• Journal of Satellite, Information and Communications
• /
• v.11 no.1
• /
• pp.32-36
• /
• 2016

In this paper, a transceiver of VLC (Visible Light Communication) using LED white lighting has been implemented. We analyzed differences between conventional wireless communication and VLC with high-speed data transmission in a variety of environments, and confirmed symbols which passed through a channel using QAM. In order to get a high data rate, we found some variables that should be considered essentially though experiments. In addition, we set a bandwidth and found an optimal gain according to the distance between transmitter and receiver. We analyzed proposed system model through Labview and finally showed a system performance and to efficient data transmission and detection for VLC, we apply the orthogonal sequences to VLC system.

• BMB Reports
• /
• v.29 no.6
• /
• pp.535-539
• /
• 1996

The activation of phospholipase D (PLD) catalyzes hydrolysis of phosphatidylcholine (PC) to phosphatidic acid (PA) and choline in plants as well as animals. To determine the presence of PLD in oat cells, we prepared inside-out plasma membrane and cytosolic fractions from oat tissues. PLD activities in both cytosol and plasma membrane were detected by ion chromatography method. The activity of PLD in plasma membrane was dependent upon $Ca^{2+}$ concentration and was heat stable. To investigate whether G-protein couples to PLD, the effects of $GTP{\gamma}S$ and $GDP{\beta}S$ on the PLD activity were measured. PLD activity was dramatically increased 300~400% in the presence of 50 ${\mu}M$ $GTP{\gamma}S$ but not in the presence of 50 ${\mu}M$ $GDP{\beta}S$. These results indicate that G-protein may be involved in regulation of PLD activity. To identify whether PLD is regulated by red light receptor, phytochrome, we irradiated red, far-red, or red/far-red/red light on oat protoplasts. PLD activity has increased 5-fold and 3-fold by treatment with red light and red/far-red/red light, respectively. In contrast, irradiation with far-red light had little or no effect on PLD activity. These results suggest that phytochrome regulates PLD activity through activation of G-protein in oat cells.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.527-532
• /
• 2013

The wireless visible light communication technology has received great attention for high-data rate services in the room and underwater. However, performance of a visible light seawater link is limited by multiple constraints from the current light source and detector technology, and underwater channel conditions. In this paper, performance of the line of sight underwater link was analyzed in terms of signal to noise ratio and bit error rate of the detector. Roles of different parameters such as data rate, transmission distance, and attenuation coefficient, are studied. Through the modeling and simulation of the OOK and L-PPM modulation technologies for undersea environment application, the advantages and limitations are described in detail.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.27 no.6
• /
• pp.237-244
• /
• 2023

This study analyzes the seismic response of traffic light poles, considering soil-foundation effects through nonlinear static and time history analyses. Two poles are investigated, uni-directional and bi-directional, each with 9 m mast arms. Finite element models incorporate the poles, soil, and concrete foundations for analysis. Results show that the initial stiffness of the traffic light poles decreases by approximately 38% due to soil effects, and the drift ratio at which their nonlinear behavior occurs is 77% of scenarios without considering soil effects. The maximum acceleration response increases by about 82% for uni-directional poles and 73% for bi-directional poles, while displacement response increases by approximately 10% for uni-directional and 16% for bi-directional poles when considering soil-foundation effects. Additionally, increasing ground motion intensity reduces soil restraints, making significant rotational displacement the dominant response mechanism over flexural displacement for the traffic light poles. These findings underscore the importance of considering soil-foundation interactions in analyzing the seismic behavior of traffic light poles and provide valuable insights to enhance their seismic resilience and safety.

• Design & Manufacturing
• /
• v.18 no.2
• /
• pp.41-50
• /
• 2024

In this study, experimental design methods were used to derive optimal process conditions for improving the thickness uniformity of a 0.40 mm, 3.5 inch light guide panel. Process mapping and expert group analysis were used to identify factors that influence the thickness of injection molded products. The key factors identified were mold temperature, mold temperature, injection speed, packing pressure, packing time, clamp force, and flash time. Considering the resin manufacturer's recommended process conditions and the process conditions for similar light guide plates, a three-level range was selected for the identified influencing factors. L27 orthogonal array process conditions were generated using the Taguchi method. Injection molding was performed using these L27 orthogonal array to mold the 3.5 inch light guide plates. Thickness measurements were then taken, and the results were analyzed using the signal-to-noise ratio to maximize the CpK value, leading to the determination of the optimal process conditions. The thickness uniformity of the product was analyzed by applying the derived optimum process conditions. The results showed a 97.5% improvement in the Cpk value of 3.22 compared to the process conditions used for similar light guide plates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.575-583
• /
• 2000

Pulse oximetry is a well established non-invasive optical technique for monitoring the $SpO_2$ during anaesthesia, recovery and intensive care. Pulse oximeters determine the oxygen saturation level of blood by measuring the light absorption of arterial blood. In the measurement of the hemoglobin oxygen saturation, conventional method has required the technique of filtering of remove the noise, and of complex signal processing algorithm. So much time have been required to signal processing. In this research, we separate AC signal and DC signal in the stage of signal detection. Therefore we simplify the calculation algorithm for $SpO_2$. The implemented system have the high performance such an accuracy and a processing time than the traditional method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.286-291
• /
• 2013

Home CATV networks comprise coaxial cables and signal splitters which have less than ideal characteristics. Home network testing facilities use long lengths of coaxial cables, often undesirably coiling and bending the cable, stressing joints on connectors. Cable connectors, cable placement, bending and flexing can cause leakage of signals and can result in undesired signal paths in a system causing deteriorated performance. The purpose of this paper is to bring to light the issues of signal leakage and radiation from shielded media such as RG-59 and RG-6 coaxial cables, furthermore signal splitters have less than ideal characteristics.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.3
• /
• pp.141-146
• /
• 2008

The purpose of this study is to develop the algorithm which can control muscle power assist robot especially for elderly. Recently, wearable robots for power assistance are developed by many researchers, and its application fields are also variable such as for medical or military equipment. However, there are many technical barriers to develop the wearable robot. This study suggest a control method improving performance of a wearable robot system by using a EMG signal of major muscles and a force sensor signal as command signal of system. The result of the robot Prototype efficiency experiment, the case of Maximum Isometric motion it suggest 100% power of muscle, the man need only 66% of MVIC(Maximum Voluntary Isometric Contraction) to lift 5kg dumbbell without robot assist. However the man needs only 52% of MVIC to lift 5kg dumbbell with robot assist. Therefore 20% muscle power increased with robot assist. Also, we designed light weight robot mechanism that extract the command signal verified and drive the wanted motions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.643-648
• /
• 2011

In this study, SMPS driven LED traffic signal light for Large-scale traffic such as railroad and airport was designed and its electrical and EMI characteristics were measured. The output current of the LED module driven by SMPS was 1.67A for AC and DC input voltage over 10V. The conducted emission measured over 0.15~30MHz frequency range was lower than the allowed quasi-peak and average level, and the radiated noise measured over 30~1000MHz frequency range showed $23.96dB{\mu}V/m$ at 59.96MHz.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.8
• /
• pp.7-13
• /
• 2015

Recently, there are serviced user customized advertisement of various type using smart device. Representative services are advertisement service using light of smart TV screen or audible sound of smart TV to transmit advertisement information. However, those services have to do a specific action of smart device user for advertisement information or need audible audio information of TV contents. To overcome those weakness, therefore, we propose an advertisement method using inaudible sound of speaker based on smart device. This method supports the transfer of advertising content to the smart device user with no additional action or TV audio signal required to access that content. The proposed method used two high frequencies among 18kHz ~ 22kHz of audible frequency range which smart TV can send out. And it generates those frequencies synthesized with audio of TV contents as trigger signal which can send advertisements to smart device. Next, smart device analysis the trigger signal and request advertisement contents related to the signal to server. After then, smart device can show the downloaded contents to user. Because the proposed method uses the high frequencies of sound signals via the inner speaker of the smart device, its main advantage is that it does not affect the audio signal of TV content. To evaluate the efficacy of the proposed method, we developed an application to implement it and subsequently carried out an advertisement transmission experiment. The success rate of the transmission experiment was approximately 97%. Based on this result, we believe the proposed method will be a useful technique in introducing a customized user advertising service.