• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.22.2-22.2
• /
• 2011

Reliability and degradation mechanism of conventional phosphor-converted white GaN-based light-emitting diodes (LEDs) were investigated. Under electro-thermal stress condition, the optical output degraded rapidly at the initial stress time accompanied by the change of chromatic properties. This could be attributed to the optical degradation of packaged materials, in particular, the browning of encapsulants and the darkening of reflective packages. At longer stress times, the optical output gradually decreased according to the degree of the reverse leakage currents, namely, the generation ofnonradiative recombination defects. This indicates that the optical degradation of white LEDs are dominated by the darkening of packaged materials and the generation of defects depending on the injection current and ambient temperatures. Using analyses of electroluminescence spectra, optical microscopy, electrical, optical, and thermal properties, optical degradations of white LEDs are discussed.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.123-130
• /
• 2004

The recent large-spatial structures are frequently made from light-weight structural system and it has a good mechanical efficiency and uses new materials. The large space is made by light-weight structural system using tension members mainly, and generally it is called a soft structure. The cable dome structures which are a soft structures are very flexible, the stresses and nodal coordinates of other members are changed when we control the stress of one member. Therefore, we have to do two kind of works for effective and accurate construction of the cable dome structures. The first work is making a working scenario to complete the final objective form and the second is revising constructional errors occurred in process of the actual works. These works are called constructional analysis. At this time, we have to consider geometric nonlinearity to reflect the sensitivity by the initial stresses of cable dome structures, and constructional analysis comes down to a nonlinear problem after all. In this study, we try to approach the constructional analysis of the cable dome structures using the numerical method, and then verify it.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.800-808
• /
• 1998

In this study the thermal stress distribution and deformantion characteristics resulting from the nonuniform temperature fields of the cylinder block of a light 3-cylinder 4-stroke gasoline engine were analyzed using the 3-dimensional finite element method. The temperature distributions req-uisite for the thermoelastic behavior alalysis were obtained from the steady-state heat conduction analysis performed on the basis of experimental data. in order to examine the effect of a ceramic material the cylinder liner was replaced by the silicon nitride($Si_{3}N_{4}$) and its thermal behaviors were compared with those of the original block.

• 소성∙가공
• /
• 제11권4호
• /
• pp.332-340
• /
• 2002

The light guide plate of the TFT-LCD reflects the light originated from the light source, and guides the light to the front side of LCD so that we can see images vividly. This paper is concerned with tile injection molding of the light guide plate for the reflective typed LCD related to IMT-2000. The finite element analysis has been carried out based on the pine stress theory to predict both the thermal stresses of the products in the post-filling stage and the in-plane deformation behavior of the products after ejection process. Based on the simulation results, the mold for the light guide plate of a 2inch sized LCD has been designed.

• 전기학회논문지
• /
• 제65권12호
• /
• pp.2197-2210
• /
• 2016

Recently, the trend of zero emissions has increased in automotive engineering because of environmental problems and regulations. Therefore, the development of battery electric vehicles (EVs), hybrid/plug-in hybrid electric vehicles (HEVs/PHEVs), and fuel cell electric vehicles (FCEVs) has been mainstreamed. In particular, for light-duty electric vehicles, improvement in electric motor performance is directly linked to driving range and driving performance. In this paper, using an improved design for the interior permanent magnet synchronous motor (IPMSM), the EV driving range for the light-duty EV was extended. In the electromagnetic design process, a 2D finite element method (FEM) was used. Furthermore, to consider mechanical stress, ANSYS Workbench was adopted. To conduct a vehicle simulation, the vehicle was modeled to include an electric motor model, energy storage model, and regenerative braking. From these results, using the advanced vehicle simulator (ADVISOR) based on MATLAB Simulink, a vehicle simulation was performed, and the effects of the improved design were described.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.445-451
• /
• 2005

Most of the pollutants from passenger cars are emitted during the cold-transient phase of the FTP-75 test. In order to reduce the exhaust emissions during the cold-transient period, it is essential to warm up the catalyst as fast as possible after the engine starts, and the Unburned Exhaust Gas Ignition (UEGI) technology was developed through our previous studies to help close-coupled catalytic converters (CCC) reach the light-off temperature within a few seconds after cold-start. The UEGI system operates by igniting the unburned exhaust mixture by glow plugs installed upstream of the catalyst. The flame generates a high amount of heat, and if the heat is concentrated on a specific area of monolith surface, then thermal crack or failure of the monolith could occur. Therefore, it is very important to monitor the temperature distribution in the CCC during the UEGI operation, so the local temperatures in the monolith were measured using thermocouples. Experimental results showed that the temperature of CCC rises faster with the UEGI technology, and the CCC reaches the light-off temperature earlier than the baseline case. Under the conditions tested, the light-off time of the baseline case was 62 seconds, compared with 33 seconds for the UEGI case. The peak temperature is well under the thermal melting condition, and temperature distribution is not so severe as to consider thermal stress. It is noted that the UEGI technology is an effective method to warm up the catalyst with a small amount of thermal stress during the cold start period.

• 한국잡초학회지
• /
• 제31권4호
• /
• pp.323-329
• /
• 2011

색소체 transit 서열이 결여된 Bradyrhizobium japonicum ALA-S 유전자를 과발현하는 형질전환 벼의 광역학적 스트레스에 의해 유도되는 항산화반응을 조사하였다. $350{\mu}mol\;m^{-2}\;s^{-1}$ 의 높은 광 수준은 야생형 벼에 비교하였을 때 형질전환 계통인 C4와 C5의 quantum yield를 감소시켰다. 대조적으로, 높은 광수준 하에서 형질전환 계통 C4와 C5의 nonphotochemical quenching (NPQ) 수준은 야생형 계통과 낮은 광 수준 하의 형질전환 계통에 비해 높은 증가를 보여주었다. 형질전환 계통에서 높은 NPQ 수준은 xanthophyll인 zeaxanthin 수준의 증가와 밀접한 관련이 있었다. $150{\mu}mol\;m^{-2}\;s^{-1}$ 의 낮은 광 수준과 비교하였을 때 높은 광 수준에서 violaxanthin 수준이 야생형 벼에서 증가하였으나, 형질전환 C4와 C5 계통에서는 현저하게 감소하였다. 형질전환 벼에서 nonphotochemical energy dissipation과 광보호기작을 가진 xanthophyll 색소가 광역학적 피해를 조절하는데 결정적인 역할을 하는 것으로 생각되나, 이러한 기작이 광역학 스트레스를 극복하지는 못하였고 결과적으로 photobleaching 증상에 이르게 하였다.

• 대한수의학회지
• /
• 제55권2호
• /
• pp.111-116
• /
• 2015

In the present study, the effects of different photoperiods on stress, immunity, and hematological parameters in ICR mice were evaluated. Fifty male ICR mice 7 weeks old (body weight, $27.3{\pm}2.5g$) were divided into five groups: DP-0 (0/24-h light/dark cycle), DP-6 (6/18-h light/dark cycle), DP-12 (12/12-h light/dark cycle), DP-18 (18/6-h light/dark cycle), and DP-24 (24/0-h light/dark cycle). During the experimental period, no significant differences in body weight or feed intake were observed between the groups. Hematological analysis revealed that white blood cell, red blood cell, and hemoglobin values for the DP-0 group were significantly different compared to those of the other groups. After 28 days, no significant difference in serum cortisol concentration was observed among the groups, but serum cortisol levels increased in a light exposure-dependent manner. Total serum immunoglobulin G (IgG) concentrations of the DP-0 and PD-6 groups were significantly increased compared to those of the other groups (p < 0.05), and serum total IgG levels decreased in a light exposure-dependent manner. Results of the present study indicated that various photoperiods affect hematological parameters and total serum IgG levels in ICR mice while having no significant effects on body weight, feed intake, or cortisol levels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.286-287
• /
• 2009

Elasticoluminescence(ESL) is a kind of mechanoluminescence(ML). ESL materials are novel functional materials that can convert elastic deformation energy into visible light directly. Utilizing the materials, novel sensing devices and various applications are now under development. These materials can allow direct viewing of stress distribution.

• Journal of Applied Biological Chemistry
• /
• 제44권2호
• /
• pp.84-86
• /
• 2001

Capsaicin synthesis by suspension cultured cells of Jalapeno pepper (Capcicum annuum L.) was assessed in vitro under various conditions including temperature (23 and $30^{\circ}C$), light intensity (with light and without light), and shaking speed (110 and 200 rpm). Capsaicin production increased, while the cell biomass growth decreased possibly due to the production of a secondary metabolite. Capsaicin synthesis was primarily affected by light condition. Cells cultivated at 110 rpm and $23^{\circ}C$ under light condition yielded the highest fresh weight, while those cultivated under the same condition, but without light resulted in the lowest cell mass. Capsaicin content in cells of 18-day-old pepper grown at 110 rpm and $23^{\circ}C$ under light was 0.125% of the cell mass. However, without light treatment, the capsaicin content in cells at the same shaking speed and temperature increased up to 169%, indicating no light is favored in the capsaicin synthesis by Jalapeno pepper. Increasing the shaking speed from 110 to 200 rpm without light enhanced the capsaicin synthesis. Results of this study demonstrate that light condition is the limiting factor in the synthesis of capsaicin in tissue-cultured Jalapeno pepper cells.