• 제목/요약/키워드: light transmission ratio

검색결과 104건 처리시간 0.028초

차광재 종류가 묘삼의 광합성, 형태 및 생육에 미치는 영향 (Photosynthetic, Morphological and Growing Characteristics by Shading Materials in Panax ginseng C. A. Meyer)

  • 조진웅;박홍우;김민정;김현호;최재을
    • 한국작물학회지
    • /
    • 제53권3호
    • /
    • pp.256-260
    • /
    • 2008
  • 본 연구는 이식 재배를 위한 건전 우량 인삼묘 생산을 위하여 해가림 내의 광량이 1년생 인삼의 광합성 및 형태적 특성에 대하여 조사하였다. 투과율에 따른 인삼의 엽록소 함량 및 광합성은 광 투과율이 높을수록 감소하는 경향을 보였으며, 광 투과율이 높은 조건은 잎이 생리적 장해를 받아 황변하는 모습을 보이고 있고, 줄기는 하피가 형성되었으며, 줄기의 유관속내 사부의 발달이 현저하게 위축되었다. 또한 뿌리는 광량이 높을수록 표피가 파괴되는 모습을 보였으며 형성층의 발달이 적었다. 뿌리 수량 역시 광 투과율이 높을수록 감소되었다.

비직교 다중변조 방식을 이용한 고속 가시광통신 시스템에 대한 연구 (A Study on High Speed Visible Light Communication System Using Non-orthogonal Multiple Modulation Scheme)

  • 한두희;이규진
    • 융합정보논문지
    • /
    • 제10권2호
    • /
    • pp.32-38
    • /
    • 2020
  • 본 논문에서는 가시광 통신시스템에서 고속 전송을 위한 변조 기법에 대해서 분석하고, 최적의 비직교 다중 전송을 위한 Dimming level 및 송신 전력 비율에 대해서 연구하였다. 기존의 가시광 통신은 전송 속도를 높이기 위한 멀티전송이 어렵다는 단점이 있다. 송신단에서 고속 전송을 위해서는 반드시 다중 전송기법이 필요한데, 일반적인 가시광 통신은 다중 전송에 한계가 있기 때문에 고속 전송을 위한 다양한 연구가 진행되고 있다. 최근에는 이미지 센서인 Optical Camera Communication(OCC)을 가시광 통신에 적용한 VLC-OCC가 연구되어 기존 가시광 통신이 가지는 다중 전송의 한계를 극복하였다. 그러나 VLC-OCC 방식은 외부 조도의 영향을 더 많이 받고, 수신단에서 검출이 어렵다는 단점이 있다. 또한, 다중 전송을 위한 LED 매트릭스의 위치 인식과 딥러닝을 위한 데이터 셋 신호처리를 위한 Processing-time이 필요하기 때문에 시스템의 복잡도가 증가하게 된다. 이러한 문제를 해결하기 위해 본 논문에서는 비직교 다중 전송 방식을 적용한 고속 가시광 통신을 위한 다중 변조 방식과 그에 따른 향후 연구 방향을 제안하였다.

Dimming Control of LED Light Using Pulse Frequency Modulation in Visible Light Communication

  • Lee, Seong-Ho
    • Journal of information and communication convergence engineering
    • /
    • 제19권4호
    • /
    • pp.269-275
    • /
    • 2021
  • Light-emitting diodes (LEDs) are modulated using a square wave pulse sequence for flicker prevention and dimming control in visible light communication (VLC). In a VLC transmitter, the high and low bits of the non-return-to-zero (NRZ) data are converted to two square waves of different frequencies, which continue for a finite time defined by the fill ratio in an NRZ bit time. As the average optical power was kept constant and independent of data transmission, the LED was flicker-free. Dimming control is carried out by changing the fill ratio of the square wave in the NRZ bit time. In the experiments, the illumination of the LED light was controlled in the range of approximately 19.2% to 96.2% of the continuous square wave modulated LED light. In the VLC receiver, a high-pass filter combined with a latch circuit was used to recover the transmitted signal while preventing noise interference from adjacent lighting lamps.

분극성입자 현탁액을 이용한 투과도 가변필름의 투과도 및 응답특성 (Transmittance and Responce Properties of the Light Transmission Controllable Films Prepared with Dipole Particles Suspension)

  • 이영우;김응수;유병석;이정훈
    • 한국세라믹학회지
    • /
    • 제32권1호
    • /
    • pp.131-139
    • /
    • 1995
  • In order to improve transmittance and response properties, various compositions of light controllable films were prepared by phase separation method. The optical and response properties were measured with the variation of PMMA/suspension ratio and block copolymer/light polarizing particles. According to the increase of the PMMA/suspension ratio, the separated droplets of suspension were interconnected in the film. Decay time was 2.6 sec when PMMA/suspension ratio was 0.5 : 1 and ΔT(difference of the transmittance at OFF/ON states) was reduced with increasing of the ratio of PMMA/suspension. On block copolymer/light polarizing particles ratio variation, the highest transmittance of the film was 67.4% when its ratio was 0.6 : 1 and decay time was varied from 2.15 to 46.6 sec as block copolymer content increased 0.2 : 1 to 1 : 1.

  • PDF

1.25 Gb/s Broadcast Signal Transmission in WDM-PON Based on Mutually Injected Fabry-Perot Laser Diodes

  • Yoo, Sang-Hwa;Mun, Sil-Gu;Kim, Joon-Young;Lee, Chang-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제16권2호
    • /
    • pp.101-106
    • /
    • 2012
  • We demonstrate a cost effective broadcast signal transmission at 1.25-Gb/s with 100 GHz channel spacing based on a broadband light source (BLS) for a wavelength division multiplexing-passive optical network (WDM-PON). The BLS is implemented by using mutually injected Fabry-Perot laser diodes (MI F-P LDs). The error-free transmission without a forward error correction (FEC) is achieved by its low relative intensity noise (RIN). The number of usable modes is determined by RIN and/or extinction ratio (ER) in the spectrum sliced light output.

투광율과 토양수분함량이 묘삼(苗蔘) 생육에 미치는 영향 (Effect of Light Transmission Ratio and Soil Moisture Content on Growth Characteristics of Seedling in Panax ginseng C. A. Meyer)

  • 이성우;김충국;현동윤;연병열;이광원;차선우
    • 한국약용작물학회지
    • /
    • 제16권4호
    • /
    • pp.207-210
    • /
    • 2008
  • 비닐하우스 내에서 일평균 투광율을 21.2%, 24.8%, 30.3%와 같이 3수준으로, 토양수분을 11.0%, 12.5%, 15.3%, 18.9%와 같이 4수준으로 조절하여 묘삼의 생육 및 수량을 조사한 결과는 다음과 같다. 엽록소 함량은 투광율이 낮은 조건에서 토양수분함량의 감소에 따라 완만히 감소되었으나 투광량이 높은 조건에서 토양수분함량이 낮아지면 엽록소 함량은 현저히 감소되었다.고온장해율은 투광율이 낮은 조건에서 토양수분함량이 11.0%처럼 매우 낮을 때에만 현저히 증가되었지만 투광량이 높은 조건에서는 토양수분함량의 감소에 따라 고온장해율은 급격히 증가되었다. 3.3$m^2$(칸)당 생근중, 주당 생근중 및 사용가능묘삼수는 투광율이 증가되고 토양수분함량이 감소될수록 뚜렷이 감소되었는데, 토양수분함량이 적절한 조건(18.9%)에서는 투광율이 증가되어도 묘삼수량의 감소는 적었으나 토양수분함량이 부족한 조건에서는 투광율이 증가될수록 묘삼수량은 현저히 감소되었다. 적변율은 투광율이 높고 토양수분함량이 많을 때 현저히 증가되었는데, 투광율이 높은 조건에서 토양수분함량이 감소되면 적변율도 차차 감소되었으며, 투광율이 낮은 조건에서 적변율은 토양수분함량에 따라 큰 변화를 보이지 않았다.

2.5 Gb/s transmission of a spectrum-sliced incoherent hight source with 0.92 nm bandwidth over 80 km of dispersion-shifted fiber

  • Shin, Sang-Yung;Han, Jung-Hee;Lee, Jae-Seung
    • Journal of the Optical Society of Korea
    • /
    • 제2권1호
    • /
    • pp.22-25
    • /
    • 1998
  • We present a spectrum broadening technique to improve the signal-to-noise ratio of spectrum sliced incoherent light sources using the fiber four-wave mixing effect which occurs in a nonlinear loop mirror located at the receiver. The initial transmission channel bandwidth of 0.92 nm was increased to 1.62 nm in the nonlinear loop mirror at the optical receiver, which enhances the signal-to-noise ratio to a desired value. Using this technique, we have demonstrated the transmission of a 2.5 Gb/s NRZ signal with the 0.92 nm bandwidth through a 80 km dispersion-shifted fiber. The measured transmission penalty was less than 0.2 dB at $1{\imes}10^{-10}$ BER.

생육 초기에 투광량 증가가 인삼생육 및 지상부 병 발생에 미치는 영향 (Effects of Enhanced Light Transmission Rate During the Early Growth Stage on Plant Growth, Photosynthetic Ability and Disease Incidence of Above Ground in Panax ginseng)

  • 모황성;장인배;유진;박홍우;박기춘
    • 한국약용작물학회지
    • /
    • 제23권4호
    • /
    • pp.284-291
    • /
    • 2015
  • This study was performed to investigate the effects of enhanced light transmission on plant growth, photosynthetic ability, and disease tolerance to leaf blight, anthracnose in ginseng (Panax ginseng C. A. Meyer, Araliacease family) during the early growth stage (April to June). The photosynthetic ratio, stomatal conductance, and stem diameter of plants grown under a shade net with 15% light transmission rate showed an increasing trend compared to the control plants (5% light transmission rate) although the growth of the aerial parts were not influenced significantly. Plant height, stem length, and leaf length of treated plants were not significantly different from those of the control plants. Root parameters, such as root length, diameter, and weight of treated plants increased significantly compared to the control. Yield performance ($187.4kg{\cdot}10a^{-1}$) of treated plants was 55.5% higher than that of the control ($150.4kg{\cdot}10a^{-1}$). Additionally, disease severity scores of treated plants were lower than those of the control plants, revealing higher survival rates. To retain high yield potential and enhance the level of disease tolerance in ginseng, we suggest the increase of light transmission rate during the early growth stage.

Analysis of Polarization Properties of Optical Isolator for Fiber Laser

  • Kim, Tae-Gon;Cheon, Min-Woo;Park, Yong-Pil;Cho, Kyung-Jae;Kang, Sung-Hak
    • Transactions on Electrical and Electronic Materials
    • /
    • 제12권6호
    • /
    • pp.241-244
    • /
    • 2011
  • An isolator transmits light in the forward direction and blocks light from passing in the reverse direction. It is regarded an essential optical component in medical, industrial, and research lasers for blocking reflection beams that cause optical damage and noise. It is also used as a communicative light intensifier to expand the lifespan of devices and enhance transmission quality. This study analyzed the characteristics of the core components in the construction of a polarization-independent isolator, namely, the walk-off polarizer and the Faraday rotator. Measurement of the extinction ratio of the resultant walk-off polarizer revealed that the ratio between the vertical and horizontal rays was 1,050:1 with a laser output of 0.032 W and 1,010:1 with a laser output of 2.68 W, thus presenting ratios similar to 1,000:1. In addition, the walk-off polarizer and Faraday rotator constructed in this study were used to compare output changes according to changes in power of input light and to check the penetration ratio. Results from the study presented variations in output value according to changes in power of input light. However, the average penetration ratio remained relatively consistent (~81.4%).

High-performance TDM-MIMO-VLC Using RGB LEDs in Indoor Multiuser Environments

  • Sewaiwar, Atul;Chung, Yeon-Ho
    • Current Optics and Photonics
    • /
    • 제1권4호
    • /
    • pp.289-294
    • /
    • 2017
  • A high-performance time-division multiplexing (TDM) -based multiuser (MU) multiple-input multipleoutput (MIMO) system for efficient indoor visible-light communication (VLC) is presented. In this work, a MIMO technique based on RGB light-emitting diodes (LEDs) with selection combining (SC) is utilized for data transmission. That is, the proposed scheme employs RGB LEDs for parallel transmission of user data and transmits MU data in predefined slots of a time frame with a simple and efficient design, to schedule the transmission times for multiple users. Simulation results demonstrate that the proposed scheme offers an approximately 6 dB gain in signal-to-noise ratio (SNR) at a bit error rate (BER) of $3{\times}10^{-5}$, as compared to conventional MU single-input single-output (SISO) systems. Moreover, a data rate of 66.7 Mbps/user at a BER of $10^{-3}$ is achieved for 10 users in indoor VLC environments.