• 농업과학연구
• /
• 제29권1호
• /
• pp.55-65
• /
• 2002

The most representative fruit in Yanbian area is Applepear(Ping Guo Li). It has been a important resource of farm income. According to the economic growth and income Increase of individual consumers, food consumption pattern will be changed from grain to high value cash crops such as Applepear and vegetables. The globalization and adapt ion of free market oriented economic policy of China government have led to change the collective farming system to individual farm management system. The institutional transformation have brought about high productivity of farm products and incomes of farmers. Therefore the plantation area of Applepear and requirement of investment cost for establishment of Applepear farms have increased rapidly since the 1980's, the time of perestroika and glasnost in Chinese economy. In prosperity of Chinese agriculture, individual farmer's decision making as free selection of farmland use, selection of high pay-off crops, free sale of the products in free market and credit support for the project might be the most important factors. In case of Applepear farm development, net present value of the project net benefit was estimated at 55.518won per hectare and financial rate of return was 21%. The benefit/cost ratio of the project was 2.11. Considering 10% of discounting rate or the opportunity cost of capital in China the Applepear farm development project showed us economically feasible in the light of the above efficiency indices. The Chinese government has to support Applepear farm development project financially and institutionally considering the high-payoff benefit of the fruit and farmer's in come increase in the future.

• 한국지반공학회논문집
• /
• 제19권3호
• /
• pp.23-31
• /
• 2003

지난 반세기 동안 검측공 탄성파시험은 시험 장비 및 그 배치에 따라 크로스홀, 다운홀, 서스펜션로깅과 같은 시험으로 발전하였다. 이런 현장시험은 장비와 시험기법이 꾸준히 개선되어 지반 및 지진공학 분야의 부지특성규명에 매우 값진 기술이 되었다. 그러나 이 기술은, 공학적 의의와 중요성에도 불구하고, 표준관입 시험처럼 실무에 보편적으로 적용되지 못하고 있다. 그 이유는 장비가 복잡 정교할 뿐만 아니라, 사용하기 어렵고 비싸기 때문이다. 이 연구에서는 경제적이고 실용적인 지반의 동적물성치 계측 기술 개발을 목표로 하여 인홀 시험법을 연구하였다. 이 연구에서 개발한 인홀장비 시작품은 NX 크기의 검측공에 사용하고 맨손으로 다룰 정도로 작고 가볍다. 이 장비의 발진장치는 여러 현장에서 크로스홀시험을 통하여 그 성능을 검증하였고 꾸준히 개선되고 있다. 세 현장에서 인홀시험을 수행하고 그 결과를 크로스홀시험 결과와 비교하여 타당성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.112-121
• /
• 2016

AFLS (Adaptive front lighting system) is being applied to improve safety in driving automotive at night. Safe embedded system design for controlling head-lamps is required to improve noise robust ECU hardware and software simultaneously by considering safety requirement of hardware-dependent software under severe environmental noise. In this paper, we propose an adaptive headlight controller with a newly-designed symmetric angle sensor compensator, especially based on the proposed steering-swivel angle lookup table to determine whether the current controlling target is safe. The proposed system includes an additional backup hardware to compare the system status and provides safe swivel-angle management using a controlling algorithm based on the pre-defined lookup table (LUT), which is a symmetric mapping relationship between the requested steering angle and expected swivel angle target. The implemented system model shows that the proposed architecture effectively detects abnormal situations and restores safe status of controlling the light-angle in AFLS operations under severe noisy environment.

• 한국가스학회지
• /
• 제13권6호
• /
• pp.39-43
• /
• 2009

가솔린 엔진은 전 세계적으로 중소형 및 대형차 등 전반적으로 사용되고 있으며, 장기적으로 차량 부하에 따른 배기가스의 증가가 주변 환경에 대한 위협이 가중되고 있어 여기에 대한 대처가 필요하다. CNG엔진은 기존의 가솔린 SI 엔진에 비하여 유해 배출가스 농도가 적어 다른 연료에 비해여 청정연료로서 유리하며, 많은 관련 연구자들이 여기에 대한 여러 논문을 통하여 잠재적 청정연료로서 확인되었다. 출력과 열효율의 측면에서 약간 가솔린 연료에 비하여 떨어지지만 일산화탄소와 탄화수소 배출량은 유리하며, 질소산화물은 약간 증가하는 현상이 나타났다. 본 논문에서는 기존 가솔린엔진과 CNG엔진의 배출물을 비교 검토하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1397-1399
• /
• 2003

When and Where, What kind of agricultural products will be produced and provided for the market? It is a commercial requirement, and also an academic questions to remote sensing technology. Crop physiology analysis and growth monitoring are important elements for precision agriculture management. Remote sensing technology supplies us more selections and available spaces in this dynamic change study by producing images of different spatial, spectral and temporal resolutions. Especially, the hyperspectral remote sensing should do play a key role in crop growth investigation at national, regional and global scales. In the past five years, Chinese academy of sciences and Japan NTT-DATA have made great efforts to establish a prototype information service system to dynamically survey the vegetable planting situation in Nagano area of Japan mainly based on remote sensing data. For such concern, a flexible and light-duty flight system and some practical data processing system and some necessary background information should be rationally made together. In addition, some studies are also important, such as quick pre-processing for hyperspectral data, Multi-temporal vegetation index analysis, hyperspectral image classification in support of GIS data, etc. In this paper, several spectral data analysis models and a designed airborne platform are provided and discussed here.

• Earthquakes and Structures
• /
• 제18권6호
• /
• pp.677-689
• /
• 2020

A building structural system of moment resisting frame (MRF) with concrete filled steel tubular (CFST) columns and wide flange H beams, is one of the most conveniently constructed structural systems. However, there were few studies on evaluating seismic performance of full-scale CFST columns under high axial compression. In addition, some existing famous design codes propose various limits of width-to-thickness ratio (B/t) for steel tubes of the ductile CFST composite members. This study was intended to investigate the seismic behavior of CFST columns under high axial load compression. Four full-scale square CFST column specimens with a B/t of 42 were carried out that were subjected to horizontal cyclic-reversal loads combined with constantly light, medium and high axial loads and with a linearly varied axial load, respectively. Test results revealed that shear strength and deformation capacity of the columns significantly decreased when the axial compression exceeded 0.35 times the nominal compression strength of a CFST column, P₀. It was obvious that the higher the axial compression, the lower both the shear strength and deformation capacities were, and the earlier and faster the shear strength degradation occurred. It was found as well that higher axial compressions resulted in larger initial lateral stiffness and faster degradation of post-yield lateral stiffness. Meanwhile, the lower axial compressions led to better energy dissipation capacities with larger cumulative energy. Moreover, the study implied that under axial compressions greater than 0.35P₀, the CFST column specimens with B/t limits recommended by AISC 360 (2016), ACI 318 (2014), AIJ (2008) and EC4 (2004) codes do not provide ultimate interstory drift ratio of more than 3% radian, and only the limit in ACI 318 (2014) code satisfies this requirement when axial compression does not exceed 0.35P₀.

• 한국농림기상학회:학술대회논문집
• /
• 한국농림기상학회 2013년도 추계 학술발표논문집
• /
• pp.28-29
• /
• 2013

We have been measuring $CH_4$ flux in a rice paddy in Gimje using the eddy covariance method since July 2011. In order to measure the fast fluctuations of $CH_4$ concentration, an innovative LI-7700 open-path laser spectrometer is used. This high-precision, low power, light weight, low maintenance sensor enables us to operate it on a continuous and long-term basis. One particular feature, among other things, is the self-cleaning lower mirror which decreases maintenance requirements while ensuring more robust, continuous, high-quality dataset. Its cleaning is initiated at user-specified time intervals or a signal strength threshold, and its status is recorded as a diagnostic index. We have noticed that the operation of LI-7700 at Gimje site is quite challenging particularly due to its frequent mirror cleaning requirement and the associated sensitivity of the instrument. In this presentation, we present some field observation data regarding the mirror cleaning and their analysis, thereby suggesting the pertinent operation options for high-quality, maximum data retrieval in the field.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.153-184
• /
• 2015

Most damaging earthquakes come as complex sequences characterized by strong aftershocks, sometimes by foreshocks and often by multiple mainshocks. Complex earthquake sequences have enormous seismic hazard, engineering and societal implications as their impact on buildings and infrastructures may be much more severe at the end of the sequence than just after the mainshock. In this paper we examine whether historical sources can help characterizing the rare earthquake sequences of pre-instrumental times in full, including fore-, main- and aftershocks. Thanks to the its huge documentary heritage, Italy relies on one of the richest parametric earthquake catalogues worldwide. Unfortunately most current methods for assessing seismic hazard require that earthquake catalogues be declustered by removing all shocks that bear some dependency with those identified as mainshocks. We maintain that this requirement has led most modern historical seismologists to focus mainly on mainshocks rather than also on the fore- and aftershocks. To shed light onto major earthquake sequences of the past, rather than onto individual mainshocks, we investigated 10 damaging earthquake sequences ($M_w$ 4.7-7.0) that hit the L'Aquila area and central Abruzzo from the 14th to the 20th century. We find that most of the results of historical research are important for modern seismology, yet their rendering by the current parametric catalogues causes most information to be lost or not easily transferred to the potential users. For this reason we advocate a change in current strategies and the creation of a more flexible standard for storing and using all the information made available by historical seismology.

• 한국전자통신학회논문지
• /
• 제14권1호
• /
• pp.257-264
• /
• 2019

본 논문에서는 픽셀 기반 joint BDCP (bright and dark channel prior)와 계층적 양방향 필터를 적용하여 저 복잡도를 갖는 단일 영상 기반 안개 제거 기법을 제안한다. 픽셀 기반 joint BDCP는 기존의 패치 기반 DCP에 비해 연산량을 감소시키고, 픽셀 단위의 안개값 예측을 가능하게 하여 전달량 추정의 정확성을 높인다. 또한 에지를 보존하면서 평탄화 성능이 우수한 양방향 필터를 사용하여 전달량을 정련함으로써 후광 효과(halo effect)를 줄이고, 에지 성분에 대한 계층적 적용을 통해 반복 적용에 의한 연산량의 증가를 방지한다. 안개 성분이 포함된 다양한 영상에 대해 수행한 실험 결과는 제안하는 기법이 기존의 기법에 비해 우수한 안개 제거 성능을 보이면서 저 복잡도로 실행되어 다양한 분야에 응용될 수 있음을 나타낸다.

• 한국산림과학회지
• /
• 제88권3호
• /
• pp.292-298
• /
• 1999

낙엽성 활엽수 6수종을 5수준의 피음도로 처리한 후 이들의 수분통도성을 Huber value와 leaf specific conductivity(LSC) 보서 조사하였다. 처리 1차 연도에 피음하지 않은 조건에서 측정된 전체조사 대상 수종의 Huber value는 6, 7, 9원에 각각 $1.5{\sim}9.1mm^2/dm^2$, $1.3{\sim}2.6mm^2/dm^2$, $1.5{\sim}5.3mm^2/dm^2$의 범위 내에 있었다. 그 값은 일반적으로 대부분의 수종에서 피음도를 높이면서 감소하는 경향을 보였다. 9월에는 조기 낙엽 현상 때문에 측정치 대부분이 7월에 측정된 값보다 높았다. Huber value는 대부분의 조사 수종에서 처리 1, 2차 연도에 따른 측정치간에 차이를 보였지만 그 값의 계절적인 변이나 피음에 따른 영향은 처리 연도에 상관없이 비슷한 경향을 보였다. 2년간 진행된 조사에서 leaf specific conductivity는 자작나무, 박달나무, 느티나무, 고로쇠나무의 경우에 $4.0{\sim}80.0{\mu}{\ell}/dm^2$ 범위내의 값에서 측정 계절이나 피음 수준에 따른 변이를 보였다. 그리나 쥐똥나무와 산벚나무의 경우에는 상기 수종들의 값과는 차이를 보이면서 각기 $4.0{\sim}280.0{\mu}{\ell}/dm^2$, $8.0{\sim}120{\mu}{\ell}/dm^2$의 값은, 나타냈다. LSC 값은 수종 별, 그리고 처리 연도 별로 계절에 따라 나소 불규칙한 변화를 보였으며 처리 1차 연도에는 자작나무, 박달나무, 산벚나무, 처리 2차 연도에는 느티나무, 산벚나무에서 대부분 7월보다는 9월에 보다 높은 LSC값을 나타냈다. LSC값은 조사된 모든 수종에서 인위적인 피음 수준을 높힐수록 대체로 감소하는 경향을 보였다.