• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.482-487
• /
• 2016

Ultra-violet rays are very harmful to eye health care. The blocking of ultra-violet rays and a reduction of optical reflection in the visible light range, which is to increase the share of transmitted light, and avoid the formation of ghost images in imaging, are important for the applications of polymer eyeglasses lenses. In this study, the high-refractive index polymer lenses, n=1.67, were fabricated by injection-molded method with the xylene diisocyanate monomer, 2,3-bis-1-propanethiol monomer, and benzotriazol UV absorber (SEESORB 709) mixture. To reduce the reflection of the polymer lens surfaces, multi-layer anti-reflection (AR) coatings were coated for both sides of the polymer lens using an E-beam evaporation system. The optical properties of the UV blocking polymer lens were characterized using a UV-visible spectrometer. The material properties of the thin films, which were composed AR coating layers, refractive index, and surface roughness, were analyzed by ellipsometry and atomic force microscopy. As a result, the fabricated polymer lens perfectly blocked ultra-violet rays below 395 nm with a blocking rate greater than 99%.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.145-150
• /
• 2004

The LED lighting used spot-light illuminate the limited surface. So it is a key-point to condense wide emission angle of high power light emitting diodes (LEDs) to narrow that angle. In this paper, the secondary optics was designed by lens-makers formula for concentration rays of LED into specific region. So, it simulated the optics that designed by lens makers-formula in the optical design program, LightTools. And then, show the p propriety of lens design utilizing simulation result, luminous intensity, emission angle.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.4
• /
• pp.15-19
• /
• 1999

Three wood coffins of Chosun Dynasty period buried about 450 years ago were excavated in the sound condition in Andong area in the early 1998. The proprietors of wood coffins were grandparents, Mr. Myoung Jong Lee and Mrs. Mun, and their grandson, Mr. Eung Tae Lee, and the social standing of their family was known to belong to the nobility in those days by the clan genealogy. All the wood coffins investigated through light microscopy had same anatomical characteristics as follows: abrupt to somewhat abrupt tracheid transition from earlywood to latewood; normal longitudinal and horizontal resin canals with thin-walled epithelium; tylosoids in resin canals; bordered pits frequently in 1 row on radial walls of tracheids; 1 or 2 window-like pits per cross-field; uniseriate and fusiform rays; heterogeneous rays composed of body ray parenchyma cells and marginal ray tracheids or homgeneous rays composed of only ray tracheids; dentate ray tracheids; occasional trabeculae traversing tracheids in radial direction. Based on theses microscopic characteristics, all the wood coffins were identified to be Korean red pine (Pinus densiflora) or Korean black pine (Pinus thunbergii). Korean black pine growing naturally in coastal area might not be probable because the site of excavation, Andong area, was mountainous and inland area of Korea Thus, Korean red pine was thought to be the possible species for the wood coffins because of its natural distribution through the Korean Peninsula and the easy availability.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.56-60
• /
• 2014

Highly concentrated sunlight obtained from a solar concentrator mounted on a solar tracker can be divided into the infrared and visible region before it is actually applied. That is, solar rays are directed toward a unit optically separating sunlight into the infrared and visible region by a hot mirror as they impinge on the surface of a secondary reflector. The Infrared rays can be utilized for thermoacoustic applications while visible rays can be utilized for indoor lighting. This work introduces the separation of two different kinds of light; sunlight and artificial light. As for the artificial light, its wavelength extended from 400m to 720m for the visible region and 620m to 940m for the infrared region. Comparatively, a series of tests performed on sunlight revealed its separation in the visible region from 460m to 680m whereas from 620m to 940m for the artificial light.

• Fisheries and Aquatic Sciences
• /
• v.6 no.2
• /
• pp.97-100
• /
• 2003

The Japanese codling fish, Physiculus japonica (family Moridae) is recorded as new to the Korean fish fauna. The specimen was fished from the South-Eastern waters off Jeju Island, Korea in March 1999. Standard length of the specimen was 343.2 mm, with a thin barbel on ower jaw, 67 soft second dorsal rays, 71 soft anal rays and 12 lateral-line above scales. Identification key of this specimen as P. japonica in the family Moridae was teethless vomer, chin barbel and well-developed black ventral light organ located on the anterior of anus. We give a new Korean name Dol-dae-gu for P. japonica.

• Publications of The Korean Astronomical Society
• /
• v.15 no.spc1
• /
• pp.113-118
• /
• 2000

A magnetic cataclysmic variable has a rotating magnetic white dwarf which accretes matter from its late type companion. Kim & Beuermann (1995) presented a phenomenological model of the accretion from its surrounding structure e.g., a disk into the magnetosphere of the white dwarf, and presented results for the spin modulated X-ray spectrum and light curves. Using this model, we calculate the optical continuum and line emission which result from reprocessing of X-rays in the accretion stream within the magnetosphere. Penning (1985) suggested the observed spin-modulated radial-velocity variations might result from reprocession of X-rays in the disk. We, however, find the radiation can be originated from the magnetosphere accretion stream. We use the same geometrical model to calculate the optical and the X-ray behaviour. The results from the two wavelength bands are internally consistent. We conclude that this approach will increase the diagnostic accuracies of the results.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.77-77
• /
• 2002

Cotton fabrics dipped in cationic agent(3-chloro-2-hydroxypropyl trimethyl ammonium chloride) were irradiated with deep Ultra Violet Rays(UV), in the region of UV-C using the low pressure mercury lamp. The chemical changes of cationized cotton fabric surfaces were investigated by FT-IR analysis. The dyeabilities of the irradiated portions were investigated by dyeing with acid dyes. Deep UV(UV-C) irradiation broke O-H bonds in cotton fiber and oxidized the fibers. The dyeability of the UV irradiated portion were different from that of the portion not irradiated. Various pattern were gained from one bath dig dyeing by pattern mask. The tensile strengths of cotton fabrics were decreased in the UV irradiated portion. Washing fastness of cotton dyeings were good about 3∼4 grade and light fastness were fair about 2∼3 grade.

• Textile Coloration and Finishing
• /
• v.14 no.2
• /
• pp.1-8
• /
• 2002

Cotton fabrics dipped in cationic agent(3-chloro-2-hydroxypropyl trimethyl ammonium chloride) were irradiated with deep Ultra Violet Rays(UV), in the region of UV-C using the low pressure mercury lamp. The chemical changes of cationized cotton fabric surfaces were investigated by FT-IR analysis. The dyeabilities of the irradiated portions were investigated by dyeing with acid dyes. Deep UV(UV-C) irradiation broke O-H bonds in cotton fiber and oxidized the fibers. The dyeability of the UV irradiated portion were different from that of the portion not irradiated. Various pattern were gained from one bath dig dyeing by pattern mask. The tensile strengths of cotton fabrics were decreased in the UV irradiated portion. Washing fastness of cotton dyeings were good about 3∼4 grade and light fastness were fair about 2∼3 grade.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.02a
• /
• pp.141-142
• /
• 2008

In order to develop a simple ray tracing model for simulating the radiation pattern of a LED, the propagation of a ray within the LED capsule was systematically evaluated by considering refraction and reflection from the capsule-air interface, multiple reflection within the capsule, and total internal reflection at the boundary. It was found that concentric ring shapes on the radiation pattern was formed by the rays multiple-reflected from the capsule surface, and that the strength of these rays were decreased rapidly as the number of multiple reflection is increased.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.27-31
• /
• 2012

This paper presents a study on the design of photovoltaic system with reversal tracking reflector. The reversal tracking reflector is conceptually designed by using TRIZ. The 20 to 30% of incident rays cannot produce the current and reflected back to the glass surface because of high refractive index of solar cell which are produced from Si, GaAs. The solution of this problem has been derived using 6SC(6 steps creativity)TRIZ. The reflector which has the actuator can be trackback the sun. Reversal tracking reflector which mounted on the top of the system prevents the shadowing loss and improve the efficiency of track back function. The anti-glare reflector prevents the heat due to the concentrated reflected light rays.