate the solar photocatalytic degradation efficiency of chloroform in a real solar-light driven compound parabolic concentrators (CPCs) system, $TiO_2$ was irradiated with a metalhalide lamp (1000 W), which has a similar wavelength to sunlight. The results were applied to a pilot scale reactor system by converting the data to a standardized illumination time. In addition, the effects of initial pH and the $TiO_2$ dose on the photocatalytic degradation of chloroform were investigated. The results were compared with the specific surface area (S.S.A) and particle size of $TiO_2$, which changed according to the pH, to determine the relationship between the S.S.A, particle size and the photocatalytic degradation of chloroform. The experiment was carried out at pH 4~7 using 0.1, 0.2, 0.4 g/L of $TiO_2$. The particle size and specific surface area of $TiO_2$ were measured. There was no significant difference between the variables. However, pH affects the particle size distribution and specific surface area of $TiO_2$. Inaddition, the activation of a photocatalyst did not show a linear relationship with the specific surface area of $TiO_2$ in the photocatalytic degradation of chloroform.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.949-956
• /
• 2016

There are a number of effects by solar radiation in many aerospace industrial fields, such as degradation of mechanical properties, sealing effect of sealants or decolorization. Because it takes long time to investigate these effects by using the light of natural state, new methods are developed for accelerating this phenomenon. In this paper, we developed an apparatus to simulate accelerated solar radiation phenomenon selecting irradiation intensity $1,120W/m^2$ as the designed environment. Epoxy polymer as the composite material was chosen and processed by ASTM-D638, a reference for tensile test of polymer and plastic. Total color shift was selected as the test category to evaluate acceleration of the test. We obtained acceleration factors and numerical model from test data and concluded it can shorten test periods by accelerated irradiation intensity of $1,120W/m^2$.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.511-518
• /
• 1998

In order to develop the aerosol bolus technique which is thought to be a potential tool for probing geometries or abnormalities of small airways, an experimental system of measuring fast time variations of particle concentration in the inhaled and exhaled breathing air was developed. The system generates monodisperse sebacic acrid particles of 1 micron size and 1.2 of geometric standard deviation in high concentration of $10^8$ particles/cc, delivers a short pulse of particles at the controlled instant during inhalation using a solenoid valve, and measures the fast change of particle concentration in using the laser light scattering. Successful operation of the generator and the measuring system was confirmed by smooth concentration profiles in inhalation. It was also confirmed that maintaining a constant breathing rate is essential to stable outputs and any disturbance in flow rate near the mode (maximum concentration) induces a large number of spurious peaks in the exhalation. Experimental data without strict control of breathing flow rate showed a substantial amount of scatter. The measured results showed an improvement in scatter over the existing results. When compared with theoretical predictions from 1-D convective diffusion equation and other experiments, general characteristics of dispersion for several penetration depths showed a good agreement, but there exists some difference in absolute values, which is attributed to the difference in body conditions. Improvements are needed in the theory, especially in relation to correcting for the effect of breathing flow rate.