• 한국광학회지
• /
• 제3권3호
• /
• pp.167-171
• /
• 1992

소금물에 유도된 콜로이드 실리카 응집체의 재구조에 대한 정적 및 유동 광산란 결과를 나타냈다. 또한 투과전자현미경을 이용한 사진결과로부터 입자들 각각의 크기 및 그물 모양으로 갈라진 응집체에 관한 미세구조를 확인하였다. 재구조화된 실리카 응집체에 대한 프랙탈 차원들은 현상태 광산란 측정결과들과 상당히 달랐다. 소금물에 유도된 0.5wt.% 농도의 Ludox-AM에 대한 프랙탈 차원 $D_{F}$는 2.21로 측정되었다. 0.1wt.% 농도의 Ludox-AM에 대한 Rayleigh 선폭을 논의한다.

• Current Optics and Photonics
• /
• 제3권1호
• /
• pp.40-45
• /
• 2019

Adding tunability to biological light emitters offers an unprecedented technique in biological sensing and imaging. Here, we report a tunable, lithographic-free, planar, and ultrathin metal-insulator-metal (MIM) resonator capable of tuning the optical properties solely by a silk/sodium fluorescein hydrogel layer, a biocompatible light emitter. In water, the volume of the resonator was expanded by swelling, and then the resonant mode could be shifted. Simulations predicted the red-shifted resonance peak in transmission when the MIM was swollen in water. The red-shift could be attributed to the increase in the thickness of the silk hydrogel layer due to the absorbed water. The shift of the resonance could affect the fluorescence of the dye in the silk hydrogel layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.340-340
• /
• 2016

We have prepared alumina (Al2O3) doped zinc oxide (AZO) films by DC magnetron sputtering (MS) technique and obtained higher self surface texturing at a high target angle (f). We have characterized the films and applied it as a front electrode of a single junction amorphous silicon solar cell. At a lower f the deposited films show higher values of optical gap (Eg), charge carriers mobility & concentration, crystallite grain size and wider wavelength range of transmission. At higher target angle the sheet resistance, surface roughness, haze factor etc for the films increase. For f=72.5o the haze factor for diffused transmission becomes 6.46% at 540 nm wavelength. At f=72.5o the material shows a reduction in crystallinity and evolution of a hemispherical-type sub-micron surface textures. A Monte Carlo method (MCM) of simulation of the AZO film deposition shows that such an enhanced self-surface texturing of the films at higher f is possible.

• 한국가축번식학회지
• /
• 제19권2호
• /
• pp.105-117
• /
• 1995

This study was carried out to investigate the histomorphological changes and the electrophoretic patterns of egg components, obtained from 100 of 1-year-old female catfish(Silurus asotus). Especially, the light microscopic and ultrastructural changes of ooplasm and follicular membranes of oocytes, were observed by light and transmission electron microscope. All data were collected from October in 1992 to May in 1993. The size of the nucleoli and number of the yolk granules increased as the oocyte grew. Yolk granules were deposited in the oocyte as fluid. Due to the presence of large early and late maturing oocytes, their ovaries were large, transparent, granular, and greenish in color. As the percentages of fish in LMO and RO stage increased from March to April, mean of GSI values(19.95%) increased. Follicle cells such as granulosa cell and thecal cell change a squamous into cuboid shape in LPO and EMO stage. Processes, microvilli, from the granulosa cells and from the oocyte grow and make contact with each other in the pore canals of the zona radiata during vitellogenesis, but are withdrawn as the zona radiate becomes more compact and devoid of pore canals during oocyte maturation. The electrophoretic pattern of major band in mature stage was much thicker(21k, 24k, 32k, 45k, 67∼110k, 170k dalton) than that in previtellogenic phase.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.791-793
• /
• 2006

In the satellite camera, the incoming light source is converted to electronic analog signals by the electronic component for example CCD (Charge Coupled Device) detectors. The analog signals are amplified, biased and converted into digital signals (pixel data stream) in the video processor (A/Ds). The outputs of the A/Ds are digitally multiplexed and driven out using differential line drivers (two pairs of wires) for cross strap requirement. The MSC (Multi-Spectral Camera) in the KOMPSAT-2 which is a LEO spacecraft will be used to generate observation imagery data in two main channels. The MSC is to obtain data for high-resolution images by converting incoming light from the earth into digital stream of pixel data. The video data outputs are then MUXd, converted to 8 bit bytes, serialized and transmitted to the NUC (Non-Uniformity Correction) module by the Hotlink data transmitter. In this paper, the video data streams, the video data format, and the image data processing routine for satellite camera are described in terms of satellite camera control hardware. The advanced satellite with very high resolution requires faster and more complex image data chain than this algorithm. So, the effective change of the used image data chain and the fast video data transmission method are discussed in this paper

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.97-101
• /
• 1989

변형불변 패턴인식을 실현하기 위하여 크기와 회전변위에 대해 불변인 극-로가리즘 좌표변환을 이용하였고, 좌표 변환을 수행하기 위하여 Lee 방식의 투과함수를 갖는 CGH를 CAD용 포토(UV light)패턴 발생기에 의해 마스크로 제작하였다. 광학적으로 좌표변환된 입력패턴은 본 논문에서 제시한 광상관기에 입력되었으며, 실시간 홀로그래피에 의한 기록매질로서 $BaTiO_3$ 단결정을 정합필터로 사용하였다. 본 논문에서 제시한 광상관기를 사용하여 크기와 입력에 대한 자기상관값의 변화를 실험적으로 제시함으로서 변형불변 패턴인식을 증명하였다.

• 대한의생명과학회지
• /
• 제8권1호
• /
• pp.13-20
• /
• 2002

Asadisulphide were purified from Ferrula assafoetida by organic solvent extraction and chromatography. Since ethyl acetate extracts of F. assafoetida has the strongest inhibitory effects on adherence of HL-60 cells, it was reextracted with ethyl acetate, hexane, and ethyl ether and chromatographed three times to isolate asadisulphide. HL-60 cells were grouped into untreated control, TPA-treated, asadisulphide-teated and TPA＋asadisulphide-treated groups, and structural changes of these cells were observed using light microscope, scanning electron microscope and transmission electron microscope to examine the inhibitory effects of asadisulfide on the TPA-induced adherence of HL-60 cells. Light microscopic observations showed that asadisulphide has inhibitory effects on the cell aggregation, extention of cytoplasmic processes and inhibition of substrate adhesion of HL-60 cells. Using scanning and transmission electron microscope, it was observed that cell surfaces and several ultrastructures of TPA-treated HL-60 cell were different from control group, while there were no remarkable differences between asadisulphide-treated and TPA＋asadisulphide-treated group. These results could suggest that asadisulphide has the inhibitory effects on the TPA-induced structural changes of HL-60 cells.

• Korean Membrane Journal
• /
• 제8권1호
• /
• pp.67-73
• /
• 2006

Transparent materials are well known but preparation of transparent poly 2-hydroxyethyl methacrylate {poly (HEMA)} material by varying solvent is a new one and economically reliable. This material is prepared from hydroxyl based monomer HEMA by radical polymerization using benzoyl peroxide (BPO) as initiator and isobutanol, 2-butanol, 1-butanol, hexane and toluene as a solvent. The reaction temperature, time and stirring speed were set at $70^{\circ}C$, 4 hrs and 150 rpm, respectively. The polymer was characterized for functional group by IR spectroscopy. It was observed that the intensity of band at $1637 cm^{-1}$ a characteristic band of C=C stretching disappeared indicating that it was completely consumed after polymerization. It was observed that swelling percentage increases with increase as time passes but after a certain time a constant swelling percentage is achieved. SEM pictures reveals that poly (HEMA) prepared by different solvent shows pore with a distinguishable void up to several micrometers. The BET surface area, cumulative pore volume and average pore diameter is greater in poly (HEMA) prepared by hexane as a solvent compared to other solvents. Poly (HEMA) prepared by 1-butanol as a solvent shows higher glass transition temperature compared to other solvents. Poly (HEMA) prepared by different solvents shows $90{\sim}94%$ light transmission property from light transmission measurement and looks transparent.

• Journal of Communications and Networks
• /
• 제17권4호
• /
• pp.370-383
• /
• 2015

Effective link quality estimation is a vital issue for reliable routing in wireless networks. This paper studies the performance of expected transmission count (ETX) under different traffic loads. Although ETX shows good performance under light load, its performance gets significantly worse when the traffic load is high. A broadcast packet storm due to new route discoveries severely affects the link ETX values under high traffic load, which makes it difficult to find a good path. This paper presents the design and implementation of a variation of ETX called high load - ETX (HETX), which reduces the impact of route request broadcast packets to link metric values under high load. We also propose a reliable routing protocol using link quality metrics, which is called link quality distance vector (LQDV). We conducted the evaluation of the performance of three metrics - HETX, ETX and minimum hop-count. The simulation results show that HETX improves the average route throughput by up to 25% over ETX under high traffic load. Minimum hop-count has poor performance compared with both HETX and ETX at all of the different traffic loads. Under light load, HETX and ETX show the same performance.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.499-505
• /
• 2017

Photoisomerizing molecules which can transform their structure by the light irradiation have great deal for the application of photo-switching devices. And azobenzene is the representive type of the photoisomerizing molecules. It can transform their trans- structures into cis- structure as the light for certain wave lengths they receive. This property shows the potential of ON/OFF switching functionalization which can be used into the nano scale photo switch. Furthermore, many studies are interested in the organic linkers that connect the azobenzene and metal electrodes. We used S, $CH_2S$, $(CH_2)_4S$ as the linker to watch the influence of linkers for electronic properties. So We suggest a photoswitching device based on the vertical junction using the first-principles calculations with density functional theory and non-equilibrium Greens function (NEGF). By analyzing the electronic structure and tunneling current caused by the structural difference of the system between cis- and trans- azobenzene, the difference in switching mechanism, ON/OFF ratio and transmission will be watched as the linker changes. And finally We will suggest which linker would be the better for the optimal device architecture which can achieve high control of the ON/OFF photocurrent ratio. This result will show the potential of azobenzene-based photoswitch and provide the critical insight in constructing the optimal device architecture.